Yixin YJ-08 Carbon Fibre Textured Colourful Speaker User Manual

YJ-08 Carbon Fibre Textured Colourful Speaker

Specifications

• Compliance: Part 15 of FCC rules
• Operation Conditions: Must not cause harmful interference, must accept received interference
• Radiation Exposure: Meets general RF exposure requirement
• Usage: Portable exposure condition without restriction

Product Usage Instructions

FCC Warning

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Radiation Exposure Statement

The device has been evaluated to meet general RF exposure requirements. It can be used in portable exposure conditions without restriction.

FAQ

• Q: Can the device be used in areas with high interference?
• A: The device is designed to accept interference and can be used in various conditions, including areas with interference. However, it should not cause harmful interference to other devices.
• Q : Are there any restrictions on the portability of the device?
• A: The device can be used in portable exposure conditions without any restrictions as it meets the general RF exposure requirement.

Welcome to choosing this product!
Please read the product instructions carefully before use. After reading, please save it for subsequent reference Please note that this manual does not contain the software and hardware configuration instructions and related information of the product. If you need help, please consult the seller. The pictures in this manual are for reference only. Please refer to the product in kind.

Basic Parameters

Product Features

1. Support wireless connection music playback;
2. Support wireless reconnect function;
3. Support TF card input;
4. Support U-disk input;
5. Support AUX audio input;
6. Support coaxial input.

Accessories

The accessories are as follows:

1. Speaker
2. Charging cable
3. User Manual

Buttons & Functions

1. Power on/off Power on: Switch to “ON” Power off: Switch to “OFF”
2. Wireless connection
3. After entering wireless mode, use a mobile phone or other devices to search for the wireless device name “M8” for pairing. it will enter the wireless playback mode once successfully connected.
4. After successful pairing, the next time you enter the wireless mode, you will be automatically connected for 10 seconds, and then enter the pairing state when the connection is over.
5. Previous / Next song switch, Pause / Play switch.
6. Short press to switch to the previous song.
7. Short press the key to switch to the next song.
8. Short press the key to Pause / Play; Long press to answer / hang up the phone. Short press the “M/LED” mode switch to change the light color; Long press to turn off the light.
9. Volume Control
10. Long press to increase the volume
11. Long press to decrease volume

Play on USB stick/TF card:
In power on state, insert the U disk / TF card, the sound will be automatically converted to U disk / TF mode, and issued a beep, 2 seconds will automatically play the song, U disk / TF card must have MP3, WAV format files;
External Audio AUX Input Mode:
In power on state, using the factory distribution cable to install the external devices (such as mobile phones, computers, MP3 and other audio input devices) audio head into the audio input port, at this time the audio will automatically switch to external audio input mode, you can play the audio on the device.

Maintenance and Repair

• While using, please read the suggestions to comply with the warranty terms to prolong the using life.
• Keep the device dry and not place it in a damp place as this may affect the internal circuitry.
• Do not place the device in the sun or in a place with high temperatures which will shorten the life of electronic parts and deform plastic parts.
• Do not leave the device in a cold place as it may cause the internal circuit board damage.
• Do not attempt to disassemble the device. If you are not professional, you may damage it.
• Do not drop, strongly vibrate, or hit the device with hard object, as this may damage the internal circuitry.
• Do not scratch the surface with sharp object, as this may damage the case.
• If the device does not work properly, please send it to the qualified service center, the staff will be eager to help you solve the problem.

FCC STATEMENT

FCC Warning
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interferenceto radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>