DEFENDER 4K Guard Pro Camera Instructions

DEFENDER 4K Guard Pro Camera

Specifications :

• Maximum SD Card Size: 256GB
• Camera Power Supply: Not waterproof
• Extension Cable Length: 25ft.

Product Usage Instructions

Step 1: Connect to Wi-Fi and Pair Your Camera

1. Ensure your phone is connected to a 2.4 GHz Wi-Fi network.
2. Tap + to add your camera, then tap Scan QR code.
3. Turn on Bluetooth on your phone and tap Next.
4. If unable to scan QR code, tap Add Manually.
5. Select the 2.4 Wi-Fi network you want to connect your camera to.
6. Enter your Wi-Fi network password and tap Next.
7. Name your device and tap Done.

Step 2: Insert A Micro SD Card

1. Unscrew the Philips screws to remove the lower cover.
2. To swap out the Micro SD card, gently press on it until it pops out.
3. Insert the new Micro SD card until you hear a click sound.

Step 3: Position and Install Your Camera

1. Test Wi-Fi strength and video feed using the app before mounting the camera.
2. Plug the camera in the desired area for monitoring.
3. Ensure a clear view by adjusting the camera angle and position.
4. Mount the camera at a suitable height near a power outlet.

Using the App
The Defender Guard App allows remote viewing of live video, playback of recorded footage, saving and sharing recordings, and more. Scan the QR Code to download the app.\

FAQ:

• Q: How do I check my network signal strength using the app?
  A: To check network signal strength, go to Tools > Wi-Fi Detection Tool

  Wi-Fi Detection in the app.

SETTING UP YOUR CAMERA

Step 1: Connect to Wi-Fi and Pair Your Camera

IMPORTANT : Before pairing, ensure your phone is connected to a 2.4 GHz Wi-Fi network

1. Tap + to add your camera, then tap Scan QR code.

2. Ensure Bluetooth is turned on your phone and tap Next.
   Note: If your mobile device cannot scan the QR code, tap “Add Manually”

3. Wait for the camera LED to flash green slowly. Tap “Next” to proceed.

4. To ensure connection, please keep your phone, device and router close to each other. 

5. Select the 2.4 Wi-Fi network you want to connect your camera to. Tap arrow if 2.4 GHz WIFI network is not connected. Select your Wi-Fi Network password then tap “Next”.

6. Please wait while the device connects to the server.

7. Name your device. We recommend naming your camera if you are connecting more than one camera. Tap “Done”. Your device has now been added successfully.

Note : Please repeat these steps for each additional camera you want to connect.

Step 2: Insert A Micro Sd Card
Recordings can be locally stored on a Micro SD card, to insert or swap out your Micro SD card please follow the steps below. The maximum size Micro SD card is 256GB.

1. Remove the lower cover by unscrewing the Philips screws to access the SD card.
2. If swapping out a current Micro SD card, gently press on the card, it will pop out.
3. When inserting your Micro SD push it in until you hear a click sound.

Step 3: Position and Install Your Camera

• IMPORTANT: Before mounting your camera, use the app to test your Wi-Fi strength and video feed. Plug the camera in the area you’ll be monitoring and view your footage to ensure you have a clear, uninterrupted view.

• To check your network signal strength, tap >  Tools > Wi-Fi Detection Tool >  Wi-Fi Detection

• Note : Cement walls, exterior finishes, and thick insulation can significantly affect Wi-Fi signal strength.

• Using the recommended tools, install your camera in a preferred place, at a height where you can clearly see faces. Make sure there is a nearby power outlet.

• IMPORTANT :
  The Camera Power Supply is NOT waterproof.

• TIP : Your Guard Pro Camera comes with a 25ft. extension cable, giving you 35ft. to mount your camera from the power outlet.

• Loosen the adjustable joints and position the camera to ensure the best possible camera angle. Tighten the adjustable joints when finished.

USING THE APP

The Defender Guard App allows you to remotely view live video or playback recorded footage, save and share recordings, share App access and more. Scan the QR Code!

FREQUENTLY ASKED QUESTIONS

• HOW MANY CAMERAS CAN I CONNECT TO THE DEFENDER GUARD APP?
  You can connect a total of 16 cameras to the Defender Guard App and view up to 4 cameras at once. We recommend no more than 6 Guard/Guard Pro/Guard Pro PTZ/ 4K Guard Pro cameras be connected in the same home/building to avoid interference issues.

• CAN I ALLOW OTHER PEOPLE TO VIEW MY CAMERA(S) REMOTELY?
  You may share the Defender Guard App access with up to 5 additional users. Each user will need to download the Defender Guard App and create their own account before sharing access. IS 4K

• GUARD PRO COMPATIBLE WITH ANY DEFENDER CAMERA SYSTEM?
  4K Guard Pro is only compatible with the Defender Guard, Guard Pro, Guard Pro PTZ & Guard Pro Dual-lens camera. It can not be used with any other Defender Camera system. Guard/Guard  Pro/Guard Pro PTZ/Guard Pro Dual-Lens cameras use the Defender Guard app.

• CAN I VIEW MY LIVE OR RECORDED FOOTAGE FROM A WEB BROWSER?
  We do not offer web viewing. You can view the footage from the free Defender Guard app with compatible IOS/Android smart phones/tablets. Alternatively, you may export the footage from the SD card onto a personal computer using a compatible SD card reader.

References

• Extended Warranties
• Activate my Warranty

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>