V-TAC VT-7973 LED Designer Hanging Light Installation Guide
- August 16, 2024
- V TAC
Table of Contents
V-TAC VT-7973 LED Designer Hanging Light
Product Specifications
- Model: VT-7973
- SKU: 23363
- Watts: 18W
- Lumens: 2100 LM
- Beam Angle:
- Material: Metal+Wood
- Base Size: D200 mm
- Dimensions: D400xH1400 mm
- Input Power: AC220-240V, 50/60Hz
Product Usage Instructions
Introduction & Warranty:
WARNING: This product contains replaceable control gear and LED light source. Replacements should be done by a professional. This product is not dimmable.
Installation Instructions:
Refer to the installation diagram provided in the user manual for step-by-step instructions on installing the LED Designer Hanging Light.
Frequently Asked Questions
Q: Is the LED Designer Hanging Light dimmable?
A: No, this product is not dimmable. Attempting to dim the light may result in damage to the fixture.
Q: Can I replace the LED light source myself?
A: It is recommended to have the LED light source replaced by a professional to ensure proper installation and safety.
TECHNICAL DATA
| MODEL | VT-7973 |
|---|---|
| SKU | 23363 |
| WATTS | 18W |
| LUMENS | 2100 LM |
| BEAM ANGLE | 180° |
| MATERIAL | Metal+Wood |
| BASE SIZE | D200 mm |
| DIMENSION | D400xH1400 mm |
| INPUT POWER | AC220-240V,50/60Hz |
INTRODUCTION & WARRANTY
Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions carefully before starting the installation and keep this manual handy for future reference. If you have any another query, please contact our dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at the best. The warranty is valid for 2 years from the date of purchase. The warranty does not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no warranty against damage to any surface due to incorrect removal and installation of the product. The products are suitable for 10-12 Hours Daily operation. Usage of product for 24 Hours a day would void the warranty. This product is warranted for manufacturing defects only.
WARNING
- Please make sure to turn off the power before starting the installation.
- Installation must be performed by a qualified electrician.
- The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced.
- Proper grounding should be ensured throughout the installation.
- For Indoor Use only
This marking indicates that this product should not be disposed of with other
household wastes.
Caution, risk of electric shock.
INSTALLATION DIAGRAM
- Switch off the power before starting the installation.
- Use screws to fix mounting bar to the junction box.
- Make the wire connections with connectors .
- Connect the live wire (L) from fitting to the live wire from main power supply.
- Connect the neutral wire (N) from fitting to the neutral wire from main power supply.
- Connect the earth wire from fitting to the earth wire from main power supply.
- Please pay close attention and make sure the wires are not exposed outside when wiring connections.
- Use screws to fix canopy to mounting bar .
- Check if the installation is completed and turn on the power.
Note: This light is designed with adjustable height, press the pin on the canopy to adjust the height of the light.
IN CASE OF ANY QUERY/ISSUE WITH THE PRODUCT, PLEASE REACH OUT TO US AT:
SUPPORT@V-TAC.EU
FOR MORE PRODUCTS RANGE, INQUIRY PLEASE CONTACT OUR DISTRIBUTOR OR NEAREST
DEALERS.
V-TAC EUROPE LTD. BULGARIA, PLOVDIV 4000, BUL.LKARAVELOW 9B
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>