Coast To Coast Zoo Catcher Owner’s Manual

August 7, 2024
Coast to Coast

**Coast To Coast Zoo Catcher Owner’s Manual

**

SETTING THE CLAW STRENGTH

First VR1: When the claw first picks up the prize in the down position.

Second VR2: When the claw reaches the up position and carries the prize to the prize drop point.

To set the claw strength do the following:

  1. Start a game by pressing the freeplay button
  2. During game play press the free play button to enter setup mode
  3. 0 1 should be flashing on the screen allowing you to adjust VR1
  4. Press the claw drop button on the control panel to change LED to 02
  5. Now you can adjust the VR2
  6. Press the freeplay button again to save the settings

*VR3 Not used

DIP SWITCH SETTINGS

DIP SW1: Not Used
DIP SW2
| 1=ON 0=OFF
---|---
FUNCTIONS / SWITCH| 1| 2| 3| 4| 5| 6| 7| 8
CLAW MOVES TO MIDDLE
AT BEGINING OF PLAY| YES| 1| | | | | | |
NO| 0| | | | | | |
DISPLAY| CREDIT| | 0| | | | | |
PLAY| | 1| | | | | |
DIP SW3| 1=ON 0=OFF
---|---
MODE / SWITCH POSITION| 1| 2| 3| 4| 5| 6| 7| 8
COIN MECH 1| 1 COIN 1 CREDIT| 0| | | | | | |
1 COIN 2 CREDITS| 1| | | | | | |
BILL ACCEPTOR| 1 PULSE 1 CREDIT| | | | | | | |
1 PULSE 2 CREDITS| | 1| | | | | |
4 CREDITS GET1 PLAY| NO| | | 0| | | | |
YES| | | 1| | | | |
CREDIT TO PLAY| 1 CREDIT 1 PLAY| | | | 0| 0| 0| |
2 CREDITS 1 PLAY| | | | 1| 0| 0| |
4 CREDITS 1 PLAY| | | | 0| 1| 0| |
8 CREDITS 1 PLAY| | | | 1| 1| 0| |
20 CREDITS 1 PLAY| | | | 0| 0| 1| |
28 CREDITS 1 PLAY| | | | 1| 0| 1| |
4 CREDITS 3 PLAYS| | | | 0| 1| 1| |
20 CREDITS 15 PLAYS| | | | 1| 1| 1| |
GAME TIME| 15 SEC| | | | | | | 0| 0
30 SEC| | | | | | | 1| 0
45 SEC| | | | | | | 0| 1
60 SEC| | | | | | | 1| 1
DIP SW4| 1=ON 0=OFF
---|---
MODE / SWITCH POSITION| 1| 2| 3| 4| 5| 6| 7| 8
COIN MEMORY| CLEAR| 1| | | | | | |
SAVE| 0| | | | | | |
HOME POSITION ISN’T THE SAME AS THE EXIT| | 0| | | | | |
HOME POSITION IS THE SAME AS THE EXIT| | 1| | | | | |
NOT USED| | | | | | | |
NOT USED| | | | | | | |
NOT USED| | | | | | | |
ATTRACT MODE
MUSIC| ON| | | | | | | |
OFF| | | | | | 1| |
SENSOR CHECK| OON ( TEST)| 1| | | | | | |
OFF ( OPEN)| | | | | | | 0|
PLAY UNTIL
YOU WIN OPTION| ON| | | | | | | | 0
OFF| | | | | | | | 1

PS1 ENTER SENSOR MODE: DISPLAY WILL SHOW ” 11″, PLEASE CHECK IF SENSOR CAN SENSE  WITH A STUFF. TURN OFF SWITCH BACK TO OPERATE AFTER CHECK

WIRING DIAGRAM

(A) J 1: D Type connector (TO CRANE) Look chart (3)

(B) J 2: Power connector

  1. : GND BLACK
  2. :+5 V  RED
  3. :+24 V  ORANGE
  4. :48 V  YELLOW
  5. : +48 V  GREEN
  6. :+12 V  BLUE

(C) J3 : Speaker, Sensor connector

  1. :+12V RED
  2. : GND BLACK
  3. : Sensor out WHITE
  4. : Sensor in BROWN
  5. : FREE PLAY ORANGE
  6. : Balancer BLACK 7: NC
  7. : NC
  8. : Speaker + GRAY
  9. : Speaker – PURPLE

(D) J 5 : Coin selector, Rotary motor control Counter connector

  1. : GND
  2. : GND
  3. : GND BLACK
  4. : Coin selector 1 signal
  5. : Coin selector 2 signal WHITE
  6. : Inhibit Coin Mech signal GREEN
  7. :
  8. : Coin selector 1 power + 12 V RED
  9. : Counter out BLUE
  10. : Counter in GREEN
  11. : Counter power + 12 V RED
  12. :

(E) J6: Direction ket

  1. : Key (get) BLUE
  2. : Key (down)
  3. : Key (left) YELLOW
  4. : Key (right) ORANGE
  5. : Key (back) RED
  6. : Key (foward) BROWN
  7. : GND BLACK

(F) J7 : Display connector

1| |
---|---|---
2| |
3| Prize Counter| YELLOW
4| ____Lamp of “catch”| BROWN
5| +12V| BLACK
6|
7
8
9
10
11
12
13| +5V|

(G) J 10 : Display connector

12 +5V RED
2 GND BLACK
3 PINK
4 WHITE
5 GRAY
6 PURPLE
7 BLUE
8 GREEN
9 YELLOW
10 ORANGE
COLOR DESCRIPTION
--- ---
BLACK 110 V 37
PURPLE BILLACCEPTOR 36
BLACK BUTTON LIGHT 35
BROWN GND 34
RED JOYSTICK 31
ORANGE JOYSTICK 30
YELLOW JOYSTICK 29
BLUE JOYSTICK 28
BLACK VR 27
BROWN VR 26
RED VR 25
ORANGE VR 24

BROWN
BLACK
BLUE| VOLTAGE METER-

VOLTAGE METER+

BILL ACCEPTOR

| 23

22

21

RED| 110 V| 20

19. 110 V G ND GREEN
18 ANTI SHAKER BLACK
17 ANTI SHAKER PURPLE
13 SPSP +12 V COIN? EMPTY
12 COIN 1 WHITE
11 GND BLACK
10 DISPLAY ORANGE
9 DISPLAY YELLOW
8 DISPLAY GREEN
7 DISPLAY BLUE
6 DISP LAY PURPLE

5
4

3
2

| DISPLAY
DISPLAY| GRAY
WHITE

PINK
BLACK

DISPLAY
DISPLAY
1| DISPLAY| RED

J1. 25 PIN CONNECTOR WIRE LIST

DESCRIPTION| FORWARD
MOTOR| LEFT OR
RIGHT
MOTOR| UP OR
DOWN
MOTOR| POWER
SUPPLY
FOR CLAM| FRONT
LIMIT
SWITCH| HOME
LIMIT
SWITCH| LEFT
LIMIT
SWITCH| TOP
LIMIT
SWITCH| BOTTOM
LIMIT
SWITCH
---|---|---|---|---|---|---|---|---|---
REFERENCE
NUMBER
| 1, 14| 2, 15| 3, 16| 4, 17| 5| 6| 8| 9| 10
Q’TY PER
ASSEMBLY
| 1| 1| 1| 1| 1| 1| 1| 1| 1

ERROR CODES

ERROR
NO
| CAUSING| SOLUTION
---|---|---
1| UP-AND-DOWN MOTOR| CHECK UP-AND DOWNMOTOR SWITCH
2| FORWARD-AND-BACK MOTOR| CHECK FORWARD-ANDBACK MOTOR SW
3| LEFT-AND-RIGHT MOTOR| CHECK LEFT-AND-RIGHT SW
4| COIN MECH 1| CHECK COIN MECH “NO”
SETTING
6| FORWARD-AND-BACK MOTOR| CHECK FORWARD-AND MOTOR SW
8| MAIN PCB RAM| CHANGE NEW RAM IC
11| SENSOR TEST MODE| EXIT TEST MODE
DIP7ONSW4
71| DROP BUTTON STUCK| CHECK / REPLACE BUTTON
*| CLAW NO FUNCTION| CHECK DC COIL OR FUSE
| |

COMPATIBLE WITH THE FOLLOWING CRANES:
TOY TAXI/ HOT STUFF / SWEET STUFF
DUCK/ZOO / DEEP SEA CATCHER
1.800.224.1717
1000 TOWBIN AVE. LAKEWOOD NJ 08701
https://coasttocoastcranes.com/

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals