V-TAC VT-1049 LED Table Lamp Instruction Manual
- August 12, 2024
- V TAC
Table of Contents
V-TAC VT-1049 LED Table Lamp Instruction Manual
TECHNICAL DATA
INTRODUCTION & WARRANTY
Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions carefully before starting the installation and keep this manual handy for future reference.
If you have any another query, please contact our dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at the best. The warranty is valid for 2 years from the date of purchase. The warranty does not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no warranty against damage to any surface due to incorrect removal and installation of the product. The products are suitable for 10-12 Hours Daily operation. Usage of product for 24 Hours a day would void the warranty. This product is warranted for manufacturing defects only.!
WARNING
- Please make sure to turn oš the power before starting the installation
- The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced.
MULTI-LANGUAGE MANUAL QR CODE
Please scan the QR code to access the manual in multiple languages.
This marking indicates that this product should not be disposed of with other household wastes.
PRECAUTIONS
- Indoor use only.
- Charge ONLY under 5V 1A.
- Charge under dry enviroment,and keep the light away from dust and water.
- Not allowed to put the light in the flammables and wet enviroment.
- Clean the light by so¤ fabric only, NO alcohol or other detergent.
OPERATION CAUTIONS:
- Please do not put the lamp on the high-temperature surfaces, and do not use it in flammable or humid environment, to avoid the breakdown, short circuit etc.
- The adapter must be under the specialized range.
- Please ensure to place the lamp on a steady base only.
OPERATION GUIDE
- Connect the charging base into adapter[not included]
- Connect the adapter[not included] into power source
- Tap on the button at the top of lamp to switch on/oš the lamp
- For Dimming function – Make sure the light is ON, tap on the touch button and hold for the light to increase/decrease the brightness. When turning on the lamp next time, the light brightness level will be the same as the last setting.
MAINTENANCE
- Please clean the lamp once in every two months to keep it smooth and bright.
- Use cleaning cloth and water to clean the dust
- For filthy marks, please use cleaning cloth and soapsuds.
- Please do not clean the lamp by high-volatility and high-corrosive liquid which can lead to discoloring or damaging the lamp.
PACKAGE CONTENT
IN CASE OF ANY QUERY/ISSUE WITH THE PRODUCT, PLEASE REACH OUT TO US AT:
SUPPORT@V-TAC.EU
FOR MORE PRODUCTS RANGE, INQUIRY PLEASE CONTACT OUR DISTRIBUTOR OR NEAREST
DEALERS. V-TAC EUROPE LTD. BULGARIA, PLOVDIV 4000, BUL.L.KARAVELOW 9B
Read More About This Manual & Download PDF:
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>