TIMEX 02M-395000-01 Digital Watch User Guide

: August 21, 2024
: Timex

Table of Contents

TIMEX 02M-395000-01 Digital Watch
Product Information
Product Usage Instructions
Frequently Asked Questions
Safety Warning
Register your product
FEATURES AND BASIC OPERATION
STOPWATCH
WATER AND SHOCK RESISTANCE
WARRANTY
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

TIMEX 02M-395000-01 Digital Watch

Product Information

Specifications:

Water-Resistance Depth: 30m/98ft, 50m/164ft, 100m/328ft
Water Pressure Below Surface: 60 p.s.i.a, 86 p.s.i.a, 160 p.s.i.a
Battery: Button cell or coin battery (not user-replaceable)

Product Usage Instructions

Setting Time and Date:

With time and date showing, press and hold SET for 2 seconds. Seconds will flash.
Press START/STOP to set the seconds to zero.
Press MODE. The hour will flash. Use START/STOP to change the hour (including AM/PM).
Press MODE. Minutes will flash. Use START/STOP to change minutes.
Continue pressing MODE to set the year, month, and date accordingly.
Press SET at any step to exit and save settings.

Setting Daily Alarm:

Press MODE repeatedly until “AL” appears.
Press SET. The hour will flash. Use START/STOP to set the desired alarm hour.
Press MODE. Minutes will flash. Use START/STOP to set the alarm minutes.

Using Stopwatch:

To display time in a second-time zone, press MODE until “T2” appears.
Press SET to start setting the second time zone’s hour and minutes.
Press SET again when done setting.

Water and Shock Resistance:

Rinse the watch with fresh water after exposure to saltwater.
Avoid pressing any buttons underwater to maintain water-resistance.
The watch is not suitable for diving.

Battery Replacement:
The button cell or coin battery should only be replaced by a professional jeweler or technician.

Frequently Asked Questions

Q: Can I replace the watch battery myself?

A: No, the button cell or coin battery should be replaced by a professional only.

Q: How do I silence the daily alarm?

A: Press any button when the alarm sounds to silence it; otherwise, it will sound for 60 seconds.

Q: Is the watch suitable for diving?

A: No, the watch is not recommended for diving purposes.

Safety Warning

INGESTION HAZARD: This product contains a button cell or coin battery.
DEATH or serious injury can occur if ingested.
A swallowed button cell or coin battery can cause Internal Chemical Burns in as little as 2 hours.
KEEP new and used batteries OUT OF REACH of CHILDREN
Seek immediate medical attention if a battery is suspected to be swallowed or inserted inside any part of the body.
Remove and immediately recycle or dispose of used batteries according to local regulations and keep away from children. Do NOT dispose of batteries in household trash or incinerate them.
Even used batteries may cause severe injury or death.
Call a local poison control center for treatment information.
Battery type: lithium metal, CR2032.
Nominal battery voltage: 3.0 V
Non-rechargeable batteries are not to be recharged.
Do not force discharge, recharge, disassemble, heat above 158°F (70ºC) or incinerate. Doing so may result in injury due to venting, leakage or explosion resulting in chemical burns.
Ensure the batteries are installed correctly according to polarity (+ and -).
Do not mix old and new batteries, different brands or types of batteries, such as alkaline, carbon zinc, or rechargeable batteries.
Remove and immediately recycle or dispose of batteries from equipment not used for an extended period of time according to local regulations.
Always completely secure the battery compartment. If the battery compartment does not close securely, stop using the product, remove the batteries, and keep them away from children.

Register your product

083-095000-03
Register your product at https://www.timex.com/product-registration.html.

Please read the instructions carefully to understand how to operate your Timex® watch.

FEATURES AND BASIC OPERATION

Your model may not have all of the features described in this booklet.

Date with MM-DD (month/day) format
2 time zones
Alerts with audible tone
Optional hourly chime
24-hour stopwatch
Daily alarm
INDIGLO® night-light

Press MODE repeatedly to step through modes: Alarm, Stopwatch and 2nd Time Zone. Press MODE to exit current mode and return to Time mode.

Button functions are shown with setting functions in parentheses

TIME
To set time and date:

With time and date showing, press SET and hold for 2 seconds.
Seconds flash. Press START/STOP to set the seconds to zero.
Press MODE. Hour flashes. Press START/STOP to change the hour, including AM (no symbol) and PM.
Note: Press and hold START/STOP to rapidly advance changes.
Press MODE. Minutes flash. Press START/STOP to change minutes; hold the button to scan values.
Press MODE. Year flashes. Press START/STOP to change the year.
Press MODE. Month flashes. Press START/STOP to change the month.
Press MODE. Date flashes. Press START/STOP to change the date.
Press SET, at any step, to exit and save settings.
- With the time and date showing, press SET to switch between 12- or 24-hour time format.
- The date (day of the month) appears in the upper part of a display in Time mode. Press and hold START/STOP to see month, date, and year in large digits.

ALARM
The watch has a daily alarm. Press MODE repeatedly until AL appears.

To set alarm:

Press SET. Hour flashes. Press START/STOP to change the hour, including AM (no symbol) and PM.
Press MODE. Minutes flash. Press START/STOP to change minutes; hold the button to scan values.
Press SET, at any step, when done setting.

To turn on/off alarm and hourly chime, press START/STOP repeatedly. Watch will step through four combinations of alarm and chime settings. Alarm icons appears when alarm is on. CHIME icon b appears when hourly chime is on – watch will chime on every hour.
When alarm sounds, press any button to silence. If no button is pressed, alarm will sound for 60 seconds.
The alarm repeats daily unless turned off.

STOPWATCH

This mode provides a stopwatch function for timing events. Press MODE repeatedly until SP appears.
To start, press START/STOP. Stopwatch counts up by hundredths of a second up to 30 minutes, then by seconds up to 24 hours before starting over.
To stop, press START/STOP.
To resume, press START/STOP, or to reset (clear) the stopwatch, press SET.
While stopwatch is running, press SET to take lap/split and see your time up to that point. Display freezes while stopwatch continues to run. Press SET to resume display of running stopwatch.
The stopwatch continues to run if you exit mode.

TIME 2
The watch can display time in a second-time zone. Press MODE repeatedly until T2 appears.

To set 2nd time zone’s time:

Press SET. Hour flashes. Press START/STOP to change the hour, including AM (no symbol) and PM.
Press MODE. Minutes flash. Press START/STOP to change minutes by 30 from minutes in Time mode. Seconds are the same as in Time mode and can only be set there.
Press SET, at any step, when done setting.

INDIGLO® NIGHT-LIGHT
Press INDIGLO® button to illuminate watch display for 2-3 seconds. Electroluminescent technology used in the INDIGLO® night-light illuminates entire watch face at night and in low light conditions.

WATER AND SHOCK RESISTANCE

If your watch is water-resistant, meter marking or ( ) is indicated.

*pounds per square inch absolute

WARNING:
TO MAINTAIN WATER RESISTANCE, DO NOT PRESS ANY BUTTONS UNDER WATER.

The watch is water-resistant only as long as the lens, push buttons and case remain intact.
The watch is not a diver watch and should not be used for diving.
Rinse the watch with fresh water after exposure to salt water.
Shock resistance will be indicated on the watch face or caseback. Watches are designed to pass the ISO test for shock resistance. However, care should be taken to avoid damaging the crystal/lens.

BATTERY
The watch button cell or coin battery is not intended to be replaced by a consumer. Only a jeweler or other professional is to replace the battery.