Sagitar 2BDNRST ST Bluetooth Headset Instructions
- June 14, 2024
- Sagitar
Table of Contents
Sagitar 2BDNRST ST Bluetooth Headset
- Specifications:
- True Wireless Stereo (TWS) Independent left and right channels High fidelity sound IEFT and Bluetooth compatible
- Bluetooth version: Hvorson V5.3+EDR (both sides) IT, ultra-low power consumption
- Bluetooth mode: A2DP1.3/HFP1.6/HSP1.2/AVRCP1.6/D11.3
- Bluetooth frequency: 2.4 GHz
- Bluetooth range: 8-15 meters
- Battery capacity: 3mAh rechargeable polyethylene lithium batteries on both sides
- Call/playback time: exceeding 15mdh Tilt time: approximately 2-4 hours
- Charging voltage of the charging box: 5V
The charging box can charge the headphones more than three times
Product Usage Instructions
- Step 1: Charging the Headphones
- Connect the charging box to a power source using the provided USB cable.
- Place the headphones into the charging slots in the charging box.
- The red light on the charging box will indicate that the headphones are being charged.
- Wait until the headphones are fully charged before proceeding to the next step.
- Step 2: Pairing the Headphones
- Make sure the headphones are charged and removed from the charging box.
- Turn on the Bluetooth on your device (e.g., smartphone, tablet, etc.).
- Search for available Bluetooth devices and select the appropriate device name for the headphones.
- If prompted, enter the pairing code or accept the pairing request on your device to complete the pairing process.
- Once paired, you can use the headphones wirelessly with your device.
- Step 3: Using the Headphones
- Once the headphones are paired and connected to your device, you can use them for various purposes:
- To listen to music: Play music on your device, and the audio will be transmitted to the headphones wirelessly.
- To make/receive calls: When receiving a call, you can answer it by pressing the button on the headphones. To end a call, press the button again.
- To control playback: Use the buttons on the headphones to play/pause music, skip tracks, adjust volume, etc.
- FAQ:
- Q: How long does the battery last?
- The battery capacity allows for approximately 2-4 hours of headphone playback time.
- Q: Can I use only one headphone at a time?
- Yes, the headphones can be used alone or in pairs. You can use one headphone for mono audio or both headphones for stereo sound.
- Q: How far can I be from my device and still maintain a Bluetooth connection?
- The Bluetooth range is approximately 8-15 meters. However, the actual range may vary depending on environmental factors.
- Q: How many times can the charging box charge the headphones?
- The charging box can charge the headphones more than three times before needing to be recharged itself.
Specifications
True Wireless Stereo (TWS). The true wireless design features independent left and right channels, high fidelity sound, IEFT, and Bluetooth compatible right headphones, which can be used alone or in pairs
Bluetooth version Hvorson| V5.3+EDR (both sides) IT, ultra-low power
consumption
---|---
Bluetooth mode:| A2DP1.3/HFP1.6/HSP1.2/AVRCP1.6/D11.3.
Bluetooth frequency:| 2.4 GHz
Bluetooth range:| 8-15 meters
Battery capacity:| 3mAh rechargeable polyethylene lithium batteries on both
sides. Battery capacity exceeding 15mdh, red
Call/playback time:| Headphone playback time (82-4 hours) Headphone playback
time is approximately 2-4 hours
Tilt time:| six hours Double Ear Defamation
Instructions U sing Headphones
Special steps and instructions for using headphones
- Turn on the charging box switch (the charging box indicator light is on)
- Open the charger cover and remove the headphones. (Important note: Before opening the charging box, first turn on the charging box switch, and the headphones need to beautomatically turned on)
- Pairing with other devices: Turn on Bluetooth settings on your phone or other device. Find the Bluetooth name and click ‘Connect Bluetooth’.
- Place the headphones into the charging box, activate the charging mode, and the headphones will automatically turn off
- Wireless headphones can be connected separately or with other Bluetooth devices If the wireless headset is not connected to the Bluetooth device within five minutes, it will automatically turn off.
Headphone touch function description:
- Touch the main and auxiliary earphones to answer a call once, and after touching twice, the volume of the earphones decreases.
- If you touch the malt earphones twice and then press a song on the main ear three times, the volume will increase. Old ears can press a song three times, long press Siri for a few seconds, and long press Siri for 5 seconds.
- Turn off the phone and turn it on, and the headphones will automatically connect to the phone
- The headphones are for dual channel calls, with sound in the left and right ears
- Charging time 60-90 minutes
- Wireless headphones can be connected separately or with other Bluetooth devices
- If the wireless headset is not connected to the Bluetooth device within five minutes, it will turn off automatically.
- The charging volt age of the charging box is 5V;
- The charging box can charge the headphones more than three times
- When charging the headphones, the red light lights up,
- When the charging box is used to charge the headphones, the photoelectric finger light will light up
FCC
FCC Warnning:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, thereis no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cmbetween the radiator and your body.