Wordans MO2124 Wireless Charging Lamp Speaker User Manual
- August 16, 2024
- Wordans
Table of Contents
USER MANUAL
MO2124 Wireless Charging Lamp Speaker
(2014/53/EU art. 10-8)
For wireless speaker:
(a) Frequency Range; 2402-2480 MHz
(b) Maximum radio-frequency power; 20mW (EIRP)
For wireless charger:
(a) Frequency Range; 110-205 kHz
(b) Wireless Power; 10 W Max.
(2014/53/EU art. 10-9 Simpfied Decaration of Conformty )
Hereby, MOB, decares that tem MO2124 complies with the essental requirements
and other relevant condtions of Directve 2014/53/EU. The fu text ofthe EU
declaration of conformity is avaable at the folowing internet address:
www.momanual.com
MOB, PO BOX 644, 6710 BP (NL).
http://qr.morethangiftscatalogue.com/compliance
MO2124
Wireless charging lamp speaker
Specifications:
A. Touch switch for LED light
B. Wireless charging panel
C. Bendable frame
D. Wireless speaker
E. LED light
F. Type-C input: DC 9V, 2A
G. Indicator of wireless charger
Wireless speaker:
Wireless will turn on and enter pairing mode automatically once connected wth
provided cable for power supply. Go to the Wireless setting on your mobe,
tablet, or other Wireless enabled devces. When you see MO2124 on the list,
click it to connect.
Then you can start paying music from your device through the Wireless speaker.
LED light:
- There are three modes of led light colours you can select. You can short press the touch button to switch the mode from white(cool) colour -> Mix colour (warm and cool) -> yellow (warm) light mode.
- Under any of the LED light modes, you can long press the touch button to adjust the brightness.
Wireless charger:
Wireless chargng function will turn on automatically once connected to a suitable power source. Please put your smart phone on to the wireless charging panel. Make sure your mobe is placed on the right area of the wireless charging point. Then it will start charging your mobile automatically. The white LED indicator will flash slowly once the wireless charging is working. Make sure your phone is compatible with wireless charging functon.
Remark: Wireless speaker and wireless charger cannot be used at the same time when input power lower than 9V 2A
Speaker parameters:
Power supply: USB 5V 500mA
Speaker: 40mm 4Ω 3W
Working Range: Up to 10m
Version: 5.1
LED light parameters:
Input: USB 5V 500mA
6pcs yellow LED: Warm ght
6pcs white LED: Cool light
Colour Temperature: 2700K – 6500K
Brightness: 34lm +/- 2
Wireless charger parameters:
Input: 9V/2A
Output: 9V/1.1A (10W)
Working Range: 3-5mm
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>