NAYAX VPOSMS POS Payment Device User Guide

VPOSMS POS Payment Device

Product Information

Specifications

• Operating System: Android 11.0 Go
• CPU: Quad-core @ 1.5GHz
• Memory: 2GB RAM + 16GB ROM (LPDDR3)
• Display: 4.0 IPS, 480 x 480
• Camera: 2M front camera
• Scanner: N/A
• Cellular Network: Support 2G/3G/4G
• WIFI: IEEE 802.11 a/b/g/n 2.4G & 5G
• Bluetooth: Version 4.2, support BLE
• Payment Interface: Support IC/NFC Card Connector 20PIN
• Audio: Buzzer
• Battery: 220mAh/3.8V (Rated capacity)

Product Usage Instructions

Suitable Scenarios
The product is suitable for indoor, outdoor, and unattended scenarios, including but not limited to restaurants, supermarkets, tourist attractions, vending machines, coffee machines, parking facilities, laundry services, EV charging stations, car wash stations, vacuum cleaner stations, chair massage services, gaming setups, unattended toilet booths, unattended lockers, and kiddie rides.

VPOSMS Installation
VPOSMS should be installed in compatible machines such as vending machines and coffee machines for optimal performance.

Attention & Safety

Warning: Read all instructions and safety information before use to avoid injury. The operating ambient temperature limits must be adhered to.

Battery Safety: Dispose of used batteries according to the manufacturer’s instructions. Danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent type of battery recommended by the manufacturer.

Equipment Damage Disclaimer
The free warranty does not cover equipment damage caused by natural disasters, falls, self-disassembly, or non-compliance with operation specifications.

Statement
Details in the document may be inconsistent with the real product due to updates. Please consider the actual product as the standard. The company reserves the right to interpret the document.

FCC Regulations
This product complies with part 15 of the FCC Rules. Users are advised to follow regulations to prevent harmful interference and ensure compliance with FCC RF Exposure limits.

Product Diagram – Quick Guide

• NFC Card Reader: NFC antenna located at the bottom of the screen for contactless data acquisition.
• IC Card Reader: Used for secure insertion of bank chip cards.
• Display Set: For merchants to complete business settlements and customers to input payment passwords.
• Connector 20PIN: Used for device charging and connecting peripheral devices supporting OTG.

FCC RF Radiation Exposure Statement
To comply with FCC RF Exposure requirements, maintain a separation distance of at least 20cm between antennas and persons when in use.

FAQ

• Q: What should I do if the device is damaged due to a natural disaster?
  A: Equipment damage caused by natural disasters is not covered by the free warranty. Contact customer support for further assistance.

• Q: Can I replace the battery with any type?
  A: No, replace the battery only with the same or equivalent type recommended by the manufacturer to prevent risks of explosion.

Technical Specs

The product is suitable for indoor, outdoor and unattended scenarios, such as restaurants, supermarkets, tourist attractions, vending machines, coffee machine, parking, laundry, EV charges,car wash, vacuum cleaner, chair massage, gaming, unattended toilet booth, unattended lockers, kiddie ride, etc.
VPOSMS is installed in the machines, such as vending machines, coffee machine, etc.

ATTENTION

Warning

• Read all instructions and safety information before use to avoid injury.
• The limit operating ambient temperature of the device declared by the manufacturer is -10~55°C.

Battery safety

• Dispose of used batteries according to manufacturer’s instructions.
• Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type of battery recommended by the manufacturer.

Statement

• The equipment damage caused by natural disasters, falling, self disassembly and non-compliance with the operation specifications is not covered by the free warranty.
• Some details of this document may be inconsistent with the real object due to the update iteration of the product. Please take the real object as the standard, and our company reserves the right to interpret this document.

VPOSMS
Quick Guide

Product Diagram

• NFC Card Reader
  NFC antenna locates at the bottom of the screen. It’s used to sense chip and acquire data through contactless way.

• IC Card Reader
  Used for inserting the bank chip card and getting information securely.

• Display
  Set for merchants to complete business settlement and for customers to input the password to finish the payment.

Connector 20PIN
Used for device charging and plugging in peripheral device which supports OTG.

FCC Regulations

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.

Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment.

FCC RF Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. To comply with FCC RF Exposure compliance requirements, this grant is applicable to only Mobile Configurations. The antennas used for the transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co‐located or operating in conjunction with any other antenna or transmitter.

RF exposure statement
RF exposure information: The Maximum Permissible Exposure (MPE) level has been calculated based on a distance of d=20 cm between the device and the human body. To maintain compliance with RF exposure requirement, use product that maintain a 20cm distance between the device and human body.

Declaration of Conformity
Hereby, [NAYAX Ltd.] declares that the radio equipment type
[POSPaymentDevice,VPOSMS ] is in compliance with Directive
2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet
Address: www.nayax.com
CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS

Package List

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>