BRIGHTLIGHT 3 Circuit 1-10V, DALI Track System Installation Guide
- August 8, 2024
- brightlight
Table of Contents
BRIGHTLIGHT 3 Circuit 1-10V, DALI Track System
Product Information
Specifications
- 3-Circuit (1-10V / DALI) Track System
- Surface Mounted and Recessed options available
- Various components for customization
- Electrical, mechanical, and thermal compatibility must be ensured
- Contact Bright Light for technical support
Product Usage Instructions
Installation Guide
When installing the 3-Circuit Track System, follow these steps:
- Ensure you are using components belonging to this track system only.
- Mount the track system according to the provided instructions for either surface mounted or recessed installation.
- Test all connections and electrical lines before attaching any fixtures.
- Check for electrical, mechanical, and thermal compatibility with attached fixtures.
Safety Precautions
For safety reasons, please note the following:
- Do not use components not belonging to this system.
- Ensure proper installation according to the instructions provided.
- Contact the manufacturer for any technical queries or support.
FAQ
-
Q: Can components from other track systems be used with this product?
A: No, only components belonging to this specific track system should be used to ensure safety and functionality. -
Q: How should I test the connections before attaching fixtures?
A: Use a multimeter or consult an electrician to ensure all connections are properly established and functioning. -
Q: Are there any specific maintenance requirements for this system?
A: Regularly check for loose connections, dust accumulation, and signs of wear to maintain optimal performance.
OTHER MODELS
NOTE:
- Only components belonging to this track system should be used, and the components must be installed according to these installation instructions.
- Bright Light is not responsible for the safety and function of this system if components not belonging to this system are used, or if the installation instructions are not followed.
- It is the user’s responsibility to ensure the electrical, mechanical, and thermal compatibility between the system and the fixtures attached to it.
- The user must test all connections and electrical lines before attaching luminaires or other features to the system.
MOUNTING ACCESSORIES
CONNECTION
INSTALLATION
0800 952 000 | www.brightlight.co.nz | BRIGHTLIGHT
Actual product characteristics may vary. Bright Light reserves the right to improve, modify or update the product designs without prior notice.