TexHoo QN10-SE Nuc Box Mini PC Instruction Manual

TexHoo QN10-SE Nuc Box Mini PC Instruction Manual

• Thank you for choosing TexHoo, please read this user manual carefully and save it for future refer-
• The information contained in this document is subject to change without further notice, nothing in this document should be constructed as creating any additional warranty. TexHoo shall not be liablefor technical or editorial errors or omissions that may appear in this document.
•   If there are any problems during the use, please contact us via the email, address in the user manual, we are always here to support you

Technical Speci fications

supports NVME PCIE3.0X2

Network

| Ethernet| RJ45*2 (1G)
WiFi| 802.1/b/ g/n
BlueTooth| BlueTooth 4.0
Power adapter| DC 19V

Packing list

| 1Mini PC+1User Manual+

1Power Adapter+1VESA Stand+ 1HDMI Cable+1Screw Driver

Note: The pictures listed in this manual are for reference only.
Product specifications/ button definitions andappearance are subject to change without further notice.
Note: The pictures listed in this manual are for reference only.

Product specifications/ button definitions andappearance are subject to change without further notice.

Keyhole

4.| CMOS| 8.| DP| 12.| VESA Holes

Connection Steps

1. Connect the monitor with the HDMI cable and set the monitor “Video Input Source” to HDMI/DP.
2. Connect the DC end of the power cord to mini PC and the AC end to power adapter, then plug the power adapter into the
3. Connect the keyboard and mouse (wired and wireless both support). Press the power button to start device

Basic Settings

1、How to enter the BIOS settings screen?
Press the power button and click ESC to enter the BIOS interface. 2、How to enter the startup or boot settings screen?
Press the power button and click F7 to enter the boot selectioninterface

Warranty Policy

1. Within 30 days from the date you receive the item, if the device has functional failure not caused by human damage, after our service center has ver ified, we will provide free replacement or maintenance service according to your (Requires no
   scratches on the appearance and no damage to accessories)

2. Within 1 year from the date of receipt of items, if the device has functional failure not caused by human damage, please contact us via after-sales email, we will provide maintenance
   Warranty service plan: We could first remotely guide you to reset

FCC Compliance Statement

This device complies with Part 15 of the FCC Rules. Oper- ation is subject to the following 2 conditions: (1) this device may not cause harmful interference; (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compli- ance could void the user’s authority to operate the equip- ment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This

FAQ

1. Q: Why does the high-definition cable (HDMI) of WIN10/WIN11 system have no sound output?

A: Right-click small white speaker in the lower right corner of screen to display dialog box，click “playback devices”. Find“Intel audio”or“IDII audio and TV devices” in“ playback devices”,set them as default values.

2. Q: The memory and hard disk capacity display does not

A: The memory display does not match: If you buy 8G and it displays 4G, just reinstall the 64-bit system. Hard drive capacity is measured in megabytes (MB) or gigabytes (GB). In computers, 1GB = 1024MB. Hard drive manufactur- ers usually convert based on 1GB = 1000MB.

1. : Why is there a blue screen when booting?

A: The settings are as follows: Keep clicking the“Delete”key on the keyboard when starting the mini pc, enter the motherboard BI0S (settings

interface), select“Advanced”, and then select“SATA Confoguration”. Then you will see“SATA Mode Selection”set to [AHCI] mode and press F10 to save.

2. Q: Incomplete image display on the

A: Right-click on WIN10 to open Display Settings, and select the best resolution in “Monitor Resolution”.

3. Q: What should I do if there is no display when I turn on the computer? A: First check whether monitor is powered on and then check whether

HDMI or VGA cable is connected normally. If not, please replace the cable.

4. Q: The installation program is incompatible with

A: Right-click the running icon of the software, click“Properties”, and in the properties panel, select “Compatibility”option. Check“Run this program in compatibility mode”, select the system version that can run software, confirm and save.

5. Q: Why does mini pc overheating?

A: Adjust the position to ensure that the air inlet and outlet are not blocked, then check whether the cooling fan is running normally.

Q: How to operate the motherboard hard disk boot option? A: Press F2, F9 , F7 , F11 and F12 according to your needs

Safety Warnings and Precautions

Before using and operating this equipment, please read and observe the following precautions carefully to avoid dangerous or illegal operations.
Use Environment
Do not use the device in dusty and humid places to avoid causing internal circut failures; Do not place this equipment near heating objects such as electric heaters; The working temperature of thisequipment is 0-40 degrees, and the normal working temperature is

Read More About This Manual & Download PDF:

References

• TexHoo Computer Official Website

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>