ONBALNNCE MY Series Digital Mini Scale User Guide
- August 7, 2024
- ONBALNNCE
Table of Contents
ONBALNNCE MY Series Digital Mini Scale
Thanks for purchasing the MY Series Digital Mini Scale! This User Guide is
designed to get you up and running quickly with your scale. Scales are
precision instruments and require proper care and skill to get the best
results.
If you have questions or need support, visit us at
http://www.obscales.com/support or scan the QR Code on the back of this
manual using your smartphone.
What’s In The Box
Key Descriptions
– Turns the scale ON and OFF.
Also subtracts the weight of an empty container (see Tare Function).
M – Changes the weighing unit.
Weighing Your First Item
- Press the ON/OFF key to turn the scale on.
- Place the item on the centre of the weighing platform.
- Take your reading from the display. You can press the MODE key to convert between weighing units.
- The scale’s auto-off function will turn the scale off after 3 minutes of inactivity or you can press the ON/OFF key to turn the scale off.
Things To Avoid
Tare Function
The Tare function allows you to subtract the weight of a container so that the display only shows the weight of the contents.
- Place an empty tray or container on the platform.
- Press the ON/OFF key to subtract the container’s weight.
- Add items to the container to see their weight on the display.
NOTE: The weight of the container will subtract from the available capacity and will leave a negative value on the display once the weight is removed. Press ON/OFF again to return the display to zero.
Accuracy
Your scale comes calibrated from the factory and most users won’t need to
calibrate their scale for a long time. You should check your scale’s accuracy
periodically using calibration weights and perform calibration if necessary.
NOTE: Only use trusted calibration weights. Household items such as bottles and cans with weights printed on the side are not suitable for checking accuracy as these values are approximate and don’t include the container weight (Net Weight).
Calibration
Calibration adjustment is permanent and should only be performed using accurate calibration weights that match the requirements for your scale (see the chart on back). Do not use coins or other household items to calibrate.
- Prepare the required weight for your scale (see chart on back).
- Find a flat and level surface to perform calibration and let the scale adjust to room temperature.
- Press ON/OFF to turn the scale on and wait for the scale to stabilise.
- Press and hold the MODE key until the display shows ‘CAL’.
- Make sure nothing is on the platform then press MODE to confirm the zero point.
- The display will then flash the required calibration weight.
- Place the required calibration weight on the centre of the platform.
- The display will show ‘PASS’ then return to normal weighing mode. You may now turn the scale off or continue weighing.
SPECIFICATION
For more information, including weighing tips and support, scan this code with your smartphone Or visit us online at www.obscales.com/support/
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>