Torin Jacks 22 Piece Professional Garage Classic Series Cabinet Set Owner’s Manual

**Torin Jacks 22 Piece Professional Garage Classic Series Cabinet Set Owner’s Manual

**

Important

When you open the cartons, carefully check the contents and make sure there is no damage. If you have any problems or you find any parts damaged or missing, Please contact with us first.
Do not return the product to the store before contacting us. Do not dispose of your cartons until you are completely satisfied with your products.
To reduce the risk of injury, the user should read and understand this owner’s manual before assembling and using these products for the first time.
Fill in the following information and retain this manual for future reference:

Item No.
Date of Purchase ____
Place of Purchase ____
Receipt No

Safety Guidelines

Use two or more people to move, assemble, and install the product to avoid any injury.
DO NOT leave children unattended near the product.
DO NOT stand on the product or lean on the drawers or worktop.
WEAR SAFETY GLASSES when removing or repositioning the slides. The tools could slip, which may cause personal injury.
DO NOT alter the product in any manner. For example, do not weld external lock bars or attach unapproved electrical equipment. This may cause product damage, personal injury, or death.
DO NOT OVERLOAD PRODUCTS! The components of the product are designed to carry the following maximum weight capacities:

Cabinet| Shelf Weight Capacity (lbs.)| Drawer Weight
Capacity (lbs.)| Bottom Weight
Capacity (lbs.)| Top WeightCapacity (lbs.)| Overall Weight Capacity (lbs.)
---|---|---|---|---|---
Locker| 150| /| 220| 150| 820
Wall cabinet| /| /| 50| /| 50
1-drawer 2-door cabinet| 150| 100×1| 150| 220| 620
4-drawer roller cabinet| /| 70×4| /| 100| 380
71in workbench| /| /| /| 800| 800

BE CAREFUL when opening more than one drawer. The product could become unstable and tip, which may cause product damage or personal injury.
High risk of tipping if the product is not installed correctly. Securely attach the product to the wall to avoid serious injury.

Unpacking

1. Start by placing the package on flat covered ground.
2. Remove all cardboard, honey comb board, foam packaging material and clear plastic bags.
3. Recycle all packaging materials.
4. Verify all the contents are included and gather the tools required.

Hardware Included

No.

| DESCRIPTION| WALL CABINETx2| LOCKERx2| 1-DRAWER CABINETx2| 4-DRAWERR. CABINET x1| PEGBOARDx 10| BRACKET x0 12#
---|---|---|---|---|---|---|---
1| M6 Hex Flange Nut| 8| 4| 4| 0| 0| 0
2| Flat Washer| 4| 4| 2| 0| 4| 0
3| Key| 0| 2| 2| 2| 0| 0
4| M5 x 50 Hex Tapping Bolt| 4| 4| 2| 0| 4| 0
5| M6 x 12 Flat-Head Bolt| 8| 16| 24| 0| 0| 0
6| M5 x 12 Flat-Head Bolt(on the door)| 2| 4| 6| 8| 0| **** 0
7| Adjustable Leveling Feet| 0| 4| 4| 0| 0| 0
8| Shelf| 0| 3| 1| 0| 0| 0
9| Casters| 0| 0| 0| 4| 0| 0
10| M8 x 20 Hex Flange Bolt| 0| 0| 0| 16| 0| 0
11| Handle| 1| 2| 3| 4| 0| 0

Tools Required

• Adjustable Wrench

• 12”Magnetic Leveler

• Stud Finder

• Tape Measure

• Set Square

• Pencil

• 6 mm Phillips Screwdriver

• 5 mm Slotted Screwdriver

• Cordless Power Drill

• Locker x2
  

• Wall cabinet x2
  

• Shelf to connect the wall cabinets x4 **

**

• 1-drawer cabinet x2
  

• **4-drawer roller cabinet x 1

**

• 7 1in workbench x 1
  

• Pegboard x 10
  

Installing the Handles

Unscrew the bolts on the front of the drawers or the doors using a Phillips screw driver to remove the handle on the back of it, then attach the handle to the front of the door or the drawer using two M5x12 flat head bolts. Repeat for all the doors and drawers.

No. 6 x 2 each
M5 x 12mm Bolt

No. 11
Handle

Installing the Casters

1. Securely locked all the drawers of the rolling cabinet.
2. Lay the rolling cabinet upside down. Use the packaging material to protect the finish.
3. Mount the two swivel casters with brake to the front of the rolling cabinet using four M8x20 mm bolts per caster.
4. Mount the two regular casters to the other side of the rolling cabinet using four M8x20 mm bolts per caster.
5. Tighten all bolts with a wrench.
6. Return the rolling cabinet to its upright position.

No. 9 x 4
Casters

No. 10 x 16
M8 x 20mm Hex
Flange Bolt

Installing the Feet

Carefully set the locker on its back, then attach the adjustable leveling feet to the locker using sixteen M6x12 flat-head bolts with a Philips screw driver.

No. 5 x 16
M6 x 12mm
Flat-Head Bolt

No. 7 x 4
Adjustable Leveling
Feet

Installing the Shelves

Check the location need, carefully put the shelf into the slot .
Please make sure the shelf is stable.
NOTE: A center shelf must be installed level with the lock on the cabinet door in order for lock to work.

No. 8
Shelf

Installing the Worktop

Open the doors or remove the drawers to make sure that you have enough space to install the worktop.

Carefully place the wood worktop on the cabinets and fasten it with screw driver or cordless power drill and four screws in the parts package of each bottom cabinet. If there is no bottom cabinet on one side, connect the worktop with a bracket to the side of the locker with four screws and two nuts.

No. 12 x 1
Bracket

No. 1 x 2
M6 Nut

No. 5 x 4
M6 x 12 Flat-head
bolt

Setup

1. Planning the position of the cabinets, position the locker and 1-drawer cabinet.

2. Align the pegboard and screw them onto the wall.

No. 2 x 4 each
Flat Washer

No. 4 x 4 each
M5 x 50mm Hex
Tapping Bolt

3. Connect the two wall cabinets with the shelves

No. 1 x 16
M6 Hex Flange NutNo. 5 x 16
M6 x 12mm
Flat-Head Bolt

Open the door of the wall cabinet, connect the wall cabinet assembly to the wall. Two or more person is recommended for this step.

No. 2 x 8
Flat WasherNo. 4 x 8
M5 x 50mm Hex
Tapping Bolt

4. Roll the tool cabinet under the workbench. Open the door of the locker and securely attach the locker on the wall to prevent it from tipping.

No. 2 x 4
Flat WasherNo. 4 x 4
M5 x 50mm Hex
Tapping Bolt

Fasten all the bolts. The installation of the garage cabinet set is finished.

Operation

Drawer Removal

Put the drawer out so that it’s almost fully extended. Push up on the black release lever on one side, while pulling down on the black release lever on the other side. While holding the levers in the positions as illustred below, pull the drawer outward until it is released from the drawer slide.

Push up one side

Push down the other side

Drawer replacement

Extend the drawer slides from the cabinet. Insert the backets on each side of the drawer into the slots in the slides, being carefull to position them properly. Once instead, close the drawer completely to sent the slides in their proper positions.

Maintenance

1. Lubricate the slides twice a year with a quality lubricant. This is especially necessary when the temperature drops, which may cause the bearings to be stiff.
2. Periodically clean the drawers fronts, doors, handles and other surfaces with mild and water
3. For safety, use a non flammable cleaning fluid. Grease and oil can be removed with most standard cleaning fluids.

Distributed by :
TORIN INC.
Ontario, CA 91761
FOR CUSTOMER SERVICE
PARA EL SERVICIO PARA EL
www.torin-usa.com/support
Made in China / Hecho en China
www.torin-usa.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>