SHENGLAI STP3100 Wireless Headphone User Guide
- August 17, 2024
- SHENGLAI
Table of Contents
SHENGLAI STP3100 Wireless Headphone
Product Usage Instructions
Charging the Headphone
- Attach the small end of the USB cable to the charging port on the headphones.
- Attach the other end to a USB port on a computer or USB charging adapter.
- A red light will turn on during charging and change to blue when charging is complete.
Pairing the Headphone
On an iOS or Android device:
- Go to SETTINGS > BLUETOOTH (Ensure Bluetooth is turned ON).
- Select “STP3100 BTHP” to pair the headphone.
Controls
- Power On/Off: Hold down the power button to turn the product on or off.
- Play/Pause Music: Press the Play/Pause button to pause or resume music playback.
- Voice Assistant: Press and hold the Call button to activate voice assistant on connected smartphones.
FAQ
- Q : What do the LED indicator colors signify?
- A: The red light indicates charging, while blue indicates a full charge.
Features
- Headphone
- Built-in 160mAh rechargeable lithium battery
- Charging port
- LED indicator
Contents
- Headphone
- USB-C charging cable
- User Manual
A Quick Look
- Volume + / Next Track
- Power On/Off, Play / Pause Music
- Volume – / Previous Track
- Accept / End / Reject Calls / Voice Assistant
- LED Indicator
- AUX port
- Charging Port
- Mic
Charging the Headphone
- To charge the headphone, attach the small end of the usb cable to the charging port located on the headphone.
- Attached is the other end of the USB port on a computer, USB charging adapter.
- A RED light will turn on while the headphones are charging and turn BLUE once charging is complete.
Pairing the Headphone
- When you turn your headphones on, it will start to flash Red and Blue alternately.
- Open your smartphone’s Bluetooth menu to enable Bluetooth and search for Bluetooth devices. Select “STP3100 BTHP” from the list of devices.
- After sucessfully pairing, you will hear a voice prompt from the headphone.
On an IOS or Android Device
Go to SETTING>BLUETOOTH
(Make sure Bluetooth is turned ON)
Controls
-
Power On/Off
To turn on the product, hold down the power button. Hold down the button again to turn off the product. -
Play/Pause music
When playing music, press the Play/Pause button to pause the music, and press again the same button to resume playing the music. -
Volume + / Next track
Press the Volume + / Next track button to increase the music volume. Hold down the same button if you want to advance to the next track. -
Volume – / Previous track
Press the Volume – / Previous track button to decrease the music volume. Hold down the same button if you want to return to the previous track. -
Call controls
When receiving an incoming call, press the Call button once to accept the call, and press again to decline the call. If you press and hold the Call button, it will reject the incoming call instead of picking it up. -
Voice assistant
If the headphone is connected to a smartphone with a voice assistant enabled (Such as Siri for iOS or Google Assistant for Android), you can activate the voice assistant from your headphone by pressing and holding the Call button.
Specifications
- Driver Diameter : 40mm
- Sensitivity: 85+/-3dB
- Bluetooth Version: v5.3
- Transmission range :10m
- Battery capacity: 160mah
- Charge time: approx 2H
• Playtime: approx 20 H
FCC Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. This
device complies with Part 15 of the FCC Rules. Operation is subject to the
following
two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
The device has been evaluated to meet general RF exposure requirements. The
device can be used in the portable exposure condition without restriction.
FCC ID: 2AL9B-STP3100