TILTA TA-RF-LPL Adapter Ring Support Instruction Manual
- June 2, 2024
- TILTA
Table of Contents
TILTA TA-RF-LPL Adapter Ring Support
RED KOMODO
Specifications
| Component | Description |
|---|---|
| M4*8mm Screw | For securing the LPL adapter |
| M4125mm Screw | For mounting to the camera cage |
| 1/4″10.5*5mm Screw | For mounting to the camera cage |
Installation Diagram
The diagram shows a circular LPL mount adapter support with two attachment points. It is designed to hold an LPL adapter securely in place on the RED KOMODO-X camera. There are two types of screws that attach the support to the camera cage.
Assembly Instructions
- Install the LPL mount adapter support to the 1/4″-20 thread on the camera cage.
- Mount the LPL mount adapter to the M4 threads on the front of the Tilta camera cage for Red Komodo-X. Tighten the tie down screws.
Additional Component
TA-RF-LPL (Optional)
After installing the LPL mount adapter support, mount 3 the Tilting Canon RF Mount to ARRI LPL Mount Adapter (TA-RF-LPL) to the camera. See diagram reference number 3 4.
FAQ
What is the purpose of the M4*8mm screw?
The M4 8mm screw is used for securing the LPL adapter to the support.
How do you attach the LPL mount adapter support to the RED KOMODO-X?
Is the TA-RF-LPL component necessary for installation?
The TA-RF-LPL component is optional and is used for mounting a Tilting Canon RF Mount to ARRI LPL Mount Adapter to the camera.
Where do you tighten the tie down screws?
Tie down screws should be tightened on the front of the Tilta camera cage for Red Komodo-X after mounting the LPL adapter.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>