iWALK PowerGrip Mag User Manual

iWALK PowerGrip Mag

Product Information

Specifications

• Brand: XYZ
• Model: ABC123
• Color: Black
• Material: Plastic
• Dimensions: 10 x 5 x 3 inches
• Weight: 1.5 lbs

Product Usage Instructions

Setup

Before using the product, ensure that it is properly assembled according to the instructions provided in the manual.

Power On

Plug the product into a power source and press the power button to turn it on.

Adjust Settings

Use the control panel to adjust settings such as temperature, speed, or intensity based on your preferences.

Usage Guidelines

Follow the recommended guidelines for usage duration and intervals to ensure optimal performance and longevity of the product.

Maintenance

Regularly clean and maintain the product as per the instructions provided in the manual to prevent any issues and extend its lifespan.

Frequently Asked Questions

Q: How do I clean the product?

A: To clean the product, use a soft damp cloth with mild detergent. Do not use harsh chemicals or abrasive materials.

Q: Can I use the product outdoors?

A: This product is designed for indoor use only. Using it outdoors may damage the product and void the warranty.

Q: What should I do if the product malfunctions?

A: If the product malfunctions, refer to the troubleshooting section of the manual or contact customer support for assistance.

Product Introduction

Charge your phone or devices

1. You can use Trickle-Charging mode to charge headphones or other low-power devices.
2. After turning on the product, double-click the button to activate the Trickle-Charging mode. The power LED or display screen will start flashing. Double-click the button again to exit this mode.

Recharge your PowerGrip Mag

Press the power button to use the Pass-through Charging

Specifications

• Product Name: PowerGrip Mag
• Model No.: MXB007
• Capacity: 6000mAh(3.85V/23.1Wh)
• USB-C In/Out: 5V 3A,9V 2A, 12V 1.5A
• Wireless Charging: 5W/7.5W/10W/15W
• Size: 105.9×66.9×20.8mm
• Weight: 154.2g

This wireless charger is not compatible with non-MagSafe phone cases, such as Otterbox Defender cases.
Do not use an adapter with an output of 5V/1A (5W) or less. |
High temperatures will reduce charging speed and restrict power, which is something that happens to all wireless chargers. It is recommended that you charge your device in environments with temperatures below 25°C / 77 F.

IMPORTANT SAFETY INSTRUCTIONS

Please make sure to notice the following reminder:

1. The operating temperature of the product should be between 0°C and 40°C / 32°F and 104°F.
2. DO NOT place the product near a fire source or in a high-temperature environment. Avoid placing it in a car, kitchen, bathroom, or any other high-temperature and high-humidity areas. Exposure to fire or excessive heat may cause an explosion.
3. DO NOT use the product if it has been submerged in water. Keep it away from rain and snow.
4. Using chargers or charging cables not recommended or sold by the manufacturer, or those that do not meet local safety standards, may result in fire or injury.
5. Ensure someone is present while charging the product. Unplug the power when going out or leaving for an extended period of time.
6. DO NOT charge the product in places like bags, on beds, or sofas, as this can affect heat dissipation. Avoid covering it with clothing, bedding, or other items while charging.
7. DO NOT let children use the product unsupervised. Close supervision is required when the product is used near children.
8. DO NOT attempt to disassemble the product. For service or repairs, contact the manufacturer’s after-sales service. Incorrect disassembly or reassembly can cause fire or injury.
9. The product may become hot during use, which is normal. Limit contact with high-temperature areas to less than 10 seconds.
10. The product contains a built-in lithium battery. Be aware of the risk of fire and burns. DO NOT attempt to replace the battery yourself.
11. DO NOT disassemble, strike, crush, or burn the product. If it swells, leaks, deforms, or overheats, stop using it immediately.

UK RK Products Ltd
Address: 35 BRAEMAR GARDENS LONDON POSTCODE: NW9 5LB
Email: support@iwalkrkproducts.co.uk
Tel: +44 7944216897

US KMK international Inc
Address: 105 S. 54th Ave Unit F Denver CO 80239 US
FRN of U.S. agent: 0033494972
Email: sales@aideaz.net
Tel: +1 347 200 8459

• www.iwalkworld.com/Service
• Service@iwalk.net
• CN +86-400-8855-698 | Mon-Fri 09:00-17:00 Head Office +86-592-5030-771/780 | Mon-Fri 09:00-17:00
• @WALK.Fans @iWALKKOREA @iWALKJAPAN

PA1351
MADE IN CHINA

Warranty card

Thank you for purchasing the iWALK product.
Our product’s warranty period is 12 months starting from the date of purchase. Within the warranty period, free service will be provided to the consumer.If the product has any quality problems(requiring warranty card with distributor’s official stamp and valid S/N).

Dealer’s Information

• Dealer Name:
• Product Type:
• Tel:
• Sales Date:

User’s Information

• Model No.:
• Product Name:
• User’s Name:
• E-mail:
• Tel:
• ADD:
• Warranty Content:

Please complete warranty card and use for any future warranty service

FCC

FCC Warning Statement: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>