STONO 2024 Outdoor Kitchens User Guide
- August 16, 2024
- STONO
Table of Contents
2024 Outdoor Kitchens
“`html
Specifications:
- Leveling Legs: 4
- Storm Tie-down Straps: 4
Product Usage Instructions:
Shell Construction:
Your outdoor kitchen may arrive pre-assembled or in multiple
sections. Follow these steps:
-
Connect sections by sliding the cleat system into corresponding
slots. -
Use a rubber mallet to ensure cleats are fully seated.
-
Fasten each support and panel together using provided
screws.
Leveling System:
Adjust leveling kit with the allen wrench to achieve level. Use
leveling feet at your discretion.
Component Installation:
Stono components are pre-installed. Follow manufacturer
instructions for 3rd party components.
Countertop Installation:
Lower the countertop into place, ensuring it covers the top of
the kitchen shell and overlaps on all sides. Use glue or silicone
to secure.
Grill Installation:
Trim the provided gasket as needed for your grill application.
Install the grill into the countertop following the manufacturer’s
instructions.
Completion:
Install any remaining components and enjoy your outdoor
kitchen!
FAQ:
Q: Can I disassemble the kitchen after installation?
A: Using glue or silicone during installation may make it
difficult to disassemble the kitchen in the future to replace
panels.
“`
Outdoor Kitchens – Installation & User Guide
Installer please leave this with homeowner
Thank You!
Thank you for purchasing a Stono Outdoor Kitchen! We are confident this
quality product will last you for years to come. If you need further help or
additional information regarding installation, please do not hesitate to reach
out to us!
Included Parts & Tools
The following parts and tools are included with your outdoor kitchen.
Leveling Legs: 4 Storm Tie-down Straps: 4
Photos of Completed Projects
We would love to see pictures of your finished and installed project! Please
send images to support@stonooutdoor.com. High quality images will likely be
featured on our social media or website!
Outdoor Kitchens & Islands
Shell Construction
Your kitchen should arrive pre-assembled, however large kitchens may arrive in
multiple sections. If your kitchen contains multiple sections please see the
following instructions. Otherwise, skip to page 4.
The primary fastening mechanism is a slot and cleat system that is laser cut
in the supports and panels. The vertical supports will have slots cut in them
that correspond with cleats that are cut in the front and back panels.
Connect your kitchen sections by sliding the cleat system of each section into
the corresponding slots of the adjoining section. Using a rubber mallet,
ensure cleats are fully seated.
Legend
Vertical Support: V1, V2, Etc Back Panel: B1, B2, Etc Front Panel: F1, F2, Etc
Shell Construction Continued
Although your kitchen design and layout may vary, always follow the sequence
of numbers for each adjoining section. Repeat this process until all of the
Vertical Supports and Panels are connected.
Using the provided screws, fasten each Support and Panel together in the
corners of each section.
Leveling System
Each unit will come with an adjustable leveling kit. If desired, adjust with
the included allen wrench as needed to achieve level. Using the leveling feet
will be at the discretion of the installer, we do not require that the feet be
used to elevate the product. If desired, insert included storm tie-down straps
over leveling legs, and secure in place with the appropriate fasteners (not
included).
Component Installation
Stono Components will come pre-installed. If you purchased 3rd party
Components, please follow the manufacturer instructions for installation.
Typically, the component will be fastened to the formed return in the opening
of the metal front panel of the kitchen shell.
Countertop Installation
Lower the countertop into place on top of the kitchen. The countertop should
cover the top of the kitchen shell, and overlap downwards several inches on
all sides..Glue or silicone may be used to secure the countertop, but will
make it very difficult to remove in the future to replace panels or
disassemble the kitchen.
Grill Installation
Your countertop will be pre-cut to the specifications provided for your
specific grill. Please trim the provided Gasket as needed for your
application. Following any specific instruction provided by the manufacturer,
install your Grill into the countertop.
Completion
Install any remaining components, and enjoy!
Operation & Maintenance
· Excessive heat can cause damage to the finish. A very hot wood or gas fire,
or hot coals
and embers coming in contact with a finished surface can cause discoloration
or more serious damage. This type of damage, caused by overheating, is
considered abuse and is not covered under warranty.
· Your kitchen and countertop powdercoat finishes can be cleaned using a damp
cloth
and soap or mild household cleaner, or rubbing alcohol for tougher stains. For
Stainless finishes, please use standard Stainless cleaners and supplies. To
avoid damage to the finish, abrasive cleaning products and cleaners containing
ammonia or other harsh chemicals should be avoided.
Warranty
Your Stono Products are covered by a 5 year limited warranty. For more
information, please visit www.stonooutdoor.com.
This product can expose you to chemicals including Carbon Black, which is
known to
the state of California to cause Cancer. For more information go to
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>