memmert IF450bw Blanket Warmer Instruction Manual

: August 15, 2024
: Memmert

Table of Contents

memmert IF450bw Blanket Warmer
Product Specifications
FAQ
INTRODUCTION
DIMENSION
Temperature
Communication
Electrical data
Packing/shipping data
CONTACT
Read User Manual Online (PDF format)
Download This Manual (PDF format)

memmert IF450bw Blanket Warmer

Product Specifications

Model: IF450bw
Description: The Memmert blanket warmer IFbw is a Class I medical device designed for warming chamber loads in research, pharmaceutics, medicine, and food chemistry.
Technical Data
Temperature:
- Setting temperature range
- Working temperature range
- Setting accuracy temperature
- Temperature sensor: Pt100 sensor DIN class A in 4-wire-circuit
Control Technology:
- Language setting
- ControlCOCKPIT
- Timer Function
- SetpointWAIT Calibration adjustable parameters
Ventilation: Fan with forced air circulation in the working chamber at a fixed value of 100%
Communication: AtmoCONTROL software for data management via Ethernet interface
Safety: Autodiagnostic system for fault analysis
Standard Equipment: Works calibration certificate, stainless steel interior, etc.
Dimensions Interior: 1040 x 720 x 600 mm (w x h x d)
Electrical Data: 230 V, 50/60 Hz, approx. 1800 W

FAQ

Q: Can I adjust the language setting on the incubator?
A : Yes, you can change the language setting using the ControlCOCKPIT interface.
Q: What is the maximum loading capacity per internal?
A : The maximum loading per internal is 30 kg.

INTRODUCTION

The heating of this incubator is optimally tuned for forced air circulation. Valuable chamber loads for research, pharmaceutics, medicine, and food chemistry are warmed up very carefully. On this page, you can find all the essential technical data on our incubator. Our customer relations team will be pleased to help if you want further information. If you should require a customized special solution, please contact our technical specialists at sales@memmert.com.

DIMENSION

Temperature

Setting temperature range +20 to +80 °C
Working temperature range min. 10°C above ambient up to +80°C
Setting accuracy temperature 0.1 °C
Temperature sensor 1 Pt100 sensor DIN class A in 4-wire-circuit

Control technology

Language setting German, English, Spanish, French, Polish, Czech, Hungarian
ControlCOCKPIT SingleDISPLAY. Adaptive multifunctional digital PID-microprocessor controller with high-definition
TFT-colour display
Timer Digital backward counter with target time setting, adjustable from 1 minute to 99 days
Function SetpointWAIT the process time does not start until the set temperature is reached
Calibration three freely selectable temperature values
adjustable parameters temperature (Celsius or Fahrenheit), fan speed, air flap position, program time, time zones,
summertime/wintertime
adjustable parameters temperature (Celsius or Fahrenheit), program time, time zones, summertime/wintertime

Ventilation

Fan-forced air circulation in the working chamber, fixed value 100 %

Communication

Documentation program stored in case of power failure
Programming AtmoCONTROL software for reading out, managing, and organizing the data logger via Ethernet interface (temporary trial version can be downloaded). USB stick with AtmoCONTROL software available as accessory (on demand).

Safety

Temperature control adjustable electronic overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off the heating approx. 20°C above nominal temperature
Autodiagnostic system for fault analysis

Standard equipment

Works calibration certificate incl. works calibration certificate for +37°C
Door fully insulated stainless steel door with 2-point locking (compression door lock)
Internals 2 stainless steel grid(s), electropolished

Stainless steel interior

Dimensions w(A) x h(B) x d(C): 1040 x 720 x 600 mm (d less 39 mm for fan)
Interior easy-to-clean interior, made of stainless steel, reinforced by deep drawn ribbing with integrated and
protected large-area heating on four sides
Volume 449 l
Max. number of internals 8
Max. loading of chamber 300 kg
Max. loading per internal 30 kg

Textured stainless steel casing

Dimensions w(D) x h(E) x d(F): 1224 x 1247 x 784 mm (d +56mm door handle)
Housing rear zinc-plated steel

Electrical data

Voltage Electrical load 230 V, 50/60 Hz approx. 1800 W
Voltage Electrical load 115 V, 50/60 Hz approx. 1500 W

Ambient conditions

Set Up The distance between the wall and the rear of the appliance must be at least 15 cm. The clearance from the ceiling must not be less than 20 cm and the side clearance from walls or nearby appliances must not be less than 5 cm.
Altitude of installation max. 2,000 m above sea level
Ambient temperature +5 °C to +40 °C
Humidity rh max. 80 %, non-condensing
Overvoltage category II
Pollution degree 2