V-TAC VT-61024 Led Backlit Recessed Panel Instruction Manual
- August 9, 2024
- V TAC
Table of Contents
V-TAC VT-61024 Led Backlit Recessed Panel
TECHNICAL DATA
MODEL| SKU| SHAPE| WATTS| LUMENS| BEAM
ANGLE| IP RATING| CRI| BODY TYPE| TOTAL
CURRENT| INPUT POWER| LIFE SPAN| ON/OFF CYCLE|
DIMENSION (LxWxH)
---|---|---|---|---|---|---|---|---|---|---|---|---|---
VT-61003
| 7855 10477
7856 10478
7857 10479
| ROUND| ****
3W
| ****
330LM
| ****
Sphere 360°
| ****
IP20
| ****
80
| ****
PLASTIC
| ****
26mA
| ****
AC:220-240 50/60Hz
| ****
20000H
| ****
15000
| φ90.5x28mm
SQUARE| 90.2×90.2×28.2mm
VT-61006
| 7858 10480
7859 10481
7860 10482
| ROUND| ****
6W
| ****
660LM
| ****
Sphere 360°
| ****
IP20
| ****
80
| ****
PLASTIC
| ****
36mA
| ****
AC:220-240 50/60Hz
| ****
20000H
| ****
15000
| φ120.5×28.4mm
SQUARE| 120.5×120.5×28.4mm
VT-61012
| 7861 10483
7862 10484
7863 10485
| ROUND| ****
12W
| ****
1200LM
| ****
Sphere 360°
| ****
IP20
| ****
80
| ****
PLASTIC
| ****
71mA
| ****
AC:220-240 50/60Hz
| ****
20000H
| ****
15000
| φ170.8×28.4mm
SQUARE| 170.8×170.8×28.4mm
VT-61018
| 7864 10486
7865 10487
7866 10488
| ROUND| ****
18W
| 1850LM| ****
Sphere 360°
| ****
IP20
| ****
80
| ****
PLASTIC
| ****
103mA
| ****
AC:220-240 50/60Hz
| ****
20000H
| ****
15000
| φ220.8×28.9mm
SQUARE| 1980LM| 220.4×220.4×28.8mm
VT-61024
| 7867 10489
7868 10490
7869 10491
| ROUND| ****
24W
| 2500LM| Sphere 360°| ****
IP20
| ****
80
| ****
PLASTIC
| ****
160mA
| AC:220-240 50/60Hz| ****
20000H
| ****
15000
| φ296×29.1mm
SQUARE| 2640LM| 295x295x28.6mm
‘This product contains a light source of energy efficiency class <F/E>’, where <F/E> shall be replaced by the energy efficiency class of the contained light source.
INTRODUCTION & WARRANTY
Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instruc-tions carefully before starting the installation and keep this manual handy for future reference. If you have any another query, please contact our dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at the best. The warranty is valid for 2 years from the date of purchase. The warranty does not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no warranty against damage to any surface due to incorrect removal and installation of the product. The products are suitable for 10-12 Hours Daily operation. Usage of product for 24 Hours a day would void the warranty. This product is warranted for manufacturing defects only.
WARNING
- Please make sure to turn off the power before starting the installation.
- Installation must be performed by a certified person.
- The light source of this luminaire is not replaceable, when the light source reaches its end of life the whole luminaire should be replaced.
- For Indoor use only
- If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard.
- Method of attachment of the cable or cord such that any replacement can only be made by the manufacturer, his service agent or similar qualifed person.
MULTI-LANGUAGE MANUAL QR CODE
Please scan the QR code to access the manual in multiple languages.
ATTENTION!
Do not look directly at LED light beam. Product can only be supplied by rated
voltage or voltage within the range provided. It’s forbidden to use the
product with damaged protective cover. Product must not be used in unfavorable
conditions, e.g. dust, water, moisture, vibrations, explosive air atmosphere,
fumes, or chemical fumes, etc. In the area of strong electromagnetic
interference, the functioning of the product may be disrupted.
USAGE GUIDELINES/MAINTENANCE
Any maintenance work must be performed when the power supply is cut off and
the product has cooled down. Clean only with soft and dry cloths. Do not use
chemical detergents. Do not cover the product. Ensure free air access. Product
may heat up to a higher temperature.
MOUNTING
Read the manual before mounting. Mounting should be performed by a qualified
electrician. Exercise caution. Product has a protective contact /terminal.
Failure to connect the protective lead may lead to electric shock. Mounting
diagram: see pictures. Check for proper mechanical fastening and connection to
electrical power prior to first use.
RECESSED PANEL INSTALLATION DIAGRAM
-
Cut a hole using an appropriate tool according to the cut-out size.
-
Switch OFF the power & Connect AC: 220-240V voltage with terminals.`
-
Hold the two clips back against the panel light and push it into the hole. Allow the springs to pull the light up to the ceiling.
-
Check whether the lamp is flat and electrified.
-
Clean the lamp with clean cloth.
-
Switch on the power and test the light.
-
Cut a hole using an appropriate tool according to the cut-out size.
-
Switch OFF the power & Connect AC: 220-240V voltage with terminals.`
-
Hold the two clips back against the panel light and push it into the hole. Allow the springs to pull the light up to the ceiling.
-
Check whether the lamp is flat and electrified.
-
Clean the lamp with clean cloth.
-
Switch on the power and test the light.
DISASSEMBLY DIAGRAM
(For Market surveillance team only)
- Power off, tap the central area of the diffusion plate with a pointed tool, and take out the cracked diffusion plate.
- Remove the power wire from the plug terminal.
- If there is no hot melt column in the lamp body or the hot melt column is not hot melt, this step will be adjusted without treatment. If the hot-melt column has been fused to fix the aluminum substrate, cut the hot-melt part of the hot-melt point with diagonal pliers.
- Press the buckle outwards, remove the aluminum substrate pressing strip from the bayonet, and remove the pressing strip. This step is only required for 24W panel light, other items are not required.
- Press the buckle outwards, remove the aluminum substrate from the buckle, and remove the light source board.
- Take out two-cord cable (wire diameter 18-22AWG) and insert it into the plug-in terminal. Connect the external power supply for testing.
IN CASE OF ANY QUERY/ISSUE WITH THE PRODUCT, PLEASE REACH OUT TO US AT: SUPPORT@V-TAC.EU FOR MORE PRODUCTS RANGE, INQUIRY PLEASE CONTACT OUR DISTRIBUTOR OR NEAREST DEALERS. V-TAC EUROPE LTD. BULGARIA, PLOVDIV 4000, BUL.L.KARAVELOW 9B