DOMICA AM-005 Fountain Pump User Manual

DOMICA AM-005 Fountain Pump

INTRODUCTION

DOMICA AM-005 Fountain Pump, a small but effective device made to bring your small water features to life. This DOMICA pump is great for small fountains, ponds, and tanks because it reliably moves water around and creates a relaxing atmosphere. It’s easy to set up and keep up with the AM-005, which is only 1.8 inches long, 1.6 inches wide, and 1.4 inches high and weighs only 3.5 ounces. This pump can handle 110 volts AC power and has a maximum flow rate of 1.5 gallons per minute. It can also lift things up to 3 feet high. Since it only costs $8.99, the DOMICA AM-005 is a great choice for people on a budget who want good performance in a small package. The fact that it only uses 5 watts of electricity means that it has low running costs while still circulating water continuously.

SPECIFICATIONS

WHAT’S IN THE BOX

• Fountain Pump
• Manual

FEATURES

• Ultra-Quiet Operation: The motor in the pump is stable and long-lasting, and it runs quietly, so it can be used in places where noise reduction is important.
• Submersible Design: The pump is made to work in water and must be fully submerged for it to work.
• Small Size: The pump is only 1.8″ x 1.6″ x 1.4″, which makes it very small and easy to hide in the water.
• Adjustable Flow Rate: It has a knob that lets you change the flow rate of the water, and it can go as fast as 90 GPH (1.5 gallons per minute).
• Maximum Water Lift: It can raise a tower of water up to 3 feet, which lets you make a lot of different kinds of water features.
• Easy to Use: You don’t need any tools to take it off, and it’s also very easy to separate for cleaning.
• Setup is quick and easy; all you have to do is plug the pump into a power source to get it working.
• Waterproof Power Cord: The 4.6-foot power cord is waterproof, so it can be used safely and reliably even when it’s wet.
• With three suction cups on the bottom, it can be securely attached to objects and can be set up either horizontally or vertically.
• Uses: It can be used in small aquariums, fish tanks, ponds, work fountains, pet fountains, water gardens, and hydroponic systems, among other things.
• High Efficiency: It only uses 5 watts of power, so it works well while using little power.
• Durable Construction: Made with high-quality materials to make sure it works well and lasts a long time.
• Tool-Free Maintenance: Made so that it’s easy to take apart and clean without any extra tools.
• Adjustable Spray Height: Because the flow rate can be changed, the water spray height and patterns can be changed to suit your needs.
• Small and Lightweight: It only weighs 3.5 ounces, so it’s light and easy to handle and set up.

SETUP GUIDE

• Unpack the Pump: Take the DOMICA AM-005 Fountain Pump out of its box and make sure all of its parts are inside.
• Prepare the Installation Area: Find a spot in your tank, pond, or fountain where the pump can go underwater and won’t get in the way of other equipment.
• Connect Suction Cups: Glue the three suction cups firmly to the bottom of the pump so that it stays stable when it’s submerged in water.
• Connect tip: If needed, connect the right tip to the pump to get the water flowing the way you want it to.
• Submerge the Pump: Put the pump in water and make sure the water inlet is completely covered so that air doesn’t get into the system.
• Connect Power line: Connect the power line to a standard wall outlet. To avoid electrical dangers, make sure the cord is properly connected and out of the way of water.
• Change the Flow Rate: The knob lets you change the water flow rate and spray height.
• Check for Leaks: Before full operation, check the pump and its links for any leaks or other problems.
• Power On: To get the water moving, turn on the pump. Keep an eye on the performance to make sure it’s working right.
• Position Change: If you need to, move the pump around to get the best water flow and effect on the water.
• Check Operation: Make sure the pump is working right by checking it on a regular basis.
• Add Water: Make sure there is enough water in the pond or tank to fully cover the pump while it works.
• Clean the initial setup: Run water over the pump and its parts to get rid of any production residues or dirt.
• Set Up Spray Patterns : If you have more than one spray, try setting them up in different ways to get the fountain effect you want.
• Finish Setting Up: Once everything is set up and working properly, finish positioning and make any needed changes.

CARE & MAINTENANCE

• Regular Cleaning: To keep the pump running well and stop algae from growing, clean it and all of its parts on a regular basis.
• Replace Filter Cotton: If your machine has a filter, clean or replace it as needed to keep it from getting clogged.
• Check for Clogs: Look for dirt or other things that might be blocking the pump’s intake and nozzles. This could affect how well they work.
• Check Power Cord: To make sure it’s safe, check the power cord often for any signs of damage or wear.
• Maintain Submersion: To keep air out of the system, make sure the pump stays fully submerged.
• Watch the Water Levels: Make sure the water level stays the same so you don’t run the pump dry, which can damage it.
• Clean the Suction Cups: The suction cups need to be cleaned every so often to make sure they keep working and the pump in place.
• Check for Leaks: Check the pump and its links often for any signs of leaks or other problems.
• Change the Flow Rate: Change the flow rate as needed to keep the water flowing properly and stop the parts from wearing out too quickly.
• Winterize Pump: If you use the pump outside in the winter, take it off and store it somewhere dry to keep it from freezing and breaking.
• Avoid Chemicals: Do not clean or use strong chemicals on the pump; they can damage the parts.
• Check Performance: Check the pump’s performance on a regular basis and fix any problems right away.
• Replace Parts: Any worn or broken parts should be replaced right away to make sure the machine keeps working properly.
• Keep Area Clean: Keep the area around the pump clean to keep trash and algae from building up.

TROUBLESHOOTING

connection and clean the pump
Low Water Pressure| Blocked inlet or low water level| Clean the inlet and refill the water feature
Pump Not Starting| Faulty power connection or dry pump| Ensure proper connection and fully submerge the pump
Noisy Operation| Air trapped in the pump| Tilt the pump slightly to release air bubbles
Uneven Water Flow| Obstruction in the nozzle| Clean the nozzle to remove debris
Water Leaking| Improper installation or loose connections| Reassemble the pump and secure all connections
Decreased Flow Rate| Pump wear or debris buildup| Clean the pump and check for signs of wear
Pump Overheating| Continuous operation without breaks| Allow the pump to cool periodically and check for blockages
Water Splashes Outside Feature| Spray height set too high| Adjust the nozzle or spray height to reduce splashing
Pump Vibration| Loose installation or debris inside pump| Secure the pump and clean out any debris
Water Discoloration| Algae growth or dirty water| Clean the water feature and use appropriate treatments
Pump Running but No Water Flow| Airlock or blockage in the intake| Prime the pump and clear the intake
Cord Length Issues| Insufficient cord length for placement| Use an extension cord with proper outdoor rating

PROS & CONS

PROS:

• Affordable pricing at $8.99.
• Compact and lightweight design for easy installation.
• Low power consumption of just 5 watts, making it energy-efficient.
• Maximum lifting height of 3 feet for small water features.
• Delivers a good flow rate of 1.5 gallons per minute.

CONS:

• Limited to small water features due to its compact size.
• A maximum lifting height of 3 feet may not be sufficient for larger displays.
• Basic design with no advanced features.
• Corded electric power source limits placement options.
• Plastic construction may be less durable than metal alternatives.
• Requires regular cleaning to maintain optimal performance.

WARRANTY

The DOMICA AM-005 Fountain Pump comes with a standard 1-year warranty , providing coverage for any manufacturing defects or performance issues. DOMICA is dedicated to customer satisfaction, offering repair or replacement services within the warranty period.

FREQUENTLY ASKED QUESTIONS

What is the DOMICA AM-005 Fountain Pump?

The DOMICA AM-005 Fountain Pump is a compact water pump designed for use in fountains. It provides efficient water circulation and is powered by AC electricity.

What are the dimensions of the DOMICA AM-005 Fountain Pump?

The pump measures 1.8 inches in length, 1.6 inches in width, and 1.4 inches in height, making it small and suitable for various fountain setups.

How much does the DOMICA AM-005 Fountain Pump weigh?

The pump weighs 3.5 ounces, which is lightweight and easy to install in a fountain.

What is the maximum flow rate of the DOMICA AM-005 Fountain Pump?

The maximum flow rate is 1.5 gallons per minute, providing adequate water movement for small fountains.

What is the maximum lifting height of the DOMICA AM-005 Fountain Pump?

The maximum lifting height is 3 feet, allowing the pump to effectively lift water to a reasonable height within the fountain.

What is the power source for the DOMICA AM-005 Fountain Pump?

The pump is powered by AC electricity, operating at 110 volts.

What is the wattage of the DOMICA AM-005 Fountain Pump?

The pump operates at 5 watts, making it energy-efficient while providing reliable performance.

What is the size designation for the DOMICA AM-005 Fountain Pump?

The pump is designated as 90 GPH 5W, indicating its flow rate and power consumption.

What is the price of the DOMICA AM-005 Fountain Pump?

The DOMICA AM-005 Fountain Pump is priced at $8.99, making it an affordable option for fountain enthusiasts.

Why is my DOMICA AM-005 Fountain Pump not turning on?

If your DOMICA AM-005 Fountain Pump isn’t turning on, ensure it is properly plugged into a working power outlet. Check the power cord for any visible damage, and if the pump still doesn’t start, the internal motor or fuse might be faulty and require replacement.

What should I do if the water flow in my DOMICA AM-005 Fountain Pump is weak?

Weak water flow in your DOMICA AM-005 Pump could be due to a clogged intake or dirty impeller. Clean the intake and impeller to remove any debris, and make sure the water level in the fountain is adequate for proper operation.

Why is my DOMICA AM-005 Fountain Pump making a loud noise?

Loud noise from the DOMICA AM-005 Pump could be caused by trapped air in the pump or debris in the impeller. Ensure the pump is fully submerged in water, and clean the impeller to remove any blockages.

How can I fix my DOMICA AM-005 Fountain Pump if it stops working intermittently?

Intermittent operation of the DOMICA AM-005 Pump might be due to overheating or loose electrical connections. Ensure the pump is not clogged and has adequate water flow. Check all electrical connections for security and tighten any loose wires.

Why is my DOMICA AM-005 Fountain Pump leaking water?

Water leakage from the DOMICA AM-005 could be due to a damaged seal or a crack in the pump housing. Inspect the pump for visible damage, and replace any worn seals or the pump itself if necessary.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>