Schuller 306094 Gold Leaf Linear LED Loop Pendant Light Installation Guide
- August 21, 2024
- Schuller
Table of Contents
Schuller 306094 Gold Leaf Linear LED Loop Pendant Light
Specifications
- Operating voltaje: DC3V
- Operating current: <15mA
- Remote distance : 6 meters
- Remote control : Infrared
- Battery : 2 x 1,5V AAA
Product Usage Instructions
1. Infrared Receiver
To use the remote control, point it towards the infrared receiver on the device you want to control.
2. Quality Control
Our products undergo rigorous quality control measures to ensure
they meet high standards of performance and reliability.
3. Remote Control Operation
Follow the instructions provided with the remote control for
specific guidance on how to operate it effectively.
4. Maintenance
Keep the remote control clean and handle it with care to prolong its lifespan.
FAQs
Q: How do I change the batteries in the remote control?
A: To change the batteries, locate the battery compartment on the back of the remote control, remove the old batteries, and insert new ones following the correct polarity.
Q: What should I do if the remote control is not working?
A: Check if the batteries are inserted correctly and have enough power. Ensure there are no obstructions blocking the line of sight between the remote control and the device’s infrared receiver.
Q: Can the remote control be programmed for multiple devices?
A: Refer to the user manual or manufacturer’s instructions to see if your remote control supports programming for multiple devices. Follow the provided steps for programming if available.
ATTENTION : Schuller recommends to use included special screws when installing this pendant lamp.
CAUTION
- When preparing this lamp for installation, extreme care must be taken with the methacrylate. Only place the methacrylate on soft, clean surfaces. Do not leave any object (canopy) or tool on top of it.
GOLD LEAF APPLICATION IS ENTIRELY HANDCRAFT WORK, SLIGHT IMPERFECTIONS ON THE DECORATED SURFACE MAY BE ACCEPTED BY OUR QUALITY CONTROL
- You may use the following QR code to view the complete technical data sheet of the product:
- If you have any technical questions, please do not hesitate to contact our technical Department. We are at your disposal in our email: export@schuller.es
REMOTE CONTROL INSTRUCTIONS
- ON / OFF
- Change color temperature (soft-warm-cool)
- Night lamp (soft 5%)
- Turn off the light after 1 minute.
- Increase color temperature.
- Reduce color temperature
- Dim up the brightness
- Dim down the brightness.
Note : The lamp turned off through the remote control remains in standby mode. It will be completely off if power is cut off through the wall switch.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>