DOMICA AM-015 Fountain Pump Operating Manual
- August 12, 2024
- DOMICA
Table of Contents
DOMICA AM-015 Fountain Pump
INTRODUCTION
The DOMICA AM-015 Fountain Pump is a great option to keep your water features looking beautiful and vibrant. This compact and strong water pump, manufactured by reputable water pump manufacturer DOMICA, was introduced in early 2023. Its continuous flow rate of 220 GPH makes it ideal for small to medium-sized ponds, aquariums, and fountains. The AM-015 guarantees the colorful and energetic appearance of your water feature, with a maximum lifting height of 4.9 feet. With its low weight of 5.6 ounces and reasonable $14.99 price tag, it offers value and effectiveness, making it affordable for both pros and enthusiasts. Its 15-watt energy-efficient motor runs smoothly and dependably on a typical 110V–120V/60Hz power source. The DOMICA AM-015 Fountain Pump is an excellent choice for anyone seeking a cost- effective and high-performing fountain or tranquil pond.
SPECIFICATIONS
| Brand | DOMICA |
|---|---|
| Product Dimensions | 2.9 L x 2 W x 2.5 H inches |
| Power Source | AC |
| Item Weight | 0.35 Pounds |
| Maximum Flow Rate | 3.66 Gallons Per Minute |
| Maximum Lifting Height | 4.9 Feet |
| Voltage | 110 Volts |
| Manufacturer | DOMICA |
| Item Weight | 5.6 ounces |
| Wattage | 15 Watts |
| Model | AM-015 |
| Voltage | 110V-120V/60Hz |
| Power | 15 Watt |
| F-Max | 220 GPH |
| H-Max | 4.9 ft |
| Power Cord | 5.9 ft |
| Price | $14.99 |
WHAT’S IN THE BOX
- Submersible Pump Unit
- Power Cord
- Nozzle Attachments
- Suction Cups
- Manual
FEATURES
- Ultra Quiet Design: The pump’s sturdy, dependable engine means that there is very little noise produced, which makes it perfect for calming down tiny aquariums, fish tanks, ponds, water gardens, and hydroponic systems.
- A knob on the device allows for the adjustment of the flow rate, which has a maximum capacity of 220 gallons per hour (GPH). Water flow can be precisely controlled as a result.
- Maximum Flow Rate: To provide efficient water circulation, the pump has a maximum flow rate of 3.66 gallons per minute (GPM).
- Maximum Lifting Height: 4.9 feet of water can be raised, making it ideal for a variety of water features and uses.
- Compact Size: Measuring just 2.9 x 2.0 x 2.5 inches, its diminutive size makes it suitable for covert placement in aquatic settings.
- Lightweight: At just 0.35 pounds (5.6 ounces), it’s simple to handle and requires little effort to install.
- Power Source: 110 volts of regular AC power is used to run this device with dependable performance.
- Wattage: The pump uses 15 watts of power, which guarantees economical use of energy.
- Power wire Length: The 5.9-foot power wire that comes with the pump allows you to position it anywhere you see fit.
- Simple Installation: No tools are needed for detachment, making setup simple. It takes little time to clean and rebuild the pump.
- Submersible Design: The water input must be completely submerged for the pump to function, and the pump must be completely submerged in water.
- Versatile Mounting: This system has four suction cups at the bottom for a solid installation that lets you spray water both vertically and horizontally.
- Sturdy Construction: Designed to be dependable and long-lasting, ideal for a range of water-related uses.
- Waterproof Cord: In damp conditions, the power cord’s waterproof design improves durability and safety.
- Reasonably priced at $14.99, it provides an affordable option for modest water fountains.
SETUP GUIDE
- Unpack the Pump: Take the pump out of its packing and make sure every component is there.
- Select a Location: Choose a location for your pond, water garden, aquarium, or fish tank where the pump can be completely submerged.
- Put the four suction cups on the pump’s bottom firmly against the surface you want to mount it on to attach the suction cups. Stability is ensured by this.
- Immerse the Pump: To stop air from entering the system, submerge the pump entirely in the water, making sure the water input is submerged.
- To connect the power cord, insert it into a regular AC outlet. Make sure the connection is safe and dry.
- Flow Rate Adjustment: Using the adjustable knob, select the appropriate flow rate for your requirements.
- Check the Pump: Once the pump is operating properly, turn it on. As needed, alter the flow rate.
- Look for Leaks: Make that the area around the pump and the connections is leak-free.
- Place the Pump: To get the appropriate water flow and height, move the pump around as needed.
- Safeguard the Pump: Verify that the pump is steady and that the suction cups are securely fastened.
- Watch First Operation: Make sure the pump is operating appropriately and silently by watching it for a few minutes.
- Clean the Pump: Use clean water to rinse the pump and get rid of any manufacturing residues before using it for the first time.
- Adjust Water Height: If necessary, raise or lower the water level to correspond with the pump’s maximum lifting height.
- Regular Maintenance: Make sure the power cord stays dry and the pump is kept appropriately submerged by checking the setup on a regular basis.
- Store Correctly: To extend the life of the pump, keep it somewhere cool and dry while not in use.
CARE & MAINTENANCE
- Frequent Cleaning: To avoid clogging, clean the pump on a regular basis. Take it apart and give each part a thorough cleaning with fresh water.
- Verify that no debris or algae is obstructing the intake or outflow by checking for it.
- Examine the Power Cord: Continually look for any indications of wear or damage on the power cord, and replace it as needed.
- Suction Cup Cleaning: Take out and wash the suction cups to make sure they continue to hold the pump in place.
- If necessary, descale the pump by using a vinegar solution if you observe a buildup of mineral deposits.
- Verify Submersion: Whenever the pump is operating, verify sure the water input is completely submerged.
- Check Flow Rate: Depending on your demands, periodically modify the flow rate to maintain optimal performance.
- Examine for Leaks: Continually look for any indications that the pump is malfunctioning or leaks.
- put Dry: To avoid damage, put the pump in a dry location while not in use.
- Avoid Running Dry: The engine may be harmed if the pump is used without enough water.
- Keep an eye on Performance: Pay attention to any strange sounds and feel for any variations in the pump’s operation.
- Replace Worn Parts: As soon as any parts show signs of wear or damage, get new ones.
- Safe Location: Make sure the pump stays in a safe location to prevent it from moving.
- Seasonal Maintenance: If the pump is being used outdoors, conduct comprehensive maintenance inspections both before and after seasonal changes.
TROUBLESHOOTING
| Issue | Possible Cause | Solution |
|---|---|---|
| Pump not starting | Power cord not plugged in properly | Ensure the power cord |
is securely plugged in
Low water flow| Clogged nozzle or filter| Clean the nozzle and filter
Excessive noise| Air trapped in the pump| Submerge the pump fully to remove
air
Pump stopping intermittently| Overheating due to low water level| Ensure the
pump is fully submerged
Water not reaching maximum height| Insufficient power supply| Check voltage
and power source
Pump vibrating excessively| Improper installation| Ensure the pump is placed
on a stable surface
No water flow| Blockage in the intake| Clear the intake of debris
Water flow fluctuates| Air bubbles in the system| Remove air bubbles by
tilting the pump
Pump running but no water output| Impeller blockage| Check and clean the
impeller
Pump does not turn off| Malfunction in the switch| Replace or repair the
switch
Water leaking from pump| Cracked or damaged housing| Replace the pump housing
Pump humming but not working| Jammed impeller| Disassemble and clear the
impeller
Pump overheating| Clogged intake or low water level| Clean intake and ensure
adequate water level
Uneven water spray| Nozzle partially blocked| Clean or replace the nozzle
Pump tripping the circuit breaker| Electrical short or overload| Inspect
wiring and connections
PROS & CONS
PROS:
- Energy-efficient with a 15-watt motor.
- High flow rate of 220 GPH for vibrant water features.
- Affordable price at $14.99, offering great value.
- Compact and lightweight, making it easy to install.
- Quiet operation, suitable for indoor use.
CONS:
- Limited lifting height of 4.9 feet.
- Best suited for small to medium setups, not large ponds.
- Lacks advanced features found in premium models.
- Can be damaged if run without water.
- Short warranty period.
WARRANTY
The DOMICA AM-015 Fountain Pump comes with a limited one-year warranty , which covers any manufacturing defects and faults in materials or workmanship. This warranty ensures that the pump is free from defects for a period of one year from the date of purchase. Should any issues arise within this period, DOMICA offers repair or replacement of the defective unit.
FREQUENTLY ASKED QUESTIONS
What is the maximum flow rate of the DOMICA AM-015 Fountain Pump?
The DOMICA AM-015 Fountain Pump has a maximum flow rate of 3.66 gallons per minute, which is equivalent to 220 gallons per hour (GPH).
What is the maximum lifting height of the DOMICA AM-015 Fountain Pump?
The DOMICA AM-015 Fountain Pump can lift water up to a maximum height of 4.9 feet.
What voltage does the DOMICA AM-015 Fountain Pump operate on?
The DOMICA AM-015 Fountain Pump operates on 110 volts.
How much power does the DOMICA AM-015 Fountain Pump consume?
The DOMICA AM-015 Fountain Pump consumes 15 watts of power.
What are the dimensions of the DOMICA AM-015 Fountain Pump?
The dimensions of the DOMICA AM-015 Fountain Pump are 2.9 inches in length, 2 inches in width, and 2.5 inches in height.
How long is the power cord for the DOMICA AM-015 Fountain Pump?
The DOMICA AM-015 Fountain Pump has a power cord that is 5.9 feet long.
How much does the DOMICA AM-015 Fountain Pump weigh?
The DOMICA AM-015 Fountain Pump weighs 0.35 pounds, which is approximately 5.6 ounces.
What is the price of the DOMICA AM-015 Fountain Pump?
The DOMICA AM-015 Fountain Pump is priced at $14.99.
What type of power source does the DOMICA AM-015 Fountain Pump use?
The DOMICA AM-015 Fountain Pump uses an AC power source.
How does the maximum lifting height of the DOMICA AM-015 Fountain Pump compare to other pumps?
The DOMICA AM-015 Fountain Pump has a maximum lifting height of 4.9 feet, which is moderate compared to other pumps. It is suitable for smaller fountains but may be limited for larger setups requiring higher lifting capabilities.
What wattage does the DOMICA AM-015 Fountain Pump use?
The DOMICA AM-015 Fountain Pump uses 15 watts of power.
How does the DOMICA AM-015 Fountain Pump's flow rate impact its performance?
The DOMICA AM-015 Fountain Pump's flow rate of 3.66 gallons per minute allows for a steady water flow, which is ideal for creating gentle water features in smaller fountains.
Why is my DOMICA AM-015 Fountain Pump not turning on?
Ensure that the DOMICA AM-015 Fountain Pump is properly plugged in and that the power outlet is functioning. Check the power cord for any visible damage and make sure the fuse or circuit breaker has not tripped.
What should I do if the DOMICA AM-015 Fountain Pump is not pumping water?
First, check if the DOMICA AM-015 Fountain Pump intake is clogged with debris. Clean the intake screen and ensure that the water level is sufficient to cover the pump. Also, inspect the impeller for any damage or blockage.
Why does my DOMICA AM-015 Fountain Pump keep shutting off?
If the DOMICA AM-015 Fountain Pump is shutting off unexpectedly, it could be due to an overheating issue, a power supply problem, or a faulty motor. Check the power source, clean the pump, and ensure it is properly submerged to prevent overheating.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>