ESC SOUNDS 2BDQL-ESC Endurance User Manual
- July 26, 2024
- ESC SOUNDS
Table of Contents
ESC SOUNDS 2BDQL-ESC Endurance
Specifications:
- Rechargeable Lithium-ion battery
- Magnetic charging port
- Volume control buttons
- Multifunction button
- Waterproof design
- Bluetooth connectivity
Product Usage Instructions
Charging:
The ESC Sounds Endurance come with a rechargeable Lithium-ion battery. To charge the earbuds:
- Connect one end of the charging cable to the magnetic charging port on the earbuds.
- Connect the other end of the cable to a USB port on your computer or a USB charger.
- A red light will indicate charging, which will turn blue when fully charged.
Power On/Off:
To power on, press and hold the Multifunction Button for three seconds. To power off, repeat the same step until you hear a descending tone.
Volume Control:
Use the volume control buttons to adjust the audio level. Press ‘+’ to increase volume and ‘-‘ to decrease volume.
Skip Track:
To skip tracks, press and hold ‘-‘ for one second to go back and ‘+’ for one second to move forward.
Play/Pause:
Press the Multifunction Button once to pause/play music.
FAQ:
- Q: Can the ESC Sounds Endurance be used for phone calls?
- A: No, these earbuds do not have a microphone and are not suitable for phone calls. Incoming calls can be answered on the connected phone.
- Q: How do I switch between Bluetooth and MP3 (Swim) mode?
- A: Quickly press the Multifunction Button twice to switch modes. Remember, Bluetooth mode does not work underwater.
PRODUCT OVERVIEW
HOW TO WEAR
GETTING STARTED
Charging:
The ESC Sounds Endurance contain a rechargeable Lithium-ion battery, which should be fully charged prior to first use of the product.
To charge up the ESC Sounds Endurance, connect one end of the supplied charging cable to the magnetic charging port and the other end to a USB port on your computer or a USB charger. Whilst charging, the ESC Sounds Endurance will display a constant red light. This light will turn blue when the product is fully charged.
Note: The magnetic charging port and cable have positive and negative poles, which should correctly correspond to each other when charging.
Power On:
Press down the Multifunction Button for three seconds until you hear an ascending tone to indicate the earbud has powered on.
Power Off:
Press down the Multifunction Button for three seconds until you hear a descending tone to indicate the earbud has powered off.
Volume Up and Down
Quickly press and release the “ + “ button to increase the volume and quickly press and release the “ – “ to decrease the volume.
Skip Track:
Press and hold the “ – “ for one second to skip back to the previous track. Press and hold the “ + “ for one second to skip forward to the next track.
Play/Pause
When music is playing, press and quickly release the Multifunction Button once to pause the song and then repeat the action to resume playing.
Phone Call:
So as to be fully waterproof and suitable for swimming, the ESC Sounds Endurance doesn’t contain a microphone and cannot be used for phone calls. If your phone rings while connected to your ESC Sounds Endurance, the call can still be answered directly from your phone.
Decline Call:
To decline an incoming call, press and hold down the Multifunction Button for 1 second.
Pairing to Device:
After powering on, the ESC Sounds Endurance will automatically search for a Bluetooth device to pair with. This is indicated by the light flashing blue and red. Open the Bluetooth list on your device and select ESC Sounds Endurance to connect your device.
Swim (MP3) Mode:
Quickly press and release the Multifunction Button two times to alternate between Bluetooth and MP3 (Swim) mode. Bluetooth cannot transmit through water, so the ESC Sounds Endurance must be in MP3 mode to play underwater. If your phone will be within 20 meters of you while swimming underwater, then you should disconnect from your phone’s Bluetooth before entering MP3 mode. For best underwater listening experience, use the earplugs provided.
Latency Mode:
Quickly press and release the Multifunction Button four times to activate and deactivate Latency Mode.
Downloading Music:
Turn off the ESC Sounds Endurance and connect them to your computer’s USB port, using the charging cable provided. The ESC Sounds Endurance folder will automatically open on your computer, via the USB Drive. Locate and select your MP3 music files on your computer, then simply drag, and drop them into the ESC Sounds Endurance folder. Then eject the ESC Sounds Endurance from your computer, unplug the charging cable, and your MP3 files will be stored on your \
ESC Sounds Endurance. For an instructional video on converting music files to MP3 format, please visit the Instructions page on escsounds.com
BASIC PARAMETERS
- Bluetooth Version : V5.3
- Bluetooth Distance : Up to 10 meters
- Bluetooth Profile : A2DP/HFP/AVRCP
- Music Formats Supported: MP3, WMA, M4A, APE, FLAC
- Battery Capacity : 180 mAh
- Charging Input : 5V
- Charging Time : 1-2 hours
- Charging Indicator Indicator light: 1 Red/Blue light
- Playtime: Up to 8 hours @ 70% volume
WARNING
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However. there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
NOTE: This device and its antenna(s) must not be co-located or operated in conjunction with any other antenna or transmitter. The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
GUARANTEE
Your ESC Sounds Endurance are guaranteed for a period of 6 months from date of purchase. Subject to the terms below, the guarantee will provide for the repair or replacement of your ESC Sounds Endurance or any components thereof, which is identified as faulty or below standard, or because of inferior workmanship or materials.
The conditions of this guarantee are:
- The guarantee shall only apply to defects that occur within the 6-month guarantee period
- Proof of purchase is required
- The ESC Sounds Endurance are returned to
ESC Sounds as instructed
This guarantee does not cover any faults or defects caused by accidents,
misuse, fair wear and tear, neglect, tampering with the equipment, or any
attempt at adjustment or repair other than through approved agents.
This guarantee does not affect your statutory rights. Please retain this
document, as it acts as a guarantee certificate.
PRODUCT DISPOSAL INSTRUCTIONS:
The symbol shown here and on the product packaging means that the product is classed as Electrical or Electronic Equipment and should not be disposed with other household or commercial waste at the end of its working life. The waste of Electrical or Electronic Equipment (WEEE) Directive (2002/96/ EC) has been put in place to recycle products using best available recovery and recycling techniques to minimise the impact on the environment, treat any hazardous substances and avoid the increasing landfill
PRODUCT DISPOSAL INSTRUCTIONS FOR RESIDENTIAL USERS
When you have no further use for it, please dispose of the product as per your local authority’s recycling processes. For more information, please contact your local authority.
PRODUCT DISPOSAL INSTRUCTIONS FOR BUSINESS USERS
Business users should contact their suppliers and check the terms and conditions of the purchase contract and ensure that this product is not mixed with other commercial waste for disposal.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>