MobileDemand T1175 High Performing Rugged Industrial xTablet User Manual
- August 24, 2024
- MobileDemand
Table of Contents
MobileDemand T1175 High Performing Rugged Industrial xTablet
PRODUCT INFORMATION
Specifications
- Model: xTablet T1175
- Ports: USB 2.0 Type-C PD-IN port, Dock connector, USB 3.1 Gen 1 port 1, USB 3.1 Gen 1 port 2, Headphones, RJ-45 connector
- Features: Barcode scanner, Front and Rear camera, Speaker, Kensington lock
Product Overview
- Type-C/Power delivery adapter and AC power cord
- Hand strap
- Briefcase handle
- Stylus (optional)
- Stylus holder (optional)
- Quick Guide
- The product features various components including Volume control, a Power button, Status LEDs, a Barcode scanner, a Front and Rear camera, a Speaker, USB ports, a Headphone jack, an RJ-45 connector, a Kensington lock, Function keys for the scanner and programmable functions, and a Battery latch.
Power Supply
- Connect the device to an AC power source using the provided AC/DC adapter before turning it on for the first time.
- Avoid letting the device shut down due to low battery as it may lead to system failure.
Dos and Don’ts for AC/DC Adapter
- Plug in the AC/DC adapter to maintain a sufficient power supply.
FAQ
Q: How do I access the complete user manual for xTablet T1175?
A: Users can download the user manual via the QR code or by visiting the website www.ruggedtabletpc.com/xTablet-T1175. Click on Downloads, then Documentation, and select the xTablet T1175 User Guide link.
Copyright and Trademarks Notice
All marks and names mentioned may be trademarks of their respective owners. No warranty as to accuracy or completeness is expressed or implied. We reserve the right to make changes to this document without prior notice.
Revision History
- Version: 1.0
- Date: 10, 2023
FCC Statement
FCC-B Radio Frequency Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and radiates radio frequency energy, and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio TV technician for help.
NOTE
- The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
- Shield interface cables and AC power cord, if any, must be used to comply with the emission limits.
FCC Conditions
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
FCC/IC RF Radiation Exposure and SAR Statements
This equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This device was tested for typical lap-held
operations with the device contacted directly to the human body to the back
side of the notebook computer. To maintain compliance with FCC RF exposure
compliance requirements, avoid direct contact with the transmitting antenna
during transmission of SAR information 1.318W/Kg@1g (body).
Prohibit operating transmitters in the 5.925-7.125 GHz frequency band to
control or communicate with unmanned aerial vehicle systems.
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions:
- this device may not cause interference
- this device must accept any interference, including interference that may cause undesired operation of the device.
This equipment complies with Industry Canada radiation exposure limits set
forth for an uncontrolled environment. The end user must follow the specific
operating instructions to satisfy RF exposure compliance.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter. The device is designed to meet the requirements
for exposure to radio waves established by Industry Canada.
These requirements set a SAR limit of 1.6 W/kg averaged over one gram of
tissue. The highest SAR value reported under this standard during product
certification for use at the body is 1.318 W/kg.
Safety Instructions
Introduction
- Congratulations on the purchase of MobileDemand’s rugged xTablet® T1175. Designed and tested to meet our exacting standards ensures dependability and customer satisfaction.
- Refer to this manual to guide you through the basic functions and features.
Unpacking
- Unpack the shipping carton and check all items carefully. If any item is damaged or missing contact MobileDemand.
- Please keep the box and packing materials in the event you need to ship the unit. The package should contain the following items:
- xTablet T1175
- Type-C/Power Delivery adapter and AC power cord
- Hand strap
- Briefcase handle
- Stylus (optional)
- Stylus holder (optional)
- Quick Guide
Product Overview
Front View
1. Front Camera|
---|---
2. Internal Microphone|
3. Status LEDS|
Power
• Green OFF: Power off /Hibernation
• Green ON: Power on
• Breathing Green: Standby /Sleep
| Battery Status
• OFF: Battery is not charging
• Green ON: Battery is fully charged
• Orange ON: Battery is charging while the system is ON & OFF
• Blinking Orange (4Hz): Battery error.
• Blinking Orange (1Hz): Battery capacity is lower than 7%
4. Speaker Supports high-quality sound.|
Top View
1. Barcode Scanner (optional)
2. Power Button
► Before powering on the tablet PC for the very first time, you must connect it with AC power.
► Press and hold the power button for 2 seconds to power on the tablet PC.
► Press and hold the power button for 8 seconds can shut down the tablet PC.
3. Volume
Bottom View
- Dock Connector Connect with an external Docking station to increase more I/O functions.
Right Side View
- USB 2.0 Type-C PD-IN Port
- The USB 2.0 Type-C PD-IN port allows you to connect USB-interface peripheral devices, such as the mouse, keyboard, modem, portable hard disk module, printer, etc and optionally supports PowerDelivery function with variable up to 100W power input and maximum 5V/3A or 5V/1.5A power output when AC power is connected.
Left Side View
1. USB 3.1 Gen 2 Port (with DisplayPort function)
USB 3.1 Gen 2, the SuperSpeed USB 10Gbps, supports high-speed data transfer for connected devices, such as storage devices, hard drives, or video cameras.
The DisplayPort function supports external display connection.
2. USB 3.1 Gen 2 Port
USB 3.1 Gen 2, the SuperSpeed USB 10Gbps, supports high-speed data transfer for connected devices, such as storage devices, hard drives, or video cameras.
3. Headphone Jack
Used for connecting the speakers or headphones.
4. RJ-45 Connector
The Ethernet connector, with optionally supported transmitting rate of 10/100/1000 megabits per second, is used to connect a LAN cable for a network connection.
5. Kensington Lock
This tablet provides a Kensington lock hole, which allows users to secure the tablet in place.
Back View
1. F1 Button – Barcode Scanner Trigger
2. Battery Latch
This built-in rear camera can be used for photos, video recording, conferencing, and other interactive applications.
3. Micro SD Card Slot
To access remove the battery.
4. Nano Sim Card Slot
To access remove the battery.
5. F2 Button – User Defined
6. Rear Camera
Specifications
The specifications listed here are for reference only and may change without notice.
DIMENSIONS| 11.54 in. L x 7.56 in. H x .67 in. D 293mm L x 192mm H x 17mm D
Weight – 1350g | 2.97lbs
---|---
DISPLAY| 10.1” sunlight viewable
WUXGA 1920W x 1200H IPS; 800 NITS
10-point multi-touch capacitive screen. Digitizer support MPP2.0/EETI
CPU| Intel® 13th Gen i5-1335U Optional i7 upgrade
MEMORY| 16GB
STORAGE| 256GB Standard, 512Gb/1TB Optional PCIe SSD
O/S| Windows 11 Pro
Optional: Windows 10 Pro Downgrade; LTSC
RUGGEDIZED| MIL-STD-810G (5’ drop)
Sealing| IP65 (dust and water)
Screen Protector| Oleophobic, scratch-resistant glass
Operating Temp| 14°F to +122°F / -10°C to +50°C
Storage Temp| -4°F to +140°F / -20°C to +60°C)
Operating Humidity| 5% to 95% RH, non-condensing
CAMERA| Front – 2MP FF – Windows Hello support Rear – 8MP AF with flash
AUDIO| High Definition Audio
SCANNER| Optional High performance
Honeywell N6703 2D barcode scanner Honeywell N6803 2D barcode scanner
I/O PORTS| USB 3.1 Gen1 (Type A ) USB 3.1 Gen1 (Type C )
USB 2 Gen1 (Type C ) MicroSD Reader (micro) SIM card slot (nano) Headphone (3.5mm) LAN Port 19 pin pogo
---|---
BUTTONS| Power Button Vol Up Button Vol Down Button Reset Function (Fn) Keys –
x2
SENSORS| Accelerometer Gyroscope
E-Compass
Proximity Ambient Light
BATTERY SYSTEM| 7.6V, 8,340 mAH, 64Wh
Up to 10 battery life1 Hot-swappable
WIRELESS/NETWORK
WLAN| Intel AX211 802.11 a/b/g/n/ac/ax Wi-Fi 6E
Bluetooth| 5.3
GPS| uBlox-M9N
LTE| Optional 4G
RFID/NFC| Optional 13.56MHz/125kHz
SECURITY
TPM| 2.0
AGENCY APPR| FCC, CE, IC, WEEE, RoHS
Getting Started
Power Supply
- This section provides basic safety precautions when using an AC/DC adapter and battery.
AC/DC Adapter
- Ensure the xTablet T1175 is connected to an AC power source via the AC adapter before turning it on for the first time. If the xTablet automatically shuts down due to low battery power, it is likely to cause system failure.
- Below are some Dos and Don’ts for an AC/DC adapter.
Dos
- Use the adapter that shipped with xTablet T1175 only.
- Always be aware of heat coming from the AC/DC adapter while in use.
- Unplug the AC power cord before disassembling the tablet.
Don’ts
- Never cover an adapter that is in use as it can generate heat.
- Have the AC power cord plugged in after powering off the system when the tablet is going to be left unused for a longer time.
Plug the AC/DC Adapter
- Plug the DC end into the USB-C Power Delivery (PD) port of the xTablet T1175 .
- Plug the AC/DC adapter into the power outlet.
- When removing, follow the steps in reverse order.
- (NOTE: The interchangeable plug may vary depending on countries or regions.)
Battery
- This Tablet is equipped with a built-in Lithium-ion Polymer battery pack.
- The rechargeable Lithium-ion Polymer battery pack is an internal power source.
- The battery pack may be damaged if users attempt to disassemble it. The limited warranty will be voided if the battery pack is disassembled by non-authorized technicians.
- Please follow your local laws and regulations to recycle the Tablet and the built-in battery pack.
Conserving Battery Power
- Efficient battery power is critical to maintain normal operation. If battery power is not managed well, the saved data and customized settings may be lost.
- To optimize battery life and avoid sudden power loss, read the tips below:
- Suspend system operation if the system will be idle for some time.
- Disable unnecessary settings or remove idle peripherals.
- Connect an AC/DC adapter to the system whenever possible.
Charging the Battery Pack
- The built-in battery pack can be recharged when the Tablet is connected to the AC power. Please pay attention to the following tips before recharging the battery:
- You can use the system, suspend system operation, or shut down and turn off the system without interrupting the charging process.
- The built-in battery pack uses Lithium-ion Polymer battery cells that have no “memory effect.” It is unnecessary to discharge the battery before recharging.
- However, to optimize the life of a battery, we suggest that consuming the battery power completely once a month is necessary.
- The actual charging time will be determined by the applications in use.
- Contact our sales team today
- sales@mobiledemand.com
- 319.363.4121
- 1501 Boyson Square Drive
- Suite 101
- Hiawatha, Iowa 52233
- RuggedTabletPC.com
- ©2023 MobileDemand, LC
- All trademarks are the property of their respective owners.
- VERSION 12.11.23
Documents / Resources
|
MobileDemand T1175 High Performing Rugged Industrial
xTablet
[pdf] User Manual
T1175, T1175 High Performing Rugged Industrial xTablet, High Performing Rugged
Industrial xTablet, Rugged Industrial xTablet, Industrial xTablet, xTablet
---|---