DEFENDER 3K Plus Guard Pro PTZ Dual Lens User Guide
- August 17, 2024
- Defender
Table of Contents
DEFENDER 3K Plus Guard Pro PTZ Dual Lens
Specifications
- Model: 3K Guard Pro PTZ Dual-Lens Camera
- Warranty: 2 or 3 years
- Power Supply Cable Length: 10ft
- Power Extension Cable Length: 25ft
- Wi-Fi Connection: 2.4 GHz
Product Information
The 3K Guard Pro PTZ Dual-Lens Camera comes with advanced features such as
Wi-Fi connectivity, LED indicators, built-in microphone, IR capabilities,
micro SD card slot, spotlight, speaker, and a reset button. The camera is
designed for easy installation and setup.
What’s Included
The package includes the camera, power supply, power extension cable, mounting hardware, mounting template, Ethernet waterproof cable shield, window warning sticker, quick start guide, and free lifetime customer support. You will need a Wi-Fi internet connection, drill or Phillips #2 screwdriver, drill bits for pilot holes and wall anchors, and a compatible Android or iOS phone.
Important Notes
Ensure the camera power supply is not exposed to water as it is not
waterproof. Follow regulatory information based on the model purchased and the
country of use. Maintain a minimum distance of 20cm between the radiator and
your body for safety.
Getting Started
- Download the Defender Guard app and create an account with your email for verification.
- Plug in the camera to power and wait for the LED indicator to flash green.
Setting Up Your Camera
Step 1: Connect your phone to a 2.4 GHz Wi-Fi network before pairing the camera.
FAQs
Q: How do I extend my warranty?
To extend your warranty to 2 or 3 years, visit DefenderCameras.com/pages
/extended-warranties
within 60 days of purchase and follow the instructions provided.
Q: What should I do if my device malfunctions?
If the LED indicator shows a red light or indicates device malfunction, try
resetting the camera using the reset button or contact
DefenderCameras.com/Support for
assistance.
PROTECT
Covered for the unexpected
SUPPORT
Receive videos, tips & updates for your product
VALUE
Exclusive access to special offers
Open your camera & scan this QR code, or visit: DefenderCameras.com/Warranty
EXTEND YOUR WARRANTY
Don’t forget to protect your purchase and ease your mind by extending your
included 1 year manufacturer warranty to 2 or 3 years. If something goes
wrong,
our team of Security Experts will get you back up and running fast!
Extended Warranties can be purchased up to 60 days after your product’s
purchase.
2 YEAR WARRANTY
Extend your peace of mind to two years Product Defects
Advanced Replacements Free Return Shipping
3 YEAR WARRANTY
Extend your peace of mind to three years Product Defects
Advanced Replacements Free Return Shipping
Open your camera & scan this QR code, or visit: DefenderCameras.com/pages
/extended-warranties
3
WHAT’S INCLUDED
WHAT YOU’LL NEED
3K Guard Pro PTZ Dual-Lens Camera Camera Power Supply (10ft) Camera Power Extension Cable (25ft) Camera Mounting Hardware Camera Mounting Template Camera Ethernet Waterproof Cable Shield Window Warning Sticker Quick Start Guide Free Lifetime Customer Support
Wi-Fi Internet Connection Drill and/or a Phillips #2 screwdriver 3/32″ drill bit for pilot holes 7/32″ drill bit for wall anchors 7/8″ long drill bit A compatible Android or iOS phone
IMPORTANT: The Camera Power Supply is NOT waterproof.
REGULATORY INFORMATION
The regulatory information herein might vary according to the model you
purchased. Some information is only applicable for the country or region where
the product is sold.
FCC Information CAUTION
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
FCC Conditions: This device complies with part 15 of the FCC Rules. Operation
is subject to the following two conditions: · This device may not cause
harmful interference. · This device must accept any interference received,
including interference that may cause undesired operation. · This equipment
complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment
should be installed and operated with minimum distance 20cm between the
radiator & your body.
FCC Compliance: This equipment has been tested and found to comply with the
limits for a digital device, pursuant to part 15 of the FCC Rules. This
equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communication. · For class A device, these limits are
designed to provide reasonable protection against harmful interference in a
commercial
environment. Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be required to correct
the interference at his own expense. · For class B device, these limits are
designed to provide reasonable protection against harmful interference in a
residential installation. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
· Reorient or relocate the receiving antenna. · Increase the separation
between the equipment and receiver. · Connect the equipment into an outlet on
a circuit different from that to which the receiver is connected. · Consult
the dealer or an experienced radio/TV technician for help.
Privacy Protection Notice As the device user or data controller, you might
collect personal data of others such as face, fingerprints, car plate number,
Email address, phone number, GPS and so on. You need to be in compliance with
the local privacy protection laws and regulations to protect the legitimate
rights and interests of other people by implementing measures include but not
limited to: providing clear and visible identification to inform data subject
the existence of surveillance area and providing related contact.
4
PRODUCT DETAILS
Wi-Fi Antenna LED Indicator
IR Built-in Mic
IR
QR Code
Ethernet Cable Connector (Optional for hard wire connection)
Power Adapter Connector
LED
Micro SD Card Slot (Remove cover to access)
Spot Light
Reset Button
Speaker
RESET 10 s
5
LET’S GET STARTED
IMPORTANT: Screenshots and some steps may vary based on the device used to
step up the App.
1: Download the App
Download the Defender Guard app and follow the steps to create an account. An
email account is required for verification.
2. Plug-In Your Camera to Power On
Before connecting your camera to the App, wait 60 seconds for the LED
indicator light to flash green.
LED Status
Device Status
Green
Flashing Solid
Ready to set up the device Working properly
Network disconnected Flashing
Failed to set up the device Red
Booting Solid
Device malfunction
Green & Red Alternating Updating firmware
Power off
Off
/
LED turned off
Internet
12 VDC 1 A
Wi-Fi
6
SETTING UP YOUR CAMERA Step 1: Connect to Wi-Fi and Pair Your Camera
IMPORTANT: Before pairing, ensure your phone is connected to a 2.4 GHz Wi-Fi
network
1. Tap + to add your camera, then tap Scan QR code.
2. Ensure Bluetooth is turned on your phone and tap Next.
Note: If your mobile device cannot scan the QR code, tap “Add Manually”
3. Wait for the camera LED to flash
4. To ensure connection, please
green slowly. Tap “Next” to proceed.
keep your phone, device and
router close to each other.
7
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>