TORIN JACKS AT43002ABR-AU Ton Double Locking Jack Stands Owner’s Manual
- June 29, 2024
- Torin Jacks
Table of Contents
TORIN JACKS AT43002ABR-AU Ton Double Locking Jack Stands
Specifications
| Capacity | Lifting Range |
|---|---|
| 2 Ton | 10-13/16 ~ 16-1/2 inches |
| 3 Ton | 11-1/4 ~ 16-3/4 inches |
| 6 Ton | 15-1/2 ~ 23-3/8 inches |
| 12 Ton | 18-5/16 ~ 28-1/8 inches |
Product Usage Instructions
- Be sure to bend the bar after inserting the ratchet into the frame to prevent detachment.
- Place the jack stands on hard level ground.
- Adjust the height by pulling up on the ratchet.
- Place the load on the center of the saddle for safety.
- Do not remove the lifting means while jack stands are supporting the vehicle.
- Secure the ratchet by turning the stopper to hold the load securely.
- When storing, release the stopper and let the ratchet glide down to the lowest position.
- Inspect before each use and do not use if any components are bent, broken, or cracked.
- Clean as needed, wipe with an oily cloth, and store in a dry area when not in use to prevent corrosion.
Frequently Asked Questions
Q: Can I use the jack stands on uneven surfaces?
A: It is strongly recommended to use the jack stands on hard-level ground for safety and stability.
Q: What should I do if I notice any damage to the jack stands?
A: Do not use the jack stands if any components are bent, broken, or cracked. It is important to ensure the equipment is in good condition before each use.
Q: How should I store the jack stands?
A: When storing the jack stands, release the stopper and let the ratchet glide down to the lowest position. Clean as needed, wipe with an oily cloth, and store in a dry area to prevent corrosion.
Q: Is it safe to adjust the height while there is a load on the jack
stands?
A: It is recommended to adjust the height before placing any load on the jack stands for safety reasons.
SPECIFICATIONS
| Capacity | Lifting Range |
|---|---|
| 2 Ton | 10-13/16 ~ 16-1/2 inches |
| 3 Ton | 11-1/4 ~ 16-3/4 inches |
| 6 Ton | 15 -1/2 ~ 23-3/8 inches |
| 12 Ton | 18-5/16 ~ 28-1/8 inches |
BEFORE USE
PLEASE READ THIS MANUAL CAREFULLY BEFORE USE
IMPORTANT:
Study, Understand, and follow all instructions failure to heed this warning may result in personal injury and/or property damage.
WARNING:
- Read-Study and understand all warning and operating instructions before use. DO NOT OVERLOAD these jack stands beyond their rated capacity. These jack stands are designed for use on hard-level surfaces only.
- Center load on a saddle before lifting. Use as a matched pair to support one end of a vehicle only. Stands are not to be used to simultaneously support both ends or one side of a vehicle. No alterations shall be made to this product.
- Failure to heed these warnings may result in damage to jack stands and/or failure resulting in personal injury or property damage. Inspect before each use. Only attachments and/or adapters supplied by the manufacturer shall be used.
OPERATING INSTRUCTION
- Be sure to bend the bar after inserting the ratchet into a frame to prevent the ratchet from detaching out of the frame.
- Put the jack stands on the hard-level ground
- Adjust the height by pulling up on the ratchet.
- Place load on the center of the saddle for safety it is strongly recommended that lifting means not be removed while jack stands are supporting the vehicle.
- Secure the ratchet by turning the stopper to hold the load. Make sure the stopper has been securely inserted.
- Release the stopper and let the ratchet glide down to the lowest position when storing the jack stand.
- Inspect before each use DO NOT USE IF BENT BROKEN OR CRACKED COMPONENTS ARE NOTED. Prevent corrosion. Clean as needed wipe with an oily cloth and keep in a dry area when not in use.
Visual inspection shall be performed before each use of the stand by checking abnormal conditions, such as cracked welds, leaks, and damaged, loose, or missing parts if a stand is believed to have been subjected to an abnormal load or shock inspection shall be made by an authorized repair facility. Equipment that appears damaged or worn or operates abnormally shall be removed from service until repair. Repair should be made by an authorized repair facility. The annual inspection of the stand is recommended and should be made by the manufacturer’s or supplier’s authorized repair facility to ensure that your stand is in optimum condition and that the stand has correct decals and safety labels specified by the manufacturer.
- Distributed by TORIN INC.
- FOR CUSTOMER SERVICE
- www.torin-usa.com/support
- www.torin-usa.com
- Made in China
Documents / Resources
|
TORIN JACKS AT43002ABR-AU Ton Double Locking Jack
Stands
[pdf] Owner's Manual
AT43002ABR-AU Ton Double Locking Jack Stands, AT43002ABR-AU, Ton Double
Locking Jack Stands, Locking Jack Stands, Jack Stands, Stands
---|---