Pyle Jam Tunes Box Sports Speaker – Wireless Portable Rugged User Guide
- June 4, 2024
- Pyle
Table of Contents
Pyle Jam Tunes Box Sports Speaker – Wireless Portable Rugged
Specifications
- BRAND: Pyle
- MODEL NAME: Jam Tunes Box Sports Speaker
- CONNECTIVITY TECHNOLOGY: Bluetooth, Auxiliary, USB
- SPECIAL FEATURE: Wireless
- RECOMMENDED USES FOR PRODUCT: Music
- COMPATIBILITY: iPhone, android, smartphone, iPad, tablet, MP3 player, PC
- WIRELESS RANGE: 33 feet
- AUX JACK: 3.5 MM
- FREQUENCY RESPONSE: 60 – 20,000Hz
- IMPEDANCE: 4 ohm
- BATTERY: 400mA
- AVERAGE LIFE: 6 hour
- PRODUCT DIMENSIONS: 3 x 8 x 3.25 inches
- ITEM WEIGHT: 1 pounds
- BATTERIES: 1 Lithium Ion battery
Introduction
The Jam Tunes Box lets you listen to your favorite music wherever you are. Full range stereo sound quality is incorporated within a shockproof, rubberized, and long-lasting construction. With the Bluetooth wireless technology built into this speaker, you can quickly stream and play music from almost any Bluetooth-enabled device. All of your favorite Bluetooth devices are compatible with it (iPhone, Android, Smartphone, iPad, Tablet, PC, etc.) This speaker box can also be used as an external speaker for your audio device by connecting it to any 3.55 mm headphone port or AUX-output. Features for adding music everywhere, anytime include an integrated rechargeable battery, simple button controls, and outstanding sound quality.
HOW TO USE
- Press and hold the power button for three seconds to.
- Look at the battery’s charge level.
- Reduced volume / Previous track
- Play and pause; respond; and hang up.
HOW TO PAIR
- As most of you already know, the jam will only link with one device, thus you must disable the original device pairing.
- Next, press and hold the power button on the bottom of the Jam speaker for 5 seconds to turn it on.
- On your phone or tablet, such as an iPad or an iPhone, enable Bluetooth search.
HOW TO MAKE A SPEAKER LAST LONG
Your best options are a portable battery pack and quick charging capabilities. Shorter battery life can be compensated for by quick charging. This capability, which not all speakers have but is quite helpful nonetheless, may take a dead battery and resuscitate it for a sufficient length in a half-hour or less.
HOW TO TURN THE VOLUME UP
To activate and connect, hold for 1-2 seconds. For the volume up and down buttons, hold for 2-3 seconds before running them off once. Press the middle bar button quickly for play and pause.
HOW TO TURN OFF
Hold down the “X” and “play/pause” buttons simultaneously for 2 seconds to unplug the speaker from the device. C – BUTTON ACTIVITY To play your music, quickly push the “play/pause” button for 0.5 seconds. Press the “O” button briefly to raise the volume, and the “X” button to lower it.
Frequently Asked Questions
Can a jam speaker be used while charging?
No impact is made on the speaker’s performance by charging. There will be no problems with the sound quality of your speaker during operation. The speaker drains the battery while you charge it, which presents the sole difficulty.
How long does the battery in a jam speaker last?
On a single charge, the speaker can play music for 12 hours. Just consider that it only takes five hours to listen to all of your Led Zeppelin albums; therefore, this speaker should have no trouble entertaining guests on the patio or around a campfire.
How long does it take for jam speakers to charge?
For a complete charge, allow about 3 hours. The provided USB to Micro USB wire can be used to charge the device via a computer or an AC adapter with a USB connector (not included). Note: When linked wirelessly, the battery may last up to four hours, and when connected via an Aux-In Audio Jack, it can last up to twelve hours.
How can I tell when the battery in my jam Bluetooth speaker is full?
In roughly four hours*1, charging is finished, and the indicator turns off. The built-in lithium ion battery is fully charged if the CHARGE indication remains off when the speaker power is off and connected to an AC outlet.
What happens if a Bluetooth speaker is overcharged?
Modern batteries have sophisticated sensors that prevent overcharging, but this does not guarantee that leaving the battery hooked into the charger won’t harm it. One charging cycle is finished when a battery is fully charged; a battery can only be fully charged a certain number of times before it is irreparably harmed.
Why does the battery on my speaker deplete so quickly?
In most circumstances, playing music louder than normal will result in the battery life of the device being depleted more quickly than usual. More input is needed to produce more output (power). The device will require more power to maintain the higher volume level the further it must transmit the sound.
Where is the jam speaker’s reset button?
On the speaker’s bottom, hold down the Bluetooth and Power buttons for 5 seconds. “Restoring to factory settings” will be announced over the speaker, and a white light will flash on the rear. Allow the factory reset to finish for around a minute. When the reset is complete, the speaker will make an announcement.
Why won’t my portable speaker charge?
Charging. Try charging the devices using a different USB port on your laptop or PC if that doesn’t work. Attempt using a different micro USB cord if the issues persist.
When charging, should a Bluetooth speaker be on or off?
Before charging or connecting your wireless Bluetooth speaker to its power source with a USB cable or AC adaptor, please be sure it is turned off.
Is my Bluetooth fully charged? How can I tell?
When the battery is charging, the indication light will come on. The light won’t turn on for up to a minute. The indicator light will go out after the headset’s battery is fully charged, which takes roughly 2-3 hours.