iWALK LPE002 Power Bank User Manual
- August 5, 2024
- iWALK
Table of Contents
iWALK LPE002 Power Bank
INTRODUCTION
The iWALK LPE002 Power Bank is a stylish and effective way to charge your devices while you’re on the go. This power bank, which was released by U2O GLOBAL CO., LTD., stands out because it is small and light, but it works well. It works with a wide range of devices, including the iWALK LinkPod Portable Charger (3500mAh, 4500mAh, 4800mAh, 5000mAh) and different iPhone models, so you can charge your devices anywhere, at any time. With features like USB Type C connectivity, a 2 Amp output for fast charging, and a small size that fits easily in your pocket, the iWALK LPE002 is a great deal at $29.99. It’s 7.99 inches long, 3.15 inches wide, and 1.69 inches thick, and it weighs 5.6 ounces. This makes it the perfect travel companion for staying linked and charged while you’re away.
SPECIFICATIONS
| Brand | iWALK |
|---|---|
| Connectivity Technology | USB |
| Connector Type | USB Type C |
| Compatible Devices | iWALK LinkPod Portable Charger 3500mAh, 4500mAh, 4800mAh, |
5000mAh
Compatible Phone Models| Small Portable Charger, iWALK Portable Charger
3350mAh, 4500mAh, 4800mAh, iPhone, USB-C
Special Feature| Lightweight Design
Input Voltage| 5 Volts
Mounting Type| Tabletop Mount
Amperage| 2 Amps
Price| $29.99
Package Dimensions| 7.99 x 3.15 x 1.69 inches
Item Weight| 5.6 ounces
Item Model Number| LPE002
Batteries| 1 Lithium Polymer battery required
Manufacturer| U2O GLOBAL CO., LTD
WHAT’S IN THE BOX
- Power Bank
- Manual
FEATURES
- Supports a wide range of iWALK LinkPod portable chargers, such as 3500mAh, 4500mAh, 4800mAh, and 5000mAh types.
- Ideal Storage: Made so that you can keep several iWALK portable chargers in one place. This keeps things organized and makes sure that all of your devices are fully charged and ready to go.
- Multiple Chargers at Once: It can charge up to four portable chargers at once, with a total output power of 10W.
- Fast Charging: It takes about two hours to fully charge a single portable charger.
- Safe Use: It has a charging/disconnecting switch to keep your power banks from overcharging and to keep them safe.
- Lightweight Design: Small and simple to put on different surfaces, like a dinner table or shoe cabinet.
- Connectivity via USB-C: Has USB-C ports for charging suitable devices quickly.
- Low power Input: It works with a normal 5V input power.
- It comes with a charging stand and a USB-C to USB-C cable for connecting devices.
- Uses: This is a great way to keep your iWALK power banks charged and organized at home or in the office.
- Modern Style: The design is sleek and simple, and it goes well with a lot of different types of furniture.
- Effective Charging: Made to give stable and effective power to devices that are linked.
- User-Friendly Interface: The settings are simple, and the charging/disconnecting switch is easy to use.
- Small Size: The form saves space, so it can fit on a counter or shelf that doesn’t have a lot of room.
- Durable Construction: Made with high-quality materials that will last and work well for a long time.
SETUP GUIDE
- Take the iWALK LinkPod Charging Station and any other items that came with it out of the box.
- Check the Items: Make sure the station and the USB-C to USB-C cord are whole and working well.
- Where to put the station: Place the charging stand on a flat surface, like a dining table or a shoe cabinet.
- Plug in the Cable: Connect the USB-C to USB-C cable to the charge station.
- Connect the Wall Charger: Plug the other end of the cable into a real USB-C wall charger that can provide enough power (5V2A or higher is suggested).
- Power On: Make sure the wall charger is turned on and plugged in.
- Put Portable Chargers In: Use the holes on the station to put up to four iWALK portable chargers.
- Watch the Charging: Make sure the charging lights on the station and the portable chargers are on to make sure they are charging correctly.
- Switch: Use the charging/disconnecting switch as needed to control the charging process and keep the battery from getting too full.
- Regular Maintenance: To keep the station free of dust and other things, clean it every so often.
- Avoid Overloading: To keep the station from getting damaged, make sure it’s not overloaded beyond its limit.
- The wire should be stored neatly when it’s not in use to keep it from getting worn out.
- Safe Storage: Keep the charging stand somewhere dry with good airflow.
- Remove After Use: To save energy and make the charger last longer, remove the station from the wall charger when not in use.
CARE & MAINTENANCE
- Clean it often: To keep the charging stand clean, wipe it down with a soft, dry cloth.
- Keep the station away from water and moisture to keep the electricity from breaking.
- Check the Cables: Before you use the USB-C cable, look for any signs of damage or wear on the connectors and wire.
- The station should be kept in a cool, dry place so that it doesn’t get too hot and so that it lasts longer.
- Avoid Overcharging: The charging/disconnecting switch lets you control how long the battery is charged and keep it from going over.
- Take Care: To keep the station’s structure, don’t drop it or hit it with something hard.
- Ventilation: Put the station somewhere with good airflow to keep the heat from building up.
- Power Source: To make sure the charger works well, use a high-quality USB-C wall charger that is suitable.
- Avoid Too Much Load: To avoid problems, don’t put more than four chargers in the station at once.
- See if There Are Any changes: Check the website of the charger maker for any changes or extra maintenance tips.
- cord Storage: Keep the charging cord in the right way to keep it from getting tangled up or worn out.
- Check ports: Make sure to check the station and charger’s ports often for damage or debris.
- Safety first: If the station seems to be broken in any way, like by getting too hot or making strange noises, stop using it and call customer service.
TROUBLESHOOTING
| Issue | Possible Cause | Solution |
|---|---|---|
| Power bank not charging | Faulty charging cable | Use a different cable |
| Device not charging from power bank | Low battery in power bank | Recharge the |
power bank
LED indicator not working| Defective LED| Contact manufacturer for
repair/replacement
Slow charging| High power consumption by device| Turn off device while
charging
Power bank overheating| Prolonged use| Allow the power bank to cool down
Cannot charge certain devices| Incompatible device| Check device compatibility
Power bank not turning on| Drained battery| Charge the power bank
Intermittent charging| Loose connection| Ensure a secure connection
Short battery life| Frequent full discharges| Avoid fully discharging the
power bank
Charging port damaged| Physical damage| Contact manufacturer for
repair/replacement
Battery swelling| Overcharging| Discontinue use and contact manufacturer
Power bank shuts down unexpectedly| Internal circuit issue| Contact
manufacturer for repair/replacement
Charging cable not fitting properly| Obstruction in port| Clean the charging
port
Device not recognized| Firmware issue| Update device firmware
Power bank not holding charge| End of battery life| Replace the battery or the
power bank
USB-C connector not working| Debris in connector| Clean the USB-C connector
PROS & CONS
Pros:
- Lightweight and portable design
- USB Type C connector
- Compatible with various iWALK and iPhone models
- Fast charging with 2 Amps output
- Compact size fits easily in pockets or bags
- Affordable pricing at $29.99
- Durable construction
- Reliable performance
- Easy to use
- Universal compatibility with other USB devices
Cons:
- Requires a Lithium Polymer battery
- Limited to 5 Volts input voltage
- May not support charging of larger devices
- No wireless charging capability
- Only available in one color option
CONTACT INFORMATION
U2O Building, No. 385 Huanzhu Road, Jimei, Xiamen, China(361021)
- Tel: +86-592-5030-771 / US CALL CENTER +1 888 961 5888
- FAX: 0592-5743-736
- Company Name: U2O GLOBAL., LTD.
- E-MAIL:Sales@iWALK.NET
FREQUENTLY ASKED QUESTIONS
What type of connectivity technology does the iWALK LPE002 Power Bank use?
The iWALK LPE002 Power Bank uses USB connectivity technology.
What connector type is available on the iWALK LPE002 Power Bank?
The iWALK LPE002 features a USB Type-C connector.
What devices are compatible with the iWALK LPE002 Power Bank?
It is compatible with iWALK LinkPod Portable Chargers (3500mAh, 4500mAh, 4800mAh, 5000mAh) and devices with USB-C connectors.
What phone models are compatible with the iWALK LPE002 Power Bank?
The iWALK LPE002 Power Bank is compatible with small portable chargers, iWALK Portable Chargers (3350mAh, 4500mAh, 4800mAh), and iPhones.
What is the input voltage for the iWALK LPE002 Power Bank?
The input voltage is 5 volts.
What is the amperage of the iWALK LPE002 Power Bank?
The amperage is 2 amps.
What is the price of the iWALK LPE002 Power Bank?
The price is $29.99.
What are the package dimensions for the iWALK LPE002 Power Bank?
The package dimensions are 7.99 x 3.15 x 1.69 inches.
How much does the iWALK LPE002 Power Bank weigh?
The iWALK LPE002 Power Bank weighs 5.6 ounces.
What type of battery is used in the iWALK LPE002 Power Bank?
The power bank uses 1 Lithium Polymer battery.
Who is the manufacturer of the iWALK LPE002 Power Bank?
The manufacturer is U2O GLOBAL CO., LTD.
Why is my iWALK LPE002 Power Bank not charging my device?
Ensure that the iWALK LPE002 Power Bank is fully charged. Check the USB cable and ports for any damage. Try using a different cable or charging a different device to rule out issues with the cable or device.
What should I do if the iWALK LPE002 Power Bank is not holding a charge?
Verify if the iWALK LPE002 Power Bank has been fully charged initially. If it still doesn’t hold a charge, it might be a battery issue. Try charging it with a different adapter and cable. If the problem persists, the battery may need replacement or service.
Why does my iWALK LPE002 Power Bank charge devices slowly?
Check if you are using the original or a compatible high-quality charging cable and adapter. The iWALK LPE002 Power Bank might also be in a low-power mode or have a lower input power adapter connected.
How can I fix the iWALK LPE002 Power Bank if it won't turn on?
Ensure the iWALK LPE002 Power Bank has sufficient charge by connecting it to a power source. If it still won’t turn on, try resetting the power bank by pressing and holding the power button for 10-15 seconds, if applicable.
VIDEO – PRODUCT OVERVIEW
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>