SMART WATCH SW071 Connected Watch User Manual

SMART WATCH SW071 Connected Watch

Thanks for purchasing this product.
please make sure the battery is fully charged before using the watch for the first time

Note: Waterproof performance – The device is not suitable for diving or swimming in the sea; and not suitable for hot water baths, hot springs, saunas, etc

APP Download

Scan the QR code to download and install the APP.
Note: Downloading the APP on iPad or Tablet is not supported.
Compatible with iOS 9.0 & above and Android 5.0 & above.

If the watch’s firmware or the APP is not the latest version, it may affect the usage of the watch or the APP. Please update the watch’s firmware and the APP to the latest version.
Firmware Upgrade: [Cool Wear] → [Device] → [Firmware upgrade] → [upgrades].
APP Upgrade: [Cool Wear] → [Profile] → [About] → [update].

APP Connection

1. Turn on Bluetooth and GPS on your mobile phone. Ensure the watch is not paired with other phone
2. Connect the Device directly with Mobile APP：APP-[Cool Wear] → [Device] → [Add device] → Tap on the searched watch name to pair it. Do not connect watch with the phone’s Bluetooth directly

Mobile Phone Setting

Ensure that the permission of notifications of APP in your mobile
phone is turned on: [Mobile phone] → [Settings] → [Notifications] →
[Permissions] → [Cool Wear] Set all permissions to ON.

• Special Note 1 : For Apple phones with operating system above iOS 12, go to [Settings] → [Bluetooth] → [Device name] → tap → [Share system notifications] → Ensure it’s ON.
• Special Note 2 : If you open an application (WeChat/Skype/WhatsApp, etc.) both on your computer and mobile phone, then no notification message will be displayed on the watch.

Special Attention: Android phone will automatically clean up infrequently used APP, causing APP to be closed in the background. Please turn on the relevant permissions to ensure normal use.

Watch Functions

smart watch supports a variety of functions: multiple sport modes, weather information, watch face store, heart rate monitoring, sleep monitoring, blood oxygen saturation monitoring, find my phone, message notifications, and etc.

Function Descriptions

1. DND , setting, brightness , flash light ,bt call .

2. Screen locker , always on mode ,al voice control ,find phone in the home page, swipe from top to bottom

3. Voice assistant
   First please make sure the watch is connected to the App Cool wear, and turn on the watch audio bluetooth Then slide from top to bottom on the home page and tap the icon.
   Now you can control your phone’s voice assistant with voice commands from your watch.

4. Change Watch Face
   Method 1 : Long press on the home page, then slide to switch the watch face, click to select.
   Method 2: Customize the watch face and change the watch face via the APPs watch face store: [Cool Wear] → [Device] → [Watch faces] → [More] → [Select picture] → OK to download and change it with the new watch face (Do not leave the download interface until the download is 100% completed).

5. Step Counting: Activity data resets every day after 00:00, and you can check the history records in the APP

6. Heart Rate Monitoring : It measures your heart rate data. To measure your heart rate: Turn on the heart rate monitoring function, and after 2 seconds it will automatically measure the heart rate, then wait for about 10-20 seconds until the measurement is completed.
   Besides, if you need 24H automatic heart rate monitoring, you can also set this function in the APP: [Cool Wear] → [Device] → Turn on [Automatic heart rate detection].
   Notes:1 ) Ensure the sensor at the back of the watch slightly touches the skin and the wristband not too tight or too loose. 2) lf you need to measure the exercise heart rate, please go to the exercise mode for measurement.

7. Blood Oxygen Monitoring: It measures your blood oxygen saturation data. You can check the historical measurement results in the APP’s blood oxygen interface.

8. Sleep Monitoring: It records your sleep data, and you can check the history records in the APP (Default sleep monitoring period: 20:00pm-10:00am.)

9. Weather : You need to connect the watch and Cool Wear APP to get the weather information in your location. Moreover, you can go to [Cool Wear] → [Profile] → [Unit Setting] → [Temperature] to switch between ℃ and ℉.
   Note: The weather information displayed on the smart watch is obtained from a third-party weather service provider. If your smart phone and smart watch obtain weather data from different weather service providers, then the displayed weather information may also be different.
   

10. Calling function
    Step #1:After the Android phone connect to the watch by App for the first time successfully, wait for about 10 seconds, and the APP page will pop up an audio Bluetooth pairing request, just click to pair.
    After the Iphone connected to the watch via App successfully, it will automatically pair the audio Bluetooth of watch.
    Step #2: Audio Bluetooth→ Open.

Step #3: Notes:90s after a phone call, watch will automatically enter the “low power consumption mode”, the button will show grey , when the [incoming call notification] permission in the APP is turned on, it will be automatically activated when there is an incoming call.

Step #4 : after connect audio BT . user can click the right finger pointed icon to enter into dial page to dial phone out. or check contact list or check call history
Step #5 : Sync contact list .go to app, in telephone directory ,and click “ + ” to input the contacts user needs to call in daily life then it will sync to the watch contact list as long as app is connected.

11. Music Control: ( Connect watch with app and switch to music page) 1.watch can control the music playback on the phone and control volume 2.Play the music via the watch speaker : Connect the audio BT to phone setting→ go to the music interface , watch speaker shall play the music ,Please stay in the music interface, otherwise, after 90s, it will enter the power saving mode, If you want to play again, it needs to turn on the [Audio Bluetooth] manually again.

12. Multiple sport modes : Exercise data will be automatically synchronized to the APP when connected, and you can check the detailed data records in the sports mode in the APP.
    Notes: The watch does not built with GPS. But the GPS track function can be used in the Sport mode of app

13. Breathing Exercises: Follow the on-screen instructions for inhalation and exhalation (Breathing exercises help relax a person’s mood, reduce psychological stress and improve vital capacity).

14. Shutter (watch should be connected to the APP)
    Method 1 : In the APP: Go to [Cool Wear] → [Device] → [Easy camera], and click the shutter button to take a photo.
    Method 2 : On the watch: Click the shutter button on the watch’s interface to take a photo, or shake your arm to take a photo automatically.

15. Sedentary Reminder: Go to [Cool Wear] → [Device] → [Sedentary reminder] to enable/disable this function. If the watch detects no enough activities or steps during the set time period, the sedentary reminder function will be enabled, and the watch will then remind you every one hour.

16. Alarm Function: Go to [Cool Wear] → [Device] → [Alarm] to set alarms according to your needs. Up to 5 alarms can be set (The alarm will only give a reminder when the set time is more than 2 minutes).

17. Call Reminder : Go to [Cool Wear] → [Device] → [Call reminder] to enable/disable this function. After the call reminder function is enabled, then the watch can remind you of the incoming calls on your phone.
    Note: The watch cannot be used to answer calls or reply to messages.
    It can only display messages or reject the incoming call.

18. Wake Screen on Wrist Raise: Flip your arm, and the screen will automatically light up.

19. Message Notification: The watch can save the latest 5 messages.

20. Menu style change: the watch inbuild with 5 set of menu options.
    On the home page ,Slide to left to enter menu. and quick double press crown button to switch to another set of menu
    

21. Customize the main pages of Right Swipe : when we continuously swipe screen from left to the right ,it comes with sports activity ,heart rate ,sleep, weather and so on. the last page was a “+” ,which user can add the feature he wants to put

also when user want remove some of above feature page and replace with other feature page (widget) , user can long touch the screen center for 3 seconds ,it comes up with a delete icon .user can swipe and choose which feature (widget) to delete and press crown button to exit ,later user can again add new feature page in the section of “ +” and delete feature page by “–” icon

22. More : Calender ,Stop Watch , Countdown to enter from menu

Note : The watch is equipped with a charging cable. and it’s charging current watch can take is under 5V/1.5A

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>