di-soric IRSD-35P Inductive Ring Sensor Owner’s Manual
- August 16, 2024
- di-soric
Table of Contents
di-soric IRSD-35P Inductive Ring Sensor
Specifications
- Model: IRSD-35P-G3-B4
- Type: Inductive ring sensor
- Enclosure: Type 4X (indoor use only), 12, 13
- Supply Class: 2 NFPA 79 Applications only
- Service Voltage: 10 – 30 V DC
- Switching Output: Gegentakt/PNP/NPN, 100 mA, NO/NC
- No-load Current: 30 mA (max)
- Speed of Parts: 0.1 m/s (min) – 35 m/s (max)
- Protection Type: IP 67
- Ambient Temperature during Operation: Not specified
Product Usage Instructions
Safety Instructions:
General Safety Notice: WARNING! Not a safety component under 2006/42/EG and EN 61496-1/-2! May not be used for personal protection! Non-compliance can lead to death or serious injuries! Only use as directed!
Installation
- Ensure the power supply voltage is within the range of 10 – 30 V DC.
- Connect the sensor according to the switching output specifications provided.
- Mount the sensor in a suitable location where it can detect the desired parts effectively.
Operation
- Power on the sensor within the specified voltage range.
- Adjust the sensor settings if necessary based on the speed of the parts being detected.
- Observe the switching output behavior to ensure proper functioning.
DIMENSION
- Ring diameter
- sensitivity
Technical data
WIRING
- BK: black
- BN: brown
- BU: blue
- WH: white
Safety instructions
General safety notice
WARNING! Not a safety component pursuant to 2006/42/EG and EN 61496-1/-2!
May not be used for personal protection! Non-compliance can lead to death or
serious injuries! Only use as directed!
As of 05/17/24, subject to change
Enclosure Type 4X (indoor use only), 12, 13 Supply Class 2
NFPA 79 Applications only. For ad- apters providing field wiring I- ans refer
to product information or customer support.
MORE INFORMATION
- di-soric GmbH & Co. KG Steinbeisstraße 6
- DE-73660 Urbach Germany
- Tel: +49 (0) 7181/9879-0
- info@di-soric.com
- www.di-soric.com
SCANNER
FAQ
- Q: Can the inductive ring sensor be used outdoors?
- A: No, the sensor is designed for indoor use only.
- Q: What is the maximum speed of parts that the sensor can detect?
- A: The sensor can detect parts moving at speeds up to 35 m/s.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>