soundcore Boom 2 Outdoor Speaker User Guide

Soundcore Boom 2 Outdoor Speaker

USER GUIDE

MODEL: A3138

At a Glance

Charging

Charging Your Speaker

Use a certifi ed USB-C cable and charger to prevent any damage.

Charging External Devices

Use this speaker as a power bank to charge your portable devices or accessories.

Powering On / Off

• This speaker will automatically power off after 20 minutes of no audio input.
• You can also set an auto-power-off time in the soundcore APP.

Using Your Speaker

Bluetooth Mode

Press the Bluetooth button to enter Bluetooth pairing mode, then select “soundcore Boom 2 ” from the Bluetooth list to connect.

• To re-enter Bluetooth pairing mode, press the Bluetooth button once.
• This speaker can only play music on one mobile device at a time. To play from another connected device, pause the device that’s currently activefi rst.
• Each time you power on your speaker, it will automatically connect to your last connected device if available within the Bluetooth range. If not,press the Bluetooth button to enter Bluetooth pairing mode.

TWS (True Wireless Stereo) Mode

Two identical soundcore speakers can pair with each other for stereo sound. Both speakers can play the same audio (one as the left channel and the other asthe right channel).

With one speaker connected to a smartphone, press and hold the Bluetooth button for 2 seconds on two speakers to enter TWS pairing mode.

To exit TWS mode, press and hold the Bluetooth button for at least 2 seconds.

PartyCast Mode

With one speaker connected to a smartphone, press the PartyCast button on up to 100 soundcore speakers with PartyCast function to synchronize audio andlight.

soundcore speakers with PartyCast function can also be connected with this speaker.

Light Modes

The LED lights at both sides change with the rhythm of the music. Check all available light modes in the soundcore app.

Button Controls

Soundcore App

Download the soundcore app to enhance your experience.

Product information:

Check the product name and software version, or read the user manual.

Firmware update:
You will be informed once a new version of fi rmware is detected when you connect the speaker with the app.

Battery status:
Indicates the remaining battery level of your speaker.

Volume control:
Adjust the volume level via the app without pressing the buttons on the speaker.

EQ settings:
There are various preset EQ settings you can choose from in the app to optimize your experience while enjoying different music genres.

Soundcore Signature:
Standard EQ mode optimized for well-balanced sound

Voice:
Voices stand out more clearly from other ambient sounds.

Balance:
No enhancement for high-frequency and low-frequency sounds.

Treble Boost:
High frequencies are enhanced.

Set auto-power-off time:
Set an auto-power-off time. The speaker will automatically power off when the time is up.

Voice prompt:
Mute or restore the voice prompt while powering on/off.

Reset
Press and hold the Bluetooth button and volume up button simultaneously for at least 4 seconds to reset the speaker.

Specifications

FAQ:

Q: Can I connect multiple devices to the speaker simultaneously?

A: No, the speaker can only play music from one mobile device at a time. To switch devices, pause the currently active device first.

Q: How do I exit TWS (True Wireless Stereo) mode?

A: Press and hold the Bluetooth button on one of the paired speakers for at least 2 seconds to exit TWS mode.

Q: What is PartyCast mode?

A: PartyCast mode allows you to synchronize audio and light effects across multiple soundcore speakers with PartyCast function for a unified experience.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>