Smart metals 052.7500 Wall Lift for Touch Screens Max 100 kg Instruction Manual

: August 5, 2024
: Smart metals

Table of Contents

Smart metals 052.7500 Wall Lift for Touch Screens Max 100 kg
IMPORTANT SAFETY INFORMATION
MOUNTING REGULATIONS
ANTI-COLLISION EXPLAINED
MOUNTING INSTRUCTIONS
INSTRUCTIONS RESET CONTROL BOX
SPECIFICATION SHEET
WIRING DIAGRAM
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Smart metals 052.7500 Wall Lift for Touch Screens Max 100 kg

IMPORTANT SAFETY INFORMATION

Important safety information for both installer and user

Installer:
Before starting the installation read the safety instructions, the mounting regulations, and the rest of this product manual carefully. Failure to read, thoroughly understand, and follow all instructions can result in serious personal injury, damage to equipment, or voiding of factory warranty! It is the certified installer’s responsibility to make sure all mounting systems/accessories are properly assembled and installed using the instructions provided.

User:
Please carefully read the below safety information and user manual (if included) before using the height-adjustable mount or trolley. This ensures a failure-free working unit and avoids accidents.

Electrical Safety

Connect the unit to a properly grounded outlet only. Make sure, the unit can be immediately separated from the power outlet.
Only use the unit in dry rooms, protect it from water and other liquids. Only wipe the unit with a dry cloth.
Do not open the lift unit. RISK OF ELECTRIC SHOCK. There are no serviceable parts inside.
In case of dysfunction unplug the unit from the power outlet and call an authorized technical service person.
Do not overrun the line cord or damage it in any other way. Replace damaged line cords immediately with new identical ones.
The socket connections of the unit and the wall socket must be easily accessible.
Disconnect the mains plug before moving the product.
The unit is not dripping or splash water protected. Do not place objects filled with liquids on or spray the unit.
To reduce the risk of electric shock: Always unplug the unit from the electrical outlet before cleaning.

Mechanical safety

Assure installation of the unit by an authorized service person only.
Only use original mounting parts provided with the system and do not use attachments not recommended by the manufacturer.
Do not improperly load unit: For the max. load of unit please refer to the page with the specification sheet in this manual. Do not exceed: Use with heavier screens may result in instability causing tipping over resulting in death or serious injury! The height-adjustable feature of this unit will.
not function properly if the weight exceeds the given maximum load.
Use this mounting system only for its intended use as described in these instructions. Do not hang on the unit. VERY HEAVY UNIT. Severe risk of injury when the unit tips over due to improper usage.
Always keep the product’s motion path free from obstacles.
Before moving the unit up or down ensure at least a safety distance of 20 cm/ 7.9 inches from any part of the unit to any other fitment to avoid shear traps or squeezing points.
In case of an accident please release the operating panel. Movement of the unit will stop immediately.

Does your unit have anti-collision?

In case of an accident with a lift with an anti-collision it is very important to release the operating panel: continuing to push results in overruling the anti-collision! Also, consider carefully that anti-collision only comes into operation after approx. 1 second after the lift has been activated. Please read the separate chapter in this manual on this topic for its exact operation.

MOUNTING REGULATIONS

WARNING
A correct mounting is extremely important and this is not the responsibility of SmartMetals Mounting Solutions. Faulty mounting may result in injury to persons or damage to equipment. SmartMetals will not be responsible in any way if the product has been mounted incorrectly. Mounting fittings are not included with the product for reasons of safety, since the properties and bearing strength of walls/ceilings are specific for each case. Suitable mounting fittings must be selected based on the material of the wall/ceiling. Obtain advice from a specialist in the field or a specialist shop concerning the choice of mounting fittings. It is the responsibility of the installer to ensure that the wall/ceiling can support at least four times the combined weight of the screen/projector and bracket. The maximum load for this product is given in these mounting instructions. The instructions for installation and use of the screen/projector must also be followed concerning the location and attachment of the screen/projector.

GB Declaration of Conformity

Manufacturer: SmartMetals Mounting Solutions BV Vlietskade 8016 4241 WS ARKEL THE NETHERLANDS
hereby declares that: Wall lift

are compliant with the following directives: Machinery Directive 2006/42/EG EMC Directive 2014/35/EG References to the relevant harmonized standards used, or references to the specifications about which conformity is declared:

EN IEC 60204-1: 2016: Safety of machines – Electrical equipment of machines – Part 1: General Requirements.
EN ISO14120: 2015: Safety of machines – Guards – General requirements for the design and construction of fixed and movable guards.
EN IEC 60335-1: 2012: Household and similar electrical appliances – Safety – Part 1: General requirements
EN 614-1: 2006 + A1: 2009: Machine safety – Ergonomic design principles – Part 1: Terminology and general principles Arkel, 2 March 2020

ANTI-COLLISION EXPLAINED

IMPORTANT

For optimized safety, this lift system has been fitted with an integrated sensor, called PIEZO™. PIEZO™ anti-collision minimizes the risk of damage to the lift system and screen caused by crushing or blocking due to obstacles in the up-and-down trajectory of the lift. Examples are shown in the image below.

Please take into account the following notes:

To a certain extent, the function also increases personal safety, but it does not comply with specific legislation on personal safety.
Be aware that PIEZO™ will be ignored for approx. 1 second after activating the lift system, which means that the lift is already bridging distance without anticollision protection.

Although this graphic shows lifting columns applied in desk furniture instead of a monitor lift system, it’s the red circled squeezing examples that are of importance.

FUNCTIONALITY

PIEZO™ is a built-in electronic sensor in the lift column, which reacts to load changes. If the lift system drives into an obstacle the load will change. This load change is picked up by PIEZO™ and the signal is sent to the control box. The control box immediately stops the system and makes it drive in the opposite direction avoiding/minimizing the collision. This drive will only last for 4 seconds and never longer than the previous drive. At the collision, there will be a certain force (N) before the system stops and drives in the opposite direction. The typical force (N) is shown in graphic 1 below. The objective of the PIEZO™ system is that it should follow the official test standards EN12453 + EN12445 for equipment where obstacles/persons can be squeezed. “The bus door standard”: EN 12453 + EN12445 The below graphics 1 is similar to the max. forces in the “Industrial, commercial and garage doors and gates. Safety in the use of power operated doors. Requirements “standard and test methods”: EN12453 + EN12445. This standard describes how to test the “Squeezing” function and the max. force with which the system is allowed to squeeze over time. The blue area illustrates the max. force and period in which the force may be present. In most cases, the PIEZO™ system will comply with the standard, BUT in some cases there may be exceptions, illustrated by the red curve in the below illustration.

Graphics 1: