AISNDYOG Shoe Storage Box Instructions
- August 15, 2024
- AISNDYOG
Table of Contents
AISNDYOG Shoe Storage Box
Package Include
Important Structure Detail
Important Structure Detail for Installation
Installation Instruction
Step 1
- A: Squeeze the crease 1,3 with your fingers.
- B: Squeeze the crease 2,4 with your fingers.
- C: Both lines need to be folded
Step 2
- Fold the four foldable ears into the box body.
Step 3
- Put the box body up, clip the 4 slots of the back lid into the edge of the box body.
- The skill is that clip one of the short slots into the box body, then install the other side like the picture as follow. After installing the back lid, turn it over to check whether the slot has been clipped into the box body.
Step 4: Install the front lid
Warning
- Please make sure that the protruding points of front lid are at the same side with the back lid’s protruding points like the picture as follow .
- Install the front lid like the step 3.
Disassemble Instruction
- Step 1: Disassemble the front lid: Open the door of the front lid, press firmly on the foldable ear, then pull the back lid up to separate it from the box body. And do the same to disassemble another side.
- Step 2: Follow the step 1 to disassemble the back lid.
Stacking Shoe Boxes Instructions
- Connect the protruding points on the back row first
- Then move one box forward and the other box backward slightly, so that the protruding points in the front row can be stuck steadily
- Buckle the front parts first, then follow to align the back end parts with each other, then drop down and buckle.
- When stacking, you can stack in a horizontal or vertical row at first, and then group the rows together. The specific assembly steps refer to the following figure
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>