SteamSpa SC-SS0011-0S Infrared Sauna User Guide

SteamSpa SC-SS0011-0S Infrared Sauna

Specifications

• Model: SC-SS0011-0S
• Type: Infrared Sauna
• Version: v1.1
• Manufacturer: SteamSpa

Product Usage Instructions

Installation & Setup

1. Check for visible damages upon delivery of the sauna.
2. Verify that the model and accessories are correct, including voltage input.
3. Read the installation instructions carefully for a secure and effective setup.
4. Ensure installation is done strictly by the user manual to prevent damage or malfunction.

Operation

1. Power on the sauna following the provided instructions.
2. Set the desired temperature and timer settings for your session.
3. Enter the sauna and enjoy the therapeutic benefits of infrared heat.
4. Remember to stay hydrated during your sauna session.

Maintenance

1. Clean the sauna regularly as per the maintenance guidelines provided.
2. Inspect the sauna for any signs of wear and tear.
3. Ensure all components are functioning properly before each use.

Frequently Asked Questions

Q: How often should I use the infrared sauna?

A: The frequency of sauna usage depends on personal preference and health goals. It is generally safe to use the sauna a few times a week, but consult a healthcare professional if you have any concerns.

Q: Can anyone use the infrared sauna?

A: While infrared saunas are generally safe for most people, individuals with certain medical conditions or pregnant women should consult their doctor before using the sauna.

Q: How do I clean the sauna?

A: Use a mild detergent and water solution to wipe down the interior and exterior surfaces of the sauna. Avoid using harsh chemicals that may damage the sauna components.

DON’T WAIT! REGISTER NOW!

• Register your product within 90 days to ensure your sauna has warranty coverage.
• Mail in the completed registry card or register online at www.SteamSpa.com/register.

WARRANTY INFORMATION

PRODUCT REGISTRATION

IMPORTANT: Your warranty will not be recognized unless this card is fully completed and returned or online registration is completed.

To ensure that your warranty is registered and confirmed please do one of the following:

• Register online at www.SteamSpa.com/register. You will be asked to fill out the same information you would in the registration card. Registering online is fast, and secure and ensures we receive your information.
• Complete, cut out, and mail the registration card below. With your returning card, we confirm the date of purchase for your new product. This confirmation will allow us to process any warranty claims.

Mail the card to 5701 NW 35 Avenue, Miami, FL 33142

IMPORTANT WARRANTY INFORMATION!

WARRANTY AND REPAIR GUIDELINES

• SteamSpa warrants that this sauna unit will be free from manufacturer defects and malfunctions. For terms and conditions please refer to the latest SteamSpa Warranty at www.SteamSpa.com/warranty.
• Please be advised failure to comply with any of the following will VOID the warranty.
  1. Sauna must registered within 90 days of delivery. See www.SteamSpa.com/register.

Warranty Period:

• This product is covered under warranty for one year, commencing from the date of purchase.
• For further information or assistance, visit www.SteamSpa.com/warranty or call 1-800-856-0172.
• IMPORTANT! Malfunctions, damages, part replacements, and labor resulting from improper installation, negligence, or lack of care and maintenance will NOT be covered under the SteamSpa Warranty.
• BEFORE INSTALLATION, ENSURE THAT THE PRODUCT IS POWERED OFF.
• Thank You for choosing SteamSpa for health, beauty, and relaxation. Now you can enjoy your private sanctuary in the comfort of your own home.

USER INSTRUCTIONS

1. Check for visible damages upon delivery of the sauna. Any damages to packaging should be reported immediately to the shipping company delivery representative and SteamSpa’s Customer Service Dept.
2. Check model and accessories are correct, including voltage input. Any discrepancies are to be reported to SteamSpa’s Customer Service Dept. within 48 hours of delivery.
3. Read installation instructions in detail for a secure and effective installation of SteamSpa sauna.
4. SteamSpa shall not be responsible for product damage or malfunction caused by self-installation or installation procedures that do not comply with the user manual.
5. SteamSpa saunas are for indoor use only.

WARNING Please read carefully before using the sauna

DO NOT use the sauna product with any of the following Health Conditions.

1. Any type of respiratory condition
2. Any type of heart condition
3. High or low blood pressure
4. Pregnancy
5. Any skin disease or disorders
6. After or while drinking alcohol or alcoholic beverages
7. Hemophilia or are prone to bleeding

• Check with your doctor regarding the use of this product if you have any other health conditions.
• Hyperthermia occurs when the internal temperature of the body reaches a level several degrees above the normal body temperature of 98.6°F ( 37°C ).
• The symptoms of hyperthermia include an increase in the internal temperature of the body, dizziness, lethargy, drowsiness, and fainting.

The effects of hyperthermia include:

• a. Failure to receive heat
• b. Failure to reconize the need to exit, or Physical inability to exit the room
• c. Unawareness of impending hazard
• d. Fetal damage in pregnant women
• e. Unconsciousness

WARNING Please read carefully before using a sauna

• Children must use the sauna under the care of an adult. For safety, do not play with it.
• Do not insert objects such as fingers or sticks into the heating tube plate to prevent danger. Never pour water in the sauna, especially the heating board.
• Do not place items inside or on top of the sauna.
• Do not touch any electrical components with wet hands to prevent electric shock.
• Do not use the sauna during thunderstorms to prevent electric shock.
• Do not tilt the sauna, do not use sharp objects to strike the sauna.
• Shut down the sauna for half an hour after 4 hours of continuous use.
• Do not operate the sauna in a long-term high-temperature environment.
• Do not use after intense exercise, wait until the body temperature returns to normal before using. If you feel any discomfort, please stop using it immediately.
• Mind your head when getting in and out of the sauna.
• Do not sleep inside when the sauna is turned on.
• Do not use any bath products in the sauna.
• To avoid burns, do not touch the heating element.
• Please keep the seat timber and floor heater dry to avoid damage!
• Do not take pets into the sauna room.
• Do not spray water on the radiators, This may result in electric shock or damage to the radiators. Do not touch the light bulb in use.
• If the bulb needs to be changed, unplug the sauna and let the bulb cool down before changing it. Do not use the sauna room if you have trauma, eye disease, or burns.
• Do not install shower heads or water spray devices above or inside the sauna.
• Covering the heater or infrared emitter causes fire risk!

ASSEMBLY TIPS

• Before you begin, read all assembly instructions and safety warnings carefully.
• This sauna requires at least 2 adults to complete assembly.
• Remove all of the contents from the package and check that you have all the parts shown in the component list.
• NOTICE: Some parts may be pre-installed / pre-assembled.
• This manual is used for the assembly of several sauna models, some figures or drawings may not look exactly like your sauna.
• Protect the wood surface of the sauna during assembly to avoid damage.
• Keep this manual for future reference.

ELECTRICAL REQUIREMENTS

• It is recommended to consult a licensed electrician and check local ordinances before installing any sauna.
• This sauna requires that receptacle and circuit breaker specifications are 20 amp.
• Electrical modifications may be required to adapt 20 amp current.
• This sauna requires a dedicated circuit, other appliances may not share the same outlet as the sauna.

CHOOSING A LOCATION

• This sauna should be placed INDOORS on a dry, level surface only.
• There should be a minimum of 5 inches of clearance between the sauna and any wall.
• Make sure the main power cord will reach the outlet and remain easy to access.
• The sauna should only be used in a dry location, moisture will damage the wood and electrical components.
• Keep the sauna away form any potential hazards including water sources, flammable objects, and combustible materials.

RECOMMEND TOOLS

1. Pencil
2. Hammer
3. Tape Measure
4. Electric Drill
5. “+” screwdriver

SPECIFICATIONS

1950mm )
Power| 2080 Watts
Maximum Temperature| 149°F ( 65°C )
Voltage| 120V AC / 60Hz
Function| Control panel with temp adjust and timer, Audio with USB drive/Bluetooth/FM, Color LED light, Oxygen ionizer

PRODUCT SIZE CHART

COMPONENTS

1. Duster cover
2. Light
3. Control box
4. Left board
5. Control panel
6. Front board
7. Window glass
8. Door glass
9. Handles with screw (x2)
10. Heater frame
11. Hinge
12. Top board
13. Ventilation
14. Backrest
15. Backboard
16. Right board
17. Bench
18. Bench front board
19. Footrest board
20. Bottom board
21. Bench support frame x2

Accessories

INSTALLATION

NOTICE:

• Please read the WARNING and ASSEMBLY TIPS section before installing the sauna.
• The figures and drawings are used for the assembly guide only, parts and accessories may not be consistent with your sauna.

1. Find a location to place the Bottom board [20], see ASSEMBLY TIPS for details.

   • Then Attach the Front board [6] to the Bottom board by lining up the Front board with the edge in front of the Bottom board. (Fig 1)

2. There are two kinds of buckles during the whole installation, as shown. (Fig 2)

3. Attach the Right board [16] to the Front board by aligning the buckles and sliding the Right board down, locking it into place. (Fig 3)

4. Attach the Left board [4] to the Front board by aligning the buckles and sliding the Left board down, locking it into place. (Fig 4)

5. Attach the Backboard [15] to the Bottom board by aligning the buckles of the Left board and Right board, and sliding the Right board down, locking it into place. (Fig 5)

6. Slide the Bench front board [18] into the grooves on the Left and Right boards as shown (Fig 6), and connect the power cable as shown (Fig 7).

7. Place the Bench support frame [21] at the bottom of the Left board and Right board. (behind the Bench front board)

   • Fix two pieces of Bench support frame with self-tapping screws (4*30). (Fig 8).
   • Put the Bench [17] on the Bench support frame and push it forward to the board.

8. Lead the wires in the sauna to the top, Install the Top board [12] at the top of the sauna (Fig 9), and let wires through the groove of the Top board.

9. Every connection cable or plug has a corresponding pair, find male and female with the same label (like “Control”), and plugs incorrectly.

10. Find the “12V output” wire from Control Box [3], through the hole on the Backboard, and connect the Oxygen Ionizer (independent parts), then use an Electric drill to fix the Oxygen ionizer on the Backboard with self-tapping screws (3*25).
    (Fig 11)

11. There are some holes at the edges around the Top board, use Self-tapping screws (5*50) to fix the Top board. (Fig 12)

12. Put the Duster cover [1] on the Top board, then fix the Duster cover with self-tapping screws (3*25) at the four corners. (Fig 13)

    • NOTICE: If the duster cover in the package comes in two pieces, you need to fix screws at the optional positions as shown.

13. Separate Handles [9] by unscrewing screws on the wooden handle. The wooden handle is for the inside of the Door glass [8], and the metal handle is for the outside.

    • Put both handles align with the holes in the Door glass, and fix the handle with screws at the wooden handle. (Fig 14)

14. Plug the main electrical cord into a dedicated outlet.

    • NOTICE: The power outlet should be dedicated to the sauna. Do not share it with other appliances.

INSTRUCTIONS FOR USE

Congratulations, the assembly of the sauna is now complete, Please review the instructions, warnings & suggestions before using it.

1. Display screen
2. Display temp, timer, and audio information.
3. Power button
4. Press this button to switch the sauna ON/OFF.
5. Light button
   • Light in the sauna:
   • Press the button to turn on/off the light in the sauna.
   • Color light adjust:
   • Press the button 5s, display shows “2N”.
   • Short press the “LIGHT ”button to change the color of the  LED light. (L0-shade, L1-all bright, L2-17 different colors). ( 2 ) Press on TEMP+, control LED 1 ON/OFF (if available).
   • Press on TEMP-, control LED 2 ON/OFF (if available).
   • Press on TIME+/TIME-, control RGB Light and LED ON/OFF.( 5 ) No operation for 8s quits the light adjust mode.
6. Music button
   • Press to adjust the audio status.
   • In audio status, press the audio button to switch the audio source.
   • No operation for 8s quits the audio adjust mode.
   • Bluetooth:
   • The display shows a Bluetooth icon. Use devices that support Bluetooth audio playback(e.g. smartphone), find the Bluetooth device called “Steam Spa”, and click to connect.
   • NOTE: During Bluetooth match, cannot switch audio source or turn ON/OFF another function.
   • USB drive:
   • The display shows a music icon.
   • FM Radio:
   • The display shows the radio icon and frequency.
   • OFF: Audio function will turn off.
7. USB port
   • Plug in the USB drive, and use the Audio function to play the music on the USB disk.
   • NOTICE: The partition format of the USB drive requires FAT32.
   • MP3 audio should be placed in the root directory.
8. Song selection function
   • In Bluetooth or USB state, Press the previous or next button to switch to previous or next music.
   • In the FM Radio state, Press the previous or next button to adjust the frequency. (85.7-108.0Mhz)
9. Temp control
   • Press “-” and “+” to adjust the heater temperature.
   • The temperature range is 77-149°F [ 25-65°C ], press one adjusts 1°F [ 1°C ], long press can adjust the temp quickly.
   • Celsius/Fahrenheit display switch: Press “-” and “+” for 5S.
10. Time control
    • Touch the “+” and “-” buttons to set the timer (5-90 Minutes).
11. Pause/Play
    • In Bluetooth or USB state, press to play music.
    • In the FM radio state, press for 5 seconds, will search FM station automatically.
12. Volume control
    • Press ‘+’and ‘-‘ to adjust the volume.

INSTRUCTIONS FOR USE

Oxygen ionizer

1. Press the ion button to turn the ON/OFF ion function.
2. Press the ozone button to turn the ON/OFF ozone function.

Tips

1. The speaker is on the bottom of the Top board, the audio quality is even better in the sauna.
2. The control box may be hot during the sauna session, do not cover it.
3. The ceiling vent can be adjusted in the sauna.
4. When activated, the ozone/ionizer may produce a distinct odor.

SUGGESTIONS

Before using

1. Please be sure to follow the instruction manual before operations.
2. A hot shower or bath before the start of your sauna session will help promote perspiration.

During using

1. STAY HYDRATED! Remember to drink plenty of water before, during, and after your sauna.
2. A normal sauna session should last 30 minutes or less.
3. Perspiration will begin within 15-25 minutes.
4. Open the ceiling vent or door to allow fresh air into the sauna.

After use

1. Always remember to unplug your sauna after each use.
2. Open the door to let the heat and humid water vapor dissipate and keep the sauna cabin dry.
3. Make sure to wipe any sweat from the sauna walls and surfaces. We recommend using a towel.

Clean wood parts

1. Use a wrung wet towel to wipe down the cabin’s outer and inner surfaces. Additionally, we recommend running a small vacuum cleaner on the inner surfaces.
2. Avoid the use of any organic-based cleaners such as gasoline or alcohol on the sauna’s wooden surfaces.
3. Avoid using any sharp or abrasive materials to prevent scratching the wooden surfaces.

Cleaning glass parts

1. Use soft materials to wipe the glass such as a micro-fiber washcloth.
2. Stubborn stains can be wiped with a damp cloth, and then dry with a dry cloth.
3. Void using any sharp or abrasive materials to prevent scratching the glass surfaces.

Transportation and storage

1. Avoid water, snow, and intense impact during transportation.
2. Do not store it in a humid environment.
3. The northern climate is relatively dry, so keep the wood parts humid, for example, wipe the product with a wrung wet towel.

TROUBLESHOOTING

The indicator light is broken.
The indicator light is not working.| The circuit board or components are broken.| Contact SteamSpa service.
The temperature sensor is broken.
The infrared Heater not heating up.| The heater is broken.| Contact SteamSpa service to replace the heater.
The wire junction or the heater’s wire is loosened.| Check and tighten the connection.
The temperature sensor is broken.| Contact SteamSpa service.
Odor from the sauna.| The circuit‘s problem, or foreign matter is heating.| 1) If There is foreign matter around, remove it.

2. If The heater is overheated or some parts are damaged, cut off the power supply, contact SteamSpa service.

format of the USB drive is FAT32, or change to another USB drive.
Bluetooth device connection failed.| Change to another Bluetooth audio device.
FM signal strength is not good.| Try to adjust the location of the sauna.
The light is not working.| The wire is not well connected.| Check the connecting wire.
The light is damaged.| Contact SteamSpa service.

Steam Spa PHONE:305-614-4070 FAX: 866-560-1060 http://steamspa.com info@steamspa.com

References

• Register | SWCORP

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>