TILTA WLC-T05-PH Force N II Power Handle Instruction Manual
- June 1, 2024
- TILTA
Table of Contents
WLC-T05-PH Force N II Power Handle
Instruction Manual
NUGLEUS NANO I POWER HANDLE
[DISCLAIMER]
Thank you for purchasing a TILTA product.
Before using this product, please carefully read this document to ensure that
the product has been set up correctly. The final interpretation of this
document and all related documents for this product belongs to TILTA. For
updates, please visit the official website at
www.tilta.com for the latest product information.
TILTA reserves the right to modify any information in this manual at any time
without prior notice and without assuming any responsibility.
By using this product, you are deemed to have carefully read the disclaimer
and warnings, understood, agreed, and accepted all the terms and content of
this statement. You promise to take full responsibility for the use of this
product and any consequences that may arise. You commit to using this product
only for legitimate purposes and agree to this term as well as any related
regulations, policies, and guidelines set by TILTA.
TILTA is not responsible for any damages, injuries, or legal liabilities
caused directly or indirectly by the use of this product. Users should follow
all safety guidelines mentioned in this document, including but not limited to
those mentioned. Despite the above provisions, consumer rights are still
protected by local laws and regulations and are not affected by this
disclaimer.
TILTA is a trademark of Shenzhen TILTA Technology Co., Ltd. and its affiliated
companies. Product names, brands, and other trademarks appearing in this
document are trademarks or registered trademarks of their respective
companies.
[PACKING LIST]
[INTRODUCING NUCLEUS NANO II POWER HANDLE] (Battery Not Included)
[PRO DU CT SPEC I Fl CATIONS]
(Support Multiple Power Outputs)
- Dimensions: 73x49x138mm
- Weight 1929
- Materials: Aluminum Alloy+ Silicone
- Color: Black
[POWER SUPPLY]
(I) Power the Nucleus Nano II Hand Wheel via the contact pins on the power
handle. 
(II) The power handle has a DC 8V port and can be used with a dummy battery or
a power cable. The two USB-C ports support PD protocols, and can provide power
for smartphones and Nucleus Nano II motors. It can also charge the NP-F
battery.
(Ill) Use with a Tilta Rotatable Phone Mounting Bracket (TA-PMB2) or Tilting
Adjustable Cold Shoe Accessory Mounting Bracket (TA-AMB) and a smartphone or
an on-board monitor to assemble a follow focus monitoring system. See below:
Mount the Tilta Accessory Mounting Bracket (1/4″-20 with Locating Pins) (TA-
AMB3-B) and an on-board monitor onto the power handle.
Connect the DC port on the power handle and the monitor to a DC power cable.
The power handle can provide power for multiple outputs simultaneously.
Mount the Tilta Rotatable Phone Mounting Bracket (TA-PMB2-B) and smartphone onto the power handle. Connect the USB-C port on the power handle and to the smartphone with a PD power cable. The power handle can provide power for multiple outputs simultaneously.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>