Uueloglc VL-MIC100 Logitech Expansion Mic for MeetUp User Manual
- August 15, 2024
- Uueloglc
Table of Contents
USER MANUAL
VL-MIC100
INTRODUCTION
This MIC100 is an add-on microphone for the VB300 Videobar and is designed to extend pickup distance. It is ideal for applications in larger meeting room environments, where the range needs to be extended above 8m.
FEATURES
- 4x MEMS omnidirectional microphone arrays with a range of 3 meters.
- Supports AEC (Acoustic Echo Cancellation), AGC (Automatic Gain Control), ANS (Automatic Noise Suppression) and full duplex communication, making all participants feel like they are talking face-to-face.
- Supports cascading of up to six microphones for extending pickup range.
- Mic mute button with LED feedback.
- Able to work with VL-VB300 for audio signal extension.
PACKAGE CONTENTS
1x Microphone
1x 7m Mini USB to Mini USB Cable
2x Mini USB to RJ45 Connectors
1x Ceiling Mounted Bracket
SPECIFICATIONS
Audio and Video:
Input/Output: Mini USB
Microphone:
Microphone: 4x Omnidirectional microphone arrays Pick-up Range: 3m
Communication and Control:
USB: Mini USB
GENERAL:
| Operating Temperature | 0°C ~ 40°C |
|---|---|
| Storage Temperature | -20°C ~ 60°C |
| Humidity | 10% to 90%, non-condensing |
| Power Supply | Powered by Video Bar |
| Power Consumption | 1.5W (Max) |
| Dimension | 123mm x 36mm |
| Net Weight | 0.29kg |
PANEL DESCRIPTION
| ID | NAME | DESCRIPTION |
|---|---|---|
| 1 | 4x Mute/Unmute buttons. |
Press any of these buttons to mute or unmute all microphones, including the
one at the Video Bar and all other MIC100 units.
2| Status LED| • 4x solid white LEDs next to the symbol:
The microphone is working properly.
• 4x blinking white LEDs next to the symbol: The microphone is being upgraded.
• 3x solid blue LEDs in the direction of a sound: The microphone is picking up
sound. (Once the microphone completes pickup, the LEDs will turn off.)
• All LEDs solid red: The microphone is muted.
3| Microphone| 4x omnidirectional microphone arrays for picking up sound.
4| Input| Connect to the video bar or the upper level microphone. This port
supports power input.
5| Output| Connect to the other extendable micro-phone. This port supports
power output.
INSTALLATION
Before installation, please ensure the device is disconnected from the power
source.
The device can be installed on a tripod or any flat surface.
To install the device on a tripod:
- Screw the tripod’s clip into the 1/4“ (British standard) thread hole at the device’s bottom.
- Secure the device along with the clip on the tripod, adjust them to a position and height you desire.
Note: Tripod is not included in the package.
To install the device on the ceiling:
- Secure the provided mounting bracket on the ceiling using screws (screws are not included in the package).
- Place the threaded screw of the mount in the central threaded hole of the Mic and rotate counterclockwise until secure.
APPLICATION
Note:
- The VL-VB300 video bar supports up to six units of MIC100 microphone for cascading.
- If you intend to connect Cat6 cable between VL-VB300 and MIC100, we recommend that you use this cable for cascading the first units only and the mini USB cables for further units.
- The available length of cable connected between video bar and only one microphone is maximum 60m; for connection between video bar and multiple microphones, the length of all cables in total must not exceed 50m.
CE CONFORMITY
PureLink GmbH hereby declares that this product is in compliance with the
essential requirements and other relevant provisions of the RED Directive
2014/53/ EU and the RoHS Directive 2011/65/EU amended by 2015/863 EU. PureLink
GmbH hereby declares that this product is in compliance with the essential
requirements of the Electromagnetic Compatibility Regulations 2016 and all
other applicable UK regulations.
The EU Declaration of Conformity is available here:
DISPOSAL OF DEVICE
WEEE-Reg.-Nr. DE 93847290
According to the European WEEE Directive, electrical and electronic equipment
may not be disposed of with household waste. As a consumer, you are obliged to
return electrical and electronic equipment free of charge at the end of its
service life to the public collection points set up for this purpose or to the
point of sale. Details on this are regulated by the respective national law.
The symbol on the product, the instructions for use or the packaging refers to
these regulations Recycling old appliances in this way is an important
contribution to the protection of our environment.
WARRANTY AND LIABILITY
If any fault or damage is detected on your product, please contact your dealer and provide your sales slip or invoice as evidence of the purchase, if necessary. Your dealer will repair the fault either on site, or send the device PureLink. Please describe the possible faults in detail – only then you can be assured that faults, occurring only rarely, will be found and repaired with certainty! Any use other than described in this users manual is not permitted.
DISCLAIMER OF LIABILITY
PureLink GmbH will not be held liable, nor provide any warranty for damage resulting from improper installation, assembly and use of the product, or failure to observe the operating instructions and/or safety instructions.
TRADEMARK
Product model and logo are trademarks. All other trademarks mentioned in this
manual are acknowledged as the property of the trademark owners. No part of
this publication may be copied or reproduced without prior written permission
of their respetive owners.
For further support or questions please contact us under
https://www.purelink.de/en/anfrage-formular-purelink.de or scan the QR- code
below.
PureLink GmbH
Von-Liebig-Str. 10
D – 48432 Rheine
Germany
www.purelink.de
WEEE-Reg.-No. DE 93 847 290
PureLink UK LTD.
Carpenter Court, 1 Maple Road
Bramhall, Stockport
Cheshire SK7 2DH
United Kingdom
Documents / Resources
|
Uueloglc VL-MIC100 Logitech Expansion Mic for
MeetUp
[pdf] User Manual
VL-MIC100, VL-MIC100 Logitech Expansion Mic for MeetUp, VL-MIC100, Logitech
Expansion Mic for MeetUp, Expansion Mic for MeetUp, Mic for MeetUp, MeetUp
---|---