Qishun TF-Y06 Bluetooth Speaker User Manual

August 3, 2024
Qishun

Qishun TF-Y06 Bluetooth Speaker

Product Specifications

  • Classification: Bluetooth speaker
  • Model: TF-Y06
  • Power Input: DC 5V/1A
  • Bluetooth Version: 5.4
  • Working Distance: About 10m
  • Power Output: 6.7W
  • Battery Capacity: 1200mAh
  • Charging Time: About 3 hours
  • Playing Time: About 3-5 hours
  • Product Size: 103(L)53(W)60(H)mm

Product Usage Instructions

Key Functions

  • Long Press (3 seconds): Power on/off
  • Click: Pause play
  • Double-click: TWS team and break team
  • 5 Clicks: Clear pairing record of phone and TWS
  • Incoming Call: Click to answer/hang up, hold for 2 seconds to reject
  • 10-second Press and Hold: Reset

LED Indicator Description

  • Red Light: Charging
  • Green Light: Fully charged indicator
  • Blue Light: Various Bluetooth status indications

Charging and Ports

  • Type-C Charging Port (1): For charging
  • MIC/AUX Ports (5): For connecting external devices
  • TF Card Port (4): For TF card insertion

Power Saving Features

  • In Bluetooth mode, the speaker will automatically shut down after 10 minutes of no connection.
  • In TF/AUX/radio mode, it will also shut down after being paused for 10 minutes.

Frequently Asked Questions

Q: What is the warranty period for the TF-Y06 Bluetooth Speaker?

A: The warranty period is 1 year from the date of purchase. Note that accessories are not covered under warranty.

Q: How do I reset the TF-Y06 Bluetooth Speaker?

A: Press and hold the power button for 10 seconds to reset the speaker.

Q: What does the LED indicator signify?

A: The red light indicates charging, green light shows full charge, and blue light signifies various Bluetooth status indications.

Product warranty card

Product terms of Service
The warranty period is 1 year from the date of purchase.
All accessories such as accessories are complimentary parts that are not covered by the warranty.

Special reminder

  1. This promise is only for the case of failure during normal use.
  2. All parts must be standard parts for all products and under warranty.
  3. The following circumstances are not guaranteed for replacement and warranty.
    • Product appearance worn.
    • Non-standard parts for purchased products.
    • Standard parts of purchased products that exceed the warranty period.
    • Use of expansion parts or peripherals not approved by the company resulting in damage or failure of product standard parts.
    • Extraordinary reasons (including poor power environment foreign matter into the equipment, transportation, movement, bump, etc.) caused parts damage extreme failure.
    • Illegal operation caused by product failure: self-disassembly, repair, installation or modification

After-sales service

  • Please read this product manual carefully before using the product. In the use of any problems, you can contact the local sales shop.
  • Replacement service: During the replacement period (within seven days from the date of purchase of the product), it appears in normal use If the fault is not caused by human, please keep the outer integrity of the product accessories packaging (or appearance damage) for warranty
  • Deal with). After the inspection confirms the fault, you can choose to replace or repair.
  • Warranty service: During the warranty period, if there is a non-human fault in normal use, you can enjoy free Warranty. Warranty service (free warranty within one year, if man-made damage, for charging maintenance treatment).

Key diagram

  1. Long press: Switch the machine on and off for 3 seconds
    Click: Pause play
    Double-click: TWS team and break team 5 clicks: Clear the pairing record of the phone and TWS When a call comes in: Click Answer to hang up/Hold down for 2 seconds to reject the call Press and hold for 10 seconds to reset

  2. Click to switch mode/Double Click to switch light effect/Bluetooth mode Hold down for 3 seconds to disconnect

  3. Click Volume Down/Long press the previous track

  4. Click Volume Plus/Long press next track

  5. Type-C charging port

  6. Charging indicator

  7. AUX port

  8. TF card prot

  9. Micphone

Function Introduction

LED indicator description

Red light: On when charging
Green light: The fully charged indicator is on
Blue light: Bluetooth waiting for pairing fast blinking, Bluetooth pairing steady on, Bluetooth normal playback slow blinking, temporarily Stop steady on, AUX/TF mode play music slowly blink, pause steady on

Energy province electricity

  1. In Bluetooth mode, wait for the pairing state for 10 minutes, and the phone will automatically shut down if there is no Bluetooth connection
  2. In TF/AUX/ radio mode, it will automatically shut down after being paused for 10 minutes

Bluetooth speaker instructions

  1. Mobile phone Bluetooth connection method

  2. Open the Bluetooth setting of the mobile phone, enter the search, see TF-Y06 display and then connect and pair (when the other mobile phone is in use, long press the M key to disconnect the Bluetooth and re-pair the connection).

  3. Speakerphone: Press ( ) to connect an incoming call. After the call is over, press and hold the ( ) key to reject an incoming call.

  4. TWS mode
    Double-click the power button ( ) to enter TWS mode. In TWS mode, double-click the power button to disconnect the TWS.

  5. AUX/TF switch
    TF: Click the M key to switch/pause for 10 minutes and then automatically shut down. AUX: Click the M key to switch/pause for 10 minutes and then automatically shut down.

  6. Reset function
    Long press the power button for more than 10 seconds to reset the operation, the operation will be automatically turned on after successful operation.

FCC

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide rea sonable protection againstharmful interference in a residential installation. This eq uipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.
    This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals