iWALK DBL4500C USB-C Portable Charger User Manual
- August 5, 2024
- iWALK
Table of Contents
iWALK DBL4500C USB-C Portable Charger
INTRODUCTION
The iWALK DBL4500C USB-C Portable Charger is a small and effective way to charge your devices while you’re on the go. This compact charger, which was made by iWALK, has a 4500mAh battery that will keep your devices charged all day. Being only 3 x 1.8 x 1 inches and weighing only 6.3 ounces, it’s small enough to fit in your pocket or bag and light enough to carry with you on trips. The DBL4500C, which costs $26.99 , is both affordable and useful. It has built-in USB-C connectivity, LED indicator lights, and improved safety features like short circuit protection. The iWALK DBL4500C is made to keep you connected, whether you are flying, commuting, or just need a backup power source you can count on. When iWALK, a well-known brand in compact power solutions, released this charger, they promised quality and ease of use.
SPECIFICATIONS
| Brand | iWALK |
|---|---|
| Connector Type | USB Type C |
| Battery Capacity | 4500 Milliamp Hours |
| Special Feature | LED Indicator Lights, Short Circuit Protection, Lightweight, |
Built-In USB-C, Pocket Size
Product Dimensions| 3 x 1.8 x 1 inches
Item Weight| 6.3 ounces
Item Model Number| DBL4500C
Batteries| 1 Lithium Polymer battery required
Manufacturer| iWALK
Price| $26.99
WHAT’S IN THE BOX
- Portable Charger
- Manual
FEATURES
- Pocket-Sized Design: It’s small and light, about the size of lipstick, so it’s very movable and easy to carry.
- High Capacity: The 4500mAh battery gives you enough power to charge your devices while you’re on the go
- USB-C Port: Works with many devices, such as the iPhone 15 series, iPad, AirPods, and Android phones from Samsung Galaxy S24 to LG and more.
- With the built-in USB-C port, you don’t need any extra cords to charge your phone.
- LED Indicator Lights: Soft LED lights show how charging is going and how much power is left, making it easy to see.
- When it comes to phone cases, it works with cases that are up to 1.7 inches thick.
- Safe Circuit Design: Protects against over-discharge, over-charge, short-circuit, and overload to make sure it is safe to use.
- It’s easy to carry around because it only weighs 6.3 ounces.
- Small: It’s only 3 x 1.8 x 1 inches, so it fits easily in pockets or small bags.
- Flexible Compatibility: It works with a lot of USB-C products, like the Nintendo Switch.
- Cover that is Easy to Remove and Replace: The connector cover is made to be simple to remove and replace.
- High-Quality Battery: It comes with a dependable Lithium Polymer battery that stores power efficiently.
- Fast Charging: Allows for quick and efficient charging of a number of devices.
- Stylish Design: It looks sleek and modern, so you can use it every day.
- Durable Construction: Made to last a long time even with normal wear and tear.
SETUP GUIDE
- The iWALK Portable Charger should be taken out of its package and checked for any damage.
- Initial Charging: Make sure the power bank is fully charged before using it for the first time to get the best performance.
- Check for Compatibility: Make sure your device has a USB-C port, or if it doesn’t, use the right adapter.
- Device Connecting: Use the built-in USB-C connector to connect your device instantly.
- Using the LED Indicator: Look at the LED lights to see how charged the battery is and what its state is.
- How to Charge the Power Bank: To charge the power bank, use a normal USB-C charger.
- Taking Off the Connector Cover: To get to the USB-C port, carefully take off the connector cover.
- Putting on the Cover for the Connector: To protect the connector, put the cover back on firmly after use.
- Check for Compatibility: If you’re using a phone case, make sure the power bank goes well with it.
- Overcharging can happen if you don’t stop the power bank when it’s fully charged.
- Charging a Device: To charge your device, connect it to the power bank and make sure the link is safe.
- Using in Different Situations: Make sure the charger works the same way every time by testing it in different situations.
- Where to Put the Power Bank: When not in use, keep the power bank in a dry, cool place.
- Checks Often: Make sure to check the power bank’s charge level often and charge it as needed.
- Last Use: Make sure all links are safe when you’re done using the power bank, then store it safely.
CARE & MAINTENANCE
- Regular Charging: To keep the battery healthy, keep the power bank charged.
- Don’t overcharge: When the battery is fully charged, unplug it to keep it from breaking down.
- Keep Dry: Make sure the power bank stays dry and doesn’t get wet.
- Carefully clean: Use a soft, dry cloth to wipe the outside. Do not use poisons or water.
- Protect the connection: After using the connection, always put the cover back on to keep dust and damage from getting in.
- How to Store: To get the most out of your batteries, keep them in a cool, dry place when not in use.
- Avoid Extreme Temperatures: Do not let the power bank get too hot or too cold.
- Check for Damage: Look at the power bank often for any signs of damage or wear.
- Use Compatible Chargers: To avoid problems, only use chargers and cables that are suggested.
- Avoid Physical Stress: Be gentle when handling the power bank to keep the inside from getting damaged.
- Charge Cycles: Try not to let the power bank die all the way before charging it again.
- Power Bank Use: To keep the power bank from getting too hot, don’t use it while it’s charged.
- Monitoring the temperature: If the power bank gets too hot, stop using it and let it cool down.
- Battery Health: Keep in mind that batteries may not work as well as they used to over time and with use.
TROUBLESHOOTING
| Issue | Possible Cause | Solution |
|---|---|---|
| The power bank not charging | Faulty charging cable | Use a different cable |
| The device not charging from the power bank | A low battery in power bank |
Recharge the power bank
LED indicator not working| Defective LED| Contact manufacturer for
repair/replacement
Slow charging| High power consumption by device| Turn off the device while
charging
Power bank overheating| Prolonged use| Allow the power bank to cool down
Cannot charge certain devices| Incompatible device| Check device compatibility
The power bank not turning on| Drained battery| Charge the power bank
Intermittent charging| Loose connection| Ensure a secure connection
Short battery life| Frequent full discharges| Avoid fully discharging the
power bank
Charging port damaged| Physical damage| Contact manufacturer for
repair/replacement
Battery swelling| Overcharging| Discontinue use and contact the manufacturer
The power bank shuts down unexpectedly| Internal circuit issue| Contact
manufacturer for repair/replacement
The charging cable not fitting properly| Obstruction in port| Clean the
charging port
Device not recognized| Firmware issue| Update device firmware
Power bank not holding charge| End of battery life| Replace the battery or the
power bank
USB-C connector not working| Debris in connector| Clean the USB-C connector
PROS & CONS
Pros:
- Compact and lightweight design
- Built-in USB-C connector
- LED indicator lights for battery status
- Short circuit protection
- Pocket-sized, perfect for travel
- 4500mAh battery capacity
- Easy to use
- Reliable performance
- Affordable pricing
- Durable construction
Cons:
- Limited to USB-C devices
- Lower battery capacity compared to larger power banks
- No wireless charging capability
- Limited color options
- Charging cable not included
FREQUENTLY ASKED QUESTIONS
What is the battery capacity of the iWALK DBL4500C Portable Charger?
The iWALK DBL4500C has a battery capacity of 4500 milliampere-hours (mAh).
What connector type does the iWALK DBL4500C Portable Charger use?
The iWALK DBL4500C features a USB Type-C connector.
What are the special features of the iWALK DBL4500C Portable Charger?
Special features include LED indicator lights, short circuit protection, a lightweight design, built-in USB-C, and a pocket-sized form factor.
What are the dimensions of the iWALK DBL4500C Portable Charger?
The dimensions are 3 x 1.8 x 1 inches.
How much does the iWALK DBL4500C Portable Charger weigh?
The iWALK DBL4500C weighs 6.3 ounces.
Who is the manufacturer of the iWALK DBL4500C Portable Charger?
The manufacturer is iWALK.
What is the price of the iWALK DBL4500C Portable Charger?
The iWALK DBL4500C Portable Charger is priced at $26.99.
How does the LED indicator on the iWALK DBL4500C Portable Charger function?
The LED indicator lights show the remaining battery level and charging status.
What type of battery does the iWALK DBL4500C Portable Charger use?
The charger uses a Lithium Polymer battery.
Why is my iWALK DBL4500C USB-C Portable Charger not charging my device?
Ensure that the iWALK DBL4500C USB-C Portable Charger is fully charged. Check the USB-C cable and ports for any damage. Try using a different cable or charging a different device to rule out issues with the cable or device.
What should I do if the iWALK DBL4500C USB-C Portable Charger is not holding a charge?
Verify if the iWALK DBL4500C USB-C Portable Charger has been fully charged initially. If it still doesn’t hold a charge, it might be a battery issue. Try charging it with a different adapter and cable. If the problem persists, the battery may need replacement or service.
Why does my iWALK DBL4500C USB-C Portable Charger charge devices slowly?
Check if you are using the original or a compatible high-quality charging cable and adapter. The iWALK DBL4500C USB-C Portable Charger might also be in a low-power mode or have a lower input power adapter connected.
How can I fix the iWALK DBL4500C USB-C Portable Charger if it won't turn on?
Ensure the iWALK DBL4500C USB-C Portable Charger has sufficient charge by connecting it to a power source. If it still won’t turn on, try resetting the power bank by pressing and holding the power button for 10-15 seconds, if applicable.
What should I do if my iWALK DBL4500C USB-C Portable Charger overheats?
Stop using the iWALK DBL4500C USB-C Portable Charger immediately and allow it to cool down. Overheating could be due to charging too many devices at once or using a damaged cable. Ensure proper ventilation and avoid charging in direct sunlight or hot environments.
Why are the LED indicators on my iWALK DBL4500C USB-C Portable Charger not working?
This could be due to a firmware glitch or a hardware issue. Try resetting the iWALK DBL4500C USB-C Portable Charger. If the problem persists, the LED indicators might be defective and require professional repair or replacement.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>