LEMUNA Q10 Earbuds User Manual
- August 3, 2024
- LEMUNA
Table of Contents
LEMUNA Q10 Earbuds
Product Information
Specifications:
- Compliance: Part 15 of the FCC Rules
- Conditions: Must not cause harmful interference and must accept any received interference
- Antenna: Must not be co-located or operated with any other antenna or transmitter
- RF Exposure: Evaluated to meet general RF exposure requirements in portable conditions without restriction
Product Usage Instructions
- Compliance with FCC Rules:
- Ensure that the device is operated in compliance with Part 15 of the FCC Rules to avoid harmful interference. The device must accept any interference received.
- Modifications:
- Do not make changes or modifications to the unit that are not expressly approved by the responsible party for compliance. Unauthorized modifications could void the user’s authority to operate the equipment.
- Antenna Usage:
- Avoid co-locating or operating the device and its antenna(s) with any other antenna or transmitter to prevent interference issues.
- RF Exposure:
- The device has been evaluated to meet general RF exposure requirements in portable conditions without any restrictions. Ensure proper handling to maintain compliance.
FAQ
Q: What should I do if I encounter interference issues?
A: If you experience interference, try adjusting the positioning of the device and its antenna(s) to minimize interference. If problems persist, contact customer support for further assistance.
Please tears off the insulation film on the earphones
Product Overview
Power on/off
Auto Power On
- Remove the earphones from the charging case to power on automatically.
- Press and hold for 3 seconds to manually power on.
Auto power off
- Place the earphones into the charging case to power off automatically.
- Automatically powers off after 5 minutes when not connected to a device.
Manual power off
Press and hold for 5 seconds to manually power off.
Reset
Double-click five times on one earphone (when not connected).
Pairing mode
- Take the earphones out of the charging case, when successfully connected, green lights out in both.
- The earphones in the pairing mode, select LeMuna QI for pairing in the mobile BT menu.
- After a successful connection, there is a reminder.
Controls
Music
- Play/Pause: Double-click the touch zone while playing.
- Previous song: Triple-click the left earphone touch zone.
- Next song: Triple-click the right earphone touch zone.
Volume
- Volume up: Single-click the right earphones touch zone.
- Volume down: Single-click the left earphones touch zone.
Call
- Answer: Double-click the touch zone when an incoming call comes in.
- Reject Long press the touch zone for 2s during an incoming call.
- Hang up: Double-click the touch zone during a call.
Active voice assistance
Press and hold the left ear touch zone for 2s to wake up/exit the voice assistant.
Game mode
Press and hold the right ear touch zone for 2s to enter game mode.
Charge
Charge the charging case through the charging cable, the charging case indicator light is always on when charging is complete. The earphones are put into the charging case and charged automatically, the earphones indicator light is off when charging is complete.
Specifications
Attention
Please make sure the product is dry before use. If there is any water, please wipe it off with a dry cloth before putting it back to the charging box to avoid damage the device.
Notice
-
Do not charge the device continuously for more than 12 hours.
-
Do not disassemble the headset or put the device into the fire to avoid explosion.
-
Do not place the magnetic charging cable or the magnetic charging port of the headset near metal objects.
-
Use of charging cables not approved by the manufacturer may cause fire, explosion or other hazards.
-
Use the product within the temperature range of 32°F-95°F and store the product within the temperature range of 14°F-113°F.
Excessively high or low temperatures may cause equipment malfunction. -
Do not expose the headset to the sun for a long period of time, otherwise, it will be easily deformed, aging and breakage.
-
This product has a built-in non-removable lithium battery, the battery is prohibited from disassembly, impact, extrusion or put into the fire, if there is a serious expansion, please do not continue to use.
Contact
- Warranty: 12-Month Limited Warranty
- Support: Lifetime Technical Support
- Email: support@lemunaglasses.com
- Official Website: www.lemunaglasses.com
- Support Phone: (+1) 2108588666
- youtube: @lemunaglasses
- ins: @lemuna_glasses
- Facebook: @Lemuna-Glasses
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter.
Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirement in portable exposure conditions without restriction.