TIMEX EXPEDITION World Time Digital Watch User Guide

: August 21, 2024
: Timex

Table of Contents

TIMEX EXPEDITION World Time Digital Watch
Product Information
Product Usage Instructions
Frequently Asked Questions
FUNCTIONS
BASIC OPERATION
WORLD TIME TABLE
CHRONOGRAPH
COUNTOWN TIMER
BATTERY
WARRANTY
Documents / Resources

TIMEX EXPEDITION World Time Digital Watch

Product Information

Specifications

Model Number: 03W-096000
Features: World Time, Chronograph, Countdown Timer
Functions: Time/Date setting, Stopwatch, Timer setting

Product Usage Instructions

Setting Time, Date, and World Time City

From Time of Day mode, press and hold SET. The World Time City Code will flash.
Press ADJ to advance the setting or INDIGLO to reverse the setting. Hold ADJ to increment quickly.
Press MODE to select DST (Daylight Saving Time) for that City Code.

Using Chronograph

Press MODE until SP appears to start the stopwatch.
Press SET to record Split times while the stopwatch is running.
Press SET to release the display and show the current running stopwatch time.
Press ADJ to pause timing. Press ADJ to resume or SET to reset the stopwatch.

Countdown Timer

Press MODE until TMR appears.
To set the Timer, press and hold SET. Adjust the Hours and Minutes using ADJ.
Press MODE to set the Minutes display. Use ADJ to adjust the setting.

World Time

View the local time in any of the other 35 time zones tracked by the watch. Refer to the World Time Table for City Codes based on GMT difference.

Frequently Asked Questions

Q: How do I register my product?

A: Visit the respective Timex registration page based on your location provided in the user manual and follow the instructions.

Q: What if my model does not have all the features mentioned in the manual?

A: Your specific model may vary in features from those described in the manual; refer to your model’s specifications for accurate details.

WARNING

INGESTION HAZARD: This product contains a button cell or coin battery.
DEATH or serious injury can occur if ingested.
A swallowed button cell or coin battery can cause Internal Chemical Burns in as little as 2 hours.
KEEP new and used batteries OUT OF REACH of CHILDREN
Seek immediate medical attention if a battery is suspected to be swallowed or inserted inside any part of the body.
Remove and immediately recycle or dispose of used batteries according to local regulations and keep away from children. Do NOT dispose of batteries in household trash or incinerate.
Even used batteries may cause severe injury or death.
Call a local poison control center for treatment information.
Battery type: lithium metal, CR2016.
Nominal battery voltage: 3.0 V
Non-rechargeable batteries are not to be recharged.
Do not force discharge, recharge, disassemble, heat above 158°F (70ºC) or incinerate. Doing so may result in injury due to venting, leakage or explosion resulting in chemical burns.
Ensure the batteries are installed correctly according to polarity (+ and -).
Do not mix old and new batteries, different brands or types of batteries, such as alkaline, carbon zinc, or rechargeable batteries.
Remove and immediately recycle or dispose of batteries from equipment not used for an extended period of time according to local regulations.
Always completely secure the battery compartment. If the battery compartment does not close securely, stop using the product, remove the batteries, and keep them away from children.
Please read instructions carefully to understand how to operate your Timex® watch.
Your model may not have all of the features described in this booklet.

FUNCTIONS

Real-time calendar clock, Chronograph with Split, Countdown Timer, World
Time log, Two Daily Alarms, and INDIGLO® night-light.

BASIC OPERATION

TIME/DATE/WORLD TIME CITY

To set time, date, and world time city

From Time of Day mode, press and hold SET. The world time City Code can be seen flashing.
Press ADJ to advance the setting or press INDIGLO to reverse the setting.
- Press and hold to increment quickly.
- Note: Please refer to the World Time Table for available City Codes based on your GMT difference.
Press MODE to select DST (Daylight Saving Time) for that City Code. Press ADJ to select/deselect DST. The “DST” symbol will light at the bottom of the display to confirm daylight saving time is “on”.
- Note: This option will only be offered for cities that observe DST. Please refer to the World Time Table for those cities.
Press MODE to set Seconds. Press ADJ or INDIGLO to set Seconds to zero adding one minute if seconds are “30” or greater.
Press MODE to set Hours, as indicated by its flashing. Press ADJ to advance the setting or press INDIGLO to reverse the setting. Press and hold to increment quickly.
Press MODE to set Minutes, as indicated by its flashing. Press ADJ to advance the setting or press INDIGLO to reverse the setting. Press and hold to increment quickly.
Press MODE to set the Year, as indicated by its flashing 2 digits. Press ADJ to advance the setting or press INDIGLO to reverse the setting. Press and hold to increment quickly.
Press MODE to set the Month number, as indicated by its flashing. Press ADJ to advance the setting or press INDIGLO to reverse the setting. Press and hold to increment quickly.
Press MODE to set the Date, as indicated by its flashing. Press ADJ to advance the setting or press INDIGLO to reverse the setting. Press and hold to increment quickly.
- Note: The Day of the Week is set automatically using the Year, Month and Date.
Press MODE to set the Time Format, as indicated by its flashing (12HR or 24HR). Press ADJ or INDIGLO to toggle the setting.
Press SET to exit Time Set.
Note: 12-Hour time has no indicator in the morning and a “PM” indicator after Noon.

WORLD TIME TABLE

CHRONOGRAPH

Use this function for timing events.

Press MODE until “SP” appears.
Press ADJ to start timing.
With the stopwatch running, press SET to record a Split time. The stopwatch will continue timing in the background.
Press SET to release the display and show the current running stopwatch time.
Press SET to record another Split time.
Press ADJ to pause the timing.
Either press ADJ to resume timing, or press SET to reset the stopwatch to zero.
- Note: If the stopwatch was paused when the display was showing a Split time, the first press of SET will show the final recorded time, and the second press will reset the stopwatch to zero.

COUNTOWN TIMER

Use this function for timing events or tasks that have a defined duration.

Press MODE until “TMR” appears.
To Set the Timer, press and hold SET. The Hour digit flashes.
Press ADJ to advance the setting or press INDIGLO to reverse the setting. Press and hold to increment quickly.
Press MODE to set the Minutes as indicated by its flashing. Press ADJ to advance the setting or press INDIGLO to reverse the setting. Press and hold to increment quickly.
Press MODE to set the Seconds as indicated by its flashing. Press ADJ to advance the setting or press INDIGLO to reverse the setting. Press and hold to increment quickly.
Press SET to exit Countdown Timer Set.
To Use the Timer, press ADJ to start timing.
With the timer running, press ADJ to pause the timer.
With the timer paused, press ADJ to re-start it or press SET to reset the timer to its originally set duration.
When the alert sounds, press ANY button to silence it, or it will stop beeping in about 10 seconds.
If no button is pressed, the timer will start counting UP and continue running for up to 24 hours. Press ADJ to pause the timer, and press SET to reset the timer to its originally set duration.
- Note: When there are 30 seconds left, a single beep will sound. With 10 seconds left, the watch will beep every second as it counts down.

WORLD TIME

View the local time in any of the other 35 time zones tracked by the watch.
Note: Refer to the World Time Table below for available City Codes based on your GMT difference.

Press MODE until City Code appears. The local time will be displayed on the Top line and the corresponding world time will appear large on the Middle line.
Press ADJ to advance through the list of World Time zones. Press and hold to increment quickly.
To keep the local times accurate, you must have DST (Daylight Saving Time) correctly activated/deactivated. Press and hold SET to toggle the DST setting for each city code.

WORLD TIME TABLE

ALARM 1

To set the first of 2 Daily alarms, to turn on/off Alarm 1, or to turn on/off the hourly chime.

To Set the Alarm

Press MODE until “AL1” (Alarm 1) appears.
- Note: The current Time appears in the Top line of the display, and the Alarm set time will be presented in the same format (12HR or 24HR) as the Time mode.
Press and hold SET. The Hour digit flashes and the Alarm lights.
Press ADJ to advance the setting or press INDIGLO to reverse the setting.
- Press and hold to increment quickly.
Press MODE to set the Minutes as indicated by its flashing. Press ADJ to advance the setting or press INDIGLO to reverse the setting. Press and hold to increment quickly.
Press SET to exit Alarm 1 Set.
When the Alarm sounds, press any button to turn off the alert, or it will continue for 20 seconds.

To Turn the Alarm 1 On/Off or to turn the Hourly Chime On/Off

Press MODE until “AL1” (Alarm 1) appears.
- Note: The current Time appears in the Top line of the display.
Press ADJ repeatedly to turn:
- a. the Alarm ( ) On,
- b. the Hourly Chime ( ) On
- c. the Alarm ( ) Off, or
- d. the Hourly Chime ( ) Off
Press MODE to exit Alarm 1 mode.

ALARM 2

To set the second of 2 Daily alarms, or to turn on/off Alarm 2.

Press MODE until “AL2” (Alarm 2) appears.
- Note: The current Time appears in the Top line of the display, and the Alarm set time will be presented in the same format (12HR or 24HR) as the Time mode.
Press and hold SET. The Hour digit flashes and the Alarm ( ) lights.
Press ADJ to advance the setting or press INDIGLO to reverse the setting. Press and hold to increment quickly.
Press MODE to set the Minutes as indicated by its flashing. Press ADJ to advance the setting or press INDIGLO to reverse the setting. Press and hold to increment quickly.
Press SET to exit Alarm 2 Set.
When the Alarm sounds, press any button to turn off the alert, or it will continue for 20 seconds.
- Note: The Alarm set time will be presented in the same format (12HR or 24HR) as the Time mode.

To Turn the Alarm 2 On/Off

Press MODE until “AL2” (Alarm 2) appears.
- Note: The current Time appears in the Top line of the display.
Press ADJ repeatedly to turn:
- a. the Alarm ( ) On, or
- b. the Alarm ( ) Off

INDIGLO® NIGHT-LIGHT

Press INDIGLO® button to illuminate watch display for 2 – 3 seconds.
Electroluminescent technology used in the INDIGLO® night-light illuminates entire watch face at night and in low light conditions. Any button pressed while INDIGLO® night-light is on keeps it on.

WATER AND SHOCK RESISTANCE

If your watch is water-resistant, meter marking or ( ) is indicated

pounds per square inch absolute

WARNING: TO MAINTAIN WATER-RESISTANCE, DO NOT PRESS ANY BUTTONS UNDER WATER.

Watch is water-resistant only as long as lens, push buttons and case remain intact.
Watch is not a diver watch and should not be used for diving.
Rinse watch with fresh water after exposure to salt water.
Shock-resistance will be indicated on watch face or caseback. Watches are designed to pass ISO test for shock-resistance. However, care should be taken to avoid damaging crystal/lens.

BATTERY

The watch button cell or coin battery is not intended to be replaced by a consumer. Only a jeweler or other professional is to replace the battery.

WARRANTY

TIMEX INTERNATIONAL WARRANTY

http://www.timex.com/productWarranty.html

©2024 Timex Group USA, Inc. TIMEX, EXPEDITION and INDIGLO are trademarks of Timex Group B.V. and its subsidiaries.
03W-096000-03
Register your product at https://www.timex.com/product- registration.html

Documents / Resources

| TIMEX EXPEDITION World Time Digital Watch [pdf] User Guide
03W-096000-03, EXPEDITION World Time Digital Watch, EXPEDITION, World Time Digital Watch, Time Digital Watch, Digital Watch, Watch
---|---