Yixin S99 Portable Colorful Wireless BT Speaker User Guide
- August 5, 2024
- Yixin
Table of Contents
Yixin S99 Portable Colorful Wireless BT Speaker
Product Information
Specifications
- Wireless Connectivity: Bluetooth
- Compliance: FCC Part 15
- Conditions: Must not cause harmful interference, must accept any received interference
Product Usage Instruction
Turning On/Off:
To turn on the device, press and hold the power button for a few seconds until
you see the indicator light flashing. To turn it off, repeat the same process.
Pairing with Bluetooth Device:
Make sure the device is in pairing mode. On your Bluetooth-enabled device,
search for available devices and select the device name to pair. Follow any
additional on-screen instructions if prompted. Once paired, you will hear a
confirmation sound.
Charging:
Use the provided charging cable to connect the device to a power source.
The indicator light will show the charging status. It is recommended to fully
charge the device before first use.
Maintenance:
Keep the device clean and dry. Avoid exposing it to extreme temperatures or
moisture. Use a soft, dry cloth to clean the device when needed.
Frequently Asked Questions (FAQ)
-
Q: What should I do if the device is not pairing with my Bluetooth device?
A: Make sure both devices are in close proximity and that the Bluetooth settings are enabled on your device. You may need to reset the Bluetooth connection on both devices and try pairing again. -
Q: How long does the battery last on a full charge?
A: The battery life may vary depending on usage, but on average, it can last up to 8 hours on a full charge.
Description
The product design is stylish, simple and generous, suitable for use in a variety of situations, whether it is outdoor or at home, can make you enjoy musics freely. The product supports Wireless BT connection playback, TF card, U disk and AUX audio Input playback, and also support under Wireless BT status, one-key answering, call-back function and FM radio function.
Functions and instructions
Wireless BT playback
Press the power button for about 5 seconds to start the speaker, you would
hear the prompt tone: Wireless BT mode, as its default mode is Wireless BT
function. And then turn on the Wireless BT in your phone, search the machine
called 599, then click directly to get pair till connection shows successful.
There is also a voice prompt set in the machine to remind successful
connection. At this point, You can listen to musics through the machine, and
control all by your phone, include play, pause, the previous, the next and
volume adjustment.
Hands-free
When a call received in, and connected with the machine, you can choose to
answer by your phone, or directly press on the machine to answer, press again
to hang up, and press twice to reject the call directly .
AUX audio playback
Use the randomly distributed 3.5mm audio cable to plug one end into the audio
hole of the machine, and plug the other end into the audio hole of the audio
source output.
TF card/U disk playback
Directly insert the TF card/U disk whose audio file format is MP3 format into
the corresponding TF card slot or USB port, and it can be used normally.
Lighting changes
Every time you short press the light to start switching, while switched all
lights mode, then press again will turn off all lights display.
(Non-standard)
Warning reminder [battery pack or assembled battery] shall not be exposed to such as sunlight, fire or similar overheating environment.
Charging and battery life
When the machine full charged, it works about 3-6 hours. The time change
according to the type and volume of the song. If DJ or heavy bass, the time
will be changed to be shorter. This situation is normal, so don’t worry. The
machine itself does not ship together with a charger, any 5V = 1A charger is
okay. During the charging process, the red indicator light will always be on,
while the red light will go out when it is full. Under normal circumstances,
it can be fully charged in about 3-4 hours. It’s acceptable to use the machine
while charging, which will not affect normal use, but there would be a certain
impact on battery life if always do that
Instructions
- Wireless BT module: BT5.0 With hands-free call function
- Input: DC 5V =-= 1A
- Power: 2x10W RMS
- Speaker specifications: 57MM 40
- Signal-to-noise ratio: ≥80dB
- Battery: 3.7V
- Product dimension: W213D100H95mm
Function Diagram
- Strap rope hole
- Play/Pause
- Increase volume (Long press) /The next (short press)
- Light switch/off
- ON/OFF
- Decrease volume (Long press) /The previous (Short press)
- Mode switch
- 3.5MM audio input
- USB interface
- TFcard slot
- charging indicator
- TYPE-C charging port
Troubleshooting
- Automatic shutdown: when the battery power is low, the battery protection will be turned on automatically, please charge it for 4 hours before use.
- Cannot play music: The music storage path cannot be recognized by the player. Please store the music files in the root directory of the removable device, and do not store them together with other files.
- There is no sound when connected to the computer: the computer interface is connected incorrectly, please select the correct audio output port.
- The keys do not respond or the functions are in disorder: try again after shutting down.
This manual has been proofread, if there are any typos, please contact the dealer.
Warranty Card
When purchasing a product, please fill out this card immediately and keep it in a safe place.
FCC STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure statement
The device has been evaluated to meet general RF exposure requirements. The
device can be used in porlable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>