sauna life CL7G Outdoor Sauna Owner’s Manual

CL7G Outdoor Sauna

“`html

Specifications

• Product: Cube Luxury Series CL7G Outdoor Sauna
• Dimensions: 87 inches (Depth) x 91 inches (Width) x 93 inches
  (Height)

Product Usage Instructions

Tools Required for Construction:

• Measuring tape
• Marker pen
• Circular saw
• Water level
• Hammer
• Screwdriver
• Extra hands
• Drill
• Crescent wrench
• Utility knife
• Rubber mallet
• Ratchet strap

Assembly Steps:

1. Refer to the manual before starting the construction
   process.

2. Use the measuring tape to ensure accurate placement of
   components.

3. Mark the necessary points with a marker pen for precise
   cutting.

4. Utilize the circular saw to cut materials as per the provided
   dimensions.

5. Assemble the sauna structure using the hammer, screwdriver, and
   other tools as needed.

6. Ensure proper alignment and stability during assembly with the
   help of extra hands.

7. Secure components in place using the drill, crescent wrench,
   and ratchet strap.

8. Fine-tune details and edges with the utility knife and rubber
   mallet.

Frequently Asked Questions (FAQ)

Q: What is the recommended minimum floor space required for

installing the CL7G Outdoor Sauna?

A: A minimum floor space of 27 square feet is recommended for
the installation of the CL7G Outdoor Sauna.

Q: How many people are required for the assembly of the

sauna?

A: It is recommended to have at least two people available for
the assembly process to ensure ease and safety.

Q: Are additional tools required for maintenance after

construction?

A: Basic tools like a screwdriver and utility knife may be
needed for minor maintenance tasks post-construction.

“`

Cube Luxury Series CL7G Outdoor Sauna
87D” x 91W” x 93H”

Note: Please read manual before construction

Rev: 1.0_6/2024

Cube Luxury Series CL7G Outdoor Sauna
87D” x 91W” x 93H”

74.41″ ~92.91″ ~85.43″

27.16″

90.94″ 87.40″

10.63″

70.86″ 86.61″

15″

43.3″

18.1″ 8.27″

31.5″

14.85″ 15.75″

Rev: 1.0_6/2024

Tools needed

Measuring tape Marker pen Circular saw

Water level

Hammer

Screwdriver

Extra hands

L=min.27 ft.

Drill

Cresent wrench

Utility knife Rubber mallet

Ratchet strap

CL7G Outdoor Sauna 87D” x 91W” x 93H”

DET 1

x2

Article.

K-SM100/2100XX

DET 2

x6

Article.

K-SM100/1300

DET 3

x1

Article.

T-STL117/1927XLM01

DET A1

x3

82.68″ 4″ 2″ 51.18″ 4″ 2″ 75.87″ 4.33″ 1.65″

Article. MU-VIT1880-KLZN DET W

x2 kmpl

Article. MU-TRAPP

DET 3b

x5

Article. T-STL117/1927-01V

DET 3a

x5

Article. T-STL117/1927-01P

DET 3b/H

x1

Article. T-STL117/1927-02V

DET 3a/H

x1

Article. T-STL117/1927-02P

DET Sb

x1

Article. IC-TE-26-PR-12/15V

W2

W1

W3 W4

75.87″ 4.6″ 1.65″

75.87″ 4.6″ 1.65″

75.87″ 4.6″ 1.65″ 75.87″ 4.6″ 1.65″

86.23″ 30.52″ 1.07″

Details list 1/5
~74″

CL7G Outdoor Sauna 87D” x 91W” x 93H”

DET Sa

x1

Article. IC-TE-26-PR-12/15P

DET Ta

x1

Article.

T-SL117/710UK1

DET Tb

x1

Article. T-TL94/710J

DET V

x4

Article.

KI-VIN-25/40/40-ZN

DET U1

x1

Article.

K-TL94/2200

DET Y1

x1

Article. T-IC-PTS-226/28-V

DET Y2

x1

Article. T-IC-PTS-226/28-P

DET U2

x1

Article. K-TL94/1940 DET 3d

x31

Article. T-STL117/2200-01V DET 3c

x30

Article. T-STL117/2200-01P

86.23″ 30.52″ 1.07″ 27.95″ 7.96″ 1.1″
27.95″ 3.7″ 1.1″ 1.58″ 1.58″ 1″
86.62″ 3.7″ 1.1″
86.88″ 46.65″ 1.1″ 86.88″ 42.32″ 1.1″
76.38″ 3.7″ 1.1″
86.61″ 4.6″ 1.65″ 86.61″ 4.6″ 1.65″

Details list 2/5

CL7G Outdoor Sauna 87D” x 91W” x 93H”

DET 6a

x1

Article. T-STL117/2200XL-01P

DET 6b

x1

Article. T-STL117/2200XL-01V

DET 6c/d/e/f

x1

Article.

T-STL117/2200KO-01

DET 4a

x2

Article. T-TL42/1370 DET 4b

x15

Article.

T-TL94/270

DET A2

x3

86.61″ 2.32″ 1.65″ 86.61″ 2.32″ 1.65″
86.61″ X” 1.65″
53.93″ 1.65″ 1.1″ 10.63″ 3.7″ 1.1″

Article.

MU-VIT5600-KLZN

DET G

x1

Article. MU-VENT-100-PU

DET F

x3

Article.

MU-VENT-100-ZN

DET 10 Article.

x2

70.52″ 20.48″ 2.84″

TL-LAMOD-1791-KA01

DET 10b

x4

Article. T-HP44/720XP01

28.35″ 1.73″ 1.73″

Details list 3/5
X 1″ ³/” ³/” 1 ³/”
~221″

CL7G Outdoor Sauna 87D” x 91W” x 93H”

DET 10c

x6

Article.

T-HP44/170

DET 11

x2

Article. TL-STMOD-1770-KA01

DET 12

x2

Article. TL-LAMOD-1791/210

DET 12a

x4

Article.

T-HP44/250XP-XP

DET 15a

x2

Article.

TL-LAV90/670XP

DET 15b

x2

Article. TL-LAV42/90

DET 15c

x2

Article. TL-LAV42/770

DET 15d

x1

Article. TL-LAV90/920

DET 21

x1

6.7″ 1.73″ 1.73″ 69.7″ 15″ 2.84″
70.52″ 8.27″ 2.84″ 9.85″1.73″1.73″ 26.38″ 3.55″ 1.1″ 3.55″1.65″1 .1″ 30.32″1.65″1 .1″ 36.22″ 3.55″ 1.1″

74.41″ *27.17″

Article. U-KL-7/19-PR

DET 21c

x2

Article. K-HP44/1890

74.41″ 1.73″ 1.73″

Details list 4/5

CL7G Outdoor Sauna 87D” x 91W” x 93H”

DET 21d

x2

Article.

K-HP44/780

DET 21a

x2

Article.

K-HL44/1860

DET 21b

x2

Article. K-HL44/750

DET 22

x2

Article. T-STL-2200-XX

30.71″ 1.73″ 1.73″ 73.23″ 1.73″ 0.71″ 29.53″ 1.73″ 0.71″
86.61″2″2″

Underlay felt 39´5″

Details list 5/5

Article.

KAT-AL

DET N

x9

Article. KAT-HAR-MUST DET O

x77

Article. KAT-SIN-MUST

DET 25a

x8

Article.

L=~63″

MU-OL-IC-226-1

DET 25b Article.

x8

L=~17″

MU-OL-IC-226-2

Article. KI-KERL-12-RV6
C

L=~9.85″

D

E

x6

x12 x12

Article.

M

KI-USA-ICO-226

H I

Bit PH2

L

K

J

” x 1¼ ” x 1½” ³/ ” x 2″ /” x 2¼”
³/” x 3½”

Torx bits T10 T15 T20 T25

~430 x20 x60 x40 x340 x80

CL7G Outdoor Sauna 87D” x 91W” x 93H”
Exterior

CL7G Outdoor Sauna 87D” x 91W” x 93H”
12x M

6x DET 2

Diagonal measurements should be equal! Back

inch=inch

2x DET 1
I
inch=inch 4″
Top view.

12x M

2x DET W W2

W1
W3 W4

inch=inch
II 1.

Top view. Front

12.79″ 7.87″

4x M DET 3

3.94″
Side view.
Attention! Install DET A1 before DET 3. DET A1

CL7G Outdoor Sauna 87D” x 91W” x 93H”

3.94″
Side view.

Use rubber mallet!

Top view.

DET 3b/H have slot at the end.

Fix screws over the one board, diagonally in every board.

Top view.
2.

DET 3a/H have slot at the end.

Screw pattern.

28x M

Use rubber mallet!

3.94″
Side view.

Fix DET 3b/H with four screws. 1x DET 3b/H
DET 3b/H have slot at the end.

Top view.

5x DET 3b

5x DET 3a
DET 3a/H have slot at the end.
1x DET 3a/H Fix DET 3a/H with
four screws.

Top view.

CL7G Outdoor Sauna 87D” x 91W” x 93H”

Front glass-wall assembly

Sa Ta

Inside

Sb

Inside

Attention! Place backside up!
Tb

Inside

Outside

Marking to bottom
I

Outside will have an extra notch around the edge.

min.1″

Top view

min.0.79″ Attention! Be extra
careful to not hit the glass!!!
3.

U1 4x I
III

Inside

Inside

II 4x DET V

16x J

Top view

min.1″

min.0.79″
Attention! Be extra careful to not hit the glass!!!

CL7G Outdoor Sauna 87D” x 91W” x 93H”
Wooden back wall assembly
Y1 Y2

I

Pre-drill holes 5/32″ before screws.
4.

4x H 4x I
II

DET U2 2x H

Pre-drill holes 5/32″ before screws.

CL7G Outdoor Sauna 87D” x 91W” x 93H” Use waterlevel
inch=inch
Sauna midpoint
Pre-drill holes Ø/”
3x H
5.

DET U1 inside
Make sure the marking on the wall is centered in the notch.

CL7G Outdoor Sauna 87D” x 91W” x 93H”

4x H

I
Make sure the marking on the wall is centered in the notch.
6.

DET 3c DET 3d
Fix temporarily to support walls.

DET U2 inside

II

2x H

CL7G Outdoor Sauna 87D” x 91W” x 93HR”emove DET 3c/d from their
temporary positions and use during the next step. H
Use rubber mallet!

Place DET A1 before you start installing wallboards.

DET 3c DET 3d
I

H See the next page.

DET 3c DET 3d

Gap
II 7.

~1/4″ H
Important! Leave space. IMPORTANT! Be sure to leave a 1/4″ gap when tightening screws to leave room for adjustment when the outer bands (A2) are installed.
H
Use rubber mallet!

CL7G Outdoor Sauna 87D” x 91W” x 93H” DET 3d

6a 6b 6c 6d 6e 6f

DET 6a/6b/6c

A

DET 3c

If needed, trim the flat edge of the

Join boards together (as shown in diagram III)

board to create the desired width.

that will bridge the width of the “A” gap. It is

recommended that the combined boards are

I

II approximately 1/4″ wider than the gap.

Raise slightly before installing the combined board
Use rubber mallet!

III

x5 Use the appropriate length screws to fasten the halves together as shown in the diagram.
Pre-drill holes Ø1/8″

IV

CL7G Outdoor Sauna 87D” x 91W” x 93H”
12x H

2xDET 4a

I
Don´t fix nuts very tightly yet!

DET A2

E D
C

E

D

DET A1
III 9.

56x H

14xDET 4b
II

Pre-drill holes Ø/”

DET A2

Don´t fix nuts very tightly yet!

E D
C

E

D

DET A1

CL7G Outdoor Sauna 87D” x 91W” x 93H”
Place ratchet strap near the ends of the boards. Pay attention to measurement.

Remove all screws

I
Now fix all nuts tightly!

min.2.36″ Side view.
DET A2

E

C

D

2xDET A2

E

D

DET A1 III

II
DET A2

Now fix all nuts tightly! Remove ratchet strap!

E D C

E

D

DET A1

CL7G Outdoor Sauna 87D” x 91W” x 93H”
Remove all temporary braces
I
Interior
II 11.

1xDET G

Upper vent

6x K Lower vent

3xDET F

6x K

CL7G Outdoor Sauna 87D” x 91W” x 93H” 4x DET 10b

A
I
Pre-drill holes Ø ³/”

2x DET 10
12x J

Fasten the opposite sides in the same way!

10x I

Use pre-drilled hole.
12.

2x I
III

Attention! Leave ~0.2″ gap from back of benching coming into contact
with barrel staves!

~0.2

End view.

B

B

A

II

Use level for benches installation.

4x H

CL7G Outdoor Sauna 87D” x 91W” x 93H”

Pre-drill holes Ø/”

2x DET 11

Pre-drill holes Ø/”

Under the benches

Fasten the opposite sides in the same way!

8x H

I

4x DET 10c

II

Pre-drill holes Ø/”

Pre-drill holes Ø/”

6x H

18.5″ 18.5″

2x DET 10c

4.6″

4.6″

4x H

III

CL7G Outdoor Sauna 87D” x 91W” x 93H”
Pre-drill holes Ø/”
1x DET 12

Pre-drill holes Ø/”

2x H

2x H

1x DET 12

Use waterlevel.

2x M
I

Use waterlevel.

Pre-drill holes Ø/”

II
8x H

2x M

Use waterlevel.

Pre-drill holes Ø/”

Use waterlevel.

4x DET 12a
III 14.

CL7G Outdoor Sauna 87D” x 91W” x 93H”
ATTENTION! HEATER GUARD MAY NOT MEET THE SAFETY DISTANCES OF ALL HEATERS AND SHOULD NOT BE USED IF THE HEATER DOES NOT FIT!
2x DET 15a
Pre-drill holes /”

2x H
2x DET 15b
If Your sauna heater is smaller, You can cut DET 15a to lenght from the non- tapered end to better fit your heater.
I

Pre-drill holes ³/”

2x J Pre-drill holes ¹/”

II

2x DET 15c

Place saunaheater first.

Pre-drill holes ¹/”

III 15.

6x I
1x DET 15d
Pre-drill holes ³/”
IV

4x J Pre-drill holes ¹/”

CL7G Outdoor Sauna 87D” x 91W” x 93H”

1x DET 21

2x M

Attention! The door must open outwards. If you need the door handle to be on the opposite side,
rotate door 180 degrees.

Outside
2x DET 21c 2x DET 21d
Outside

I
Pre-drill holes /”

2x M

1.11″
1.11″ 2x DET 21a 2x DET 21b

Use waterlevel.

18x H
III

16x J
IV

Attention! Place door from inside out.
II Ensure door frame is pressed tightly against the wall and fasten from inside.
8x H
V

CL7G Outdoor Sauna 87D” x 91W” x 93H”

~43.31″

5x H

2x DET 22
I

5x H

CL7G Outdoor Sauna 87D” x 91W” x 93H”
Underlay felt installation manual. Attention! Refer to underlay installation manual provided in package.

Cut off

Remove

bottom

film first.
I

over

~2″ the edge.

Turn end to the edge.

Cut and remove top film
Clamp end to the edge.

Proceed same way

II

as shown in diagram I

~2″ over the edge.

III 18.

Cut off the parts that extend over the edge.

CL7G Outdoor Sauna 87D” x 91W” x 93H” Attention! Refer to shingle installation manual provided in package.
End view.

DET N

End view.

~0.35″
I

Cut and use it on the ohter side

Shingles overlap on top

Attention! Refer to shingle installation manual provided in package.

End view.

Side view.

Cut
II 19.

DET O

Cut and use it other end.

~0.35″
Attention! Refer to shingle installation manual provided in package.
Refract DET N into 3 pieces.
DET N
III

CL7G Outdoor Sauna 87D” x 91W” x 93H”

4xDET 25a 4xDET 25b
28x H
20.

4xDET 25a 4xDET 25b
28x H

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>