iWALK LinkPod W2 fast Charging Power Bank User Guide
- June 13, 2024
- iWALK
Table of Contents
iWALK LinkPod W2 fast Charging Power Bank
Product Information
This product is designed to provide reliable performance without causing interference to radio or television reception. However, in certain installations, interference may occur. This equipment complies with Part 15 of the FCC Rules, which ensures that it does not cause harmful interference and accepts any interference received. The device has been evaluated to meet general RF exposure requirements, allowing it to be used in portable exposure conditions without any restrictions.
Product Usage Instructions
If you experience interference with radio or television reception while using this product, please follow the measures below to correct the issue:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a different circuit than the receiver.
- If the interference persists, consult the dealer or an experienced radio/TV technician for assistance.
By following these steps, you can minimize or eliminate any interference caused by the equipment. Remember to comply with FCC regulations and ensure that the device is used responsibly to maintain optimal performance.
Product Introduction
Charge your phone or devices
Recharge your LinkPod W2
Press the power button to use the Pass-through Charging
- During Pass-through charging, your Apple Watch will flash to indicate that it is fully charged
- When charging and discharging, give prlar1ty to fully chnrglng the moblle phone and then fUlly ch!lrglng the mobile power supply.
SPECIFICATION
- Product Name: LinkPod W2
- Model No.: LPW001
- Capacity: 10000mAh(3.6V/36Wh)
- USB-C Cable/Port Input: 5V= 3A,9V = 3A, 12V = 2.5A, 15V = 2A,20V = 1.5A
- USB-C Cable Output : 5V = 3A,9V = 3A, 12V = 2.5A, 15V = 2A,20V =1.5A
- Lightning Output: 5V = 3A,9V = 3A, 15V = 2A
- Wireless Charging: 3W
- Size: 105.9×29.8×54.2mm
- Weight: 205g
IMPORTANT SAFETY INSTRUCTIONS
Please make sure to notice the following reminder:
- Please store the product at the cool and dry place, don’t place the product in the high temperature or humid environment. Water intake and scorching isn’t allowed. Don’t place in the fire in case occur dangerous.
- Please charge the product by using the matched charging device. Don’t use the power supply, charger, charging line to charge the product in case cause damage to the product or lead to fire hazard to cause personnel damage and other adverse consequence.
- The working temperature shall fall between 0°C and 40°C (32°F-104°F).
- Please don’t dismantle the product. If the product needs to service or maintenance, please contact the after-sale maintenance personnel of the manufacturer to assist to process, so as to avoid causing the damage to the product or other dangerous.
- If not used for a long period of time, the product shall be charged and discharged once every three months.
- When charging, the product may be hot, which is normal and there is no need to worry.
- Under normal use, battery performance may gradually degrade in a few years.
- Improper use, falling or excessive force may damage the product.
- When disposing of old and useless batteries, please separate the batteries of different electrochemical systems.
Warranty card
Thank you for purchasing the iWALK product. Our product’s warranty period is 12 months starting from the date of purchase. Within the warranty period,free service will be provided to the consumer.If the product has any quality problems(requiring warranty card with distributor’ official stamp and valid S/N).
Paid service: customer will incur a repair charge as follows:
- No valid warranty card or warranty card incompatible.
- No S/N or S/N incompatible with warranty card.
- Malfunction caused by artificial damages(like external impact or submerging product into water.ect.)
- Misuse of the product.User has not followed the instructions in the manual.
- Product disassembled or repaired by individual or unauthorized service center.
- Damages caused by storing the product in a hot or humid environment.
- Defects or malfunctions due to force majeure.
Dealer’s Information
- Dealer Name:
- Product Type:
- Tel:
- Sales Date:
User’s Information
- Model No:
- Product Name:
- User’s Name:
- E-mail:
- Tel:
- ADD:
- Warranty Content:
- Please complete warranty card and use for any future warranty service
UK Authorized Representative
THEMISAR Support Itd. 85 Great Portland St,London,United Kingdom, W1W 7LT
Christopher Jones Tel: +44-(0)20-37332302 legal@themisar.com EU Authorized
Representative Real Solutions Haarlem B.V A.Hormanweg 75-2031BH Haarlem,
Netherlands
Tel: +31-(0)88-9277277 Contact: Mike de Zwart,MSc
US 1-888-961-5888 24/7 service UK 44-20-3885-0855 24/7 service CN 400-8855-698 Mon-Fri 09:00-17:00 Head Office 86–592-5030-771/780 Mon-Fri 09:00-17:00 (f@iWALK.Fans @iWALKUSA @iWALKJAPAN U20 GLOBAL CO.,LTD. Head Office/Manufacturer: U20 Building, Huanzhu Road 385,Jimei, Xiamen,Fujian,China U.S. Office : 206 Terminal Drive Plainview, NY 11803 Dubai Logistic Center : 201, Atrium centre, Bank Street, Bur Dubai, UAE. Korea Office: 4.19-ro 13-gil, Ganbuk-gu, Seoul, Korea EU Logistic Center: A. Hofmanweg 75-2031 BH Haarlem, Netherland
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>