YACOO NIS-989-4LAN Embedded Box PC User Manual

YACOO NIS-989-4LAN Embedded Box PC

Specifications

• Model: NIS-989-4LAN Embedded Box PC
• Warranty: 1 year
• Manufacturer: YACOO
• Website: www.smartyacoo.com.

Product Usage Instructions

Safety Instructions

1. Read these safety instructions carefully and keep the User Manual for future reference.
2. Disconnect the equipment from the AC outlet before cleaning using a damp cloth (avoid liquid or spray detergents).
3. Ensure the power outlet socket for plug-in equipment is easily accessible and located near the equipment.
4. Keep the equipment away from humidity and place it on a stable surface during installation to prevent damage.
5. Avoid covering the openings on the enclosure to allow for air convection and prevent overheating.
6. Verify the correct voltage of the power source before connecting the equipment.
7. Secure the power cord to prevent tripping hazards and avoid placing objects over it.
8. Not all cautions and warnings on the equipment for safe operation.
9. If the equipment is not used for an extended period, disconnect it from the power source to prevent damage.
10. Avoid pouring liquids into any openings and do not attempt to open the equipment yourself.

FAQs

• Q: Where can I find technical support for the NIS-989-4LAN Embedded Box PC?
  • A: You can visit YACOO’s website at www.smartyacoo.com for the latest product information. Additionally, you can contact your distributor, sales representative, or YACOO’s customer service center for technical support. Make sure to have details like product name, serial number, peripheral attachments, software description, problem description, and error messages ready when seeking assistance.
• Q: What precautions should I take when handling components for installation?
  • A: Always use the components provided with the accessory box to ensure correct installation. Avoid using unverified components as they may cause unexpected damage. When dealing with the battery-powered real-time clock circuit, replace batteries only with the same or equivalent type recommended by the manufacturer to prevent explosions. Remember to disconnect the power cord from the chassis before working with hardware to prevent damage from power surges.

Copyright

• The documentation and the software included with this product are copyrighted 2024 By YACOO Co., Ltd. All rights are reserved. YACOO Co., Ltd. reserves the right to make improvements in the products described in this manual at any time without notice.
• No part of this manual may be reproduced/ copied/ translated or transmitted in any form or by any means without the prior written permission of YACOO Co., Ltd. The information provided in this manual is intended to be accurate and reliable. However, YACOO Co., Ltd. assumes no responsibility for its use, nor for any infringements of the rights of third parties which may result from its use.

Acknowledge

• The award is a trademark of Award Software International, Inc.
• VIA is a trademark of VIA Technologies, Inc..
• IBM、PC/AT、PS/2 & VGA is a trademark of International Business Machines Corporation. Intel®, Pentium® is a trademark of Intel Corporation.
• Microsoft Windows® is a trademark of Microsoft Corp.
• RTL is a trademark of Realtek Semi-Conductor Co., Ltd..
• ESS is a trademark of ESS Technology, Inc..
• UM is a trademark of United Microelectronics Corporation.
• SMI is a trademark of Silicon Motion, Inc..
• Creative is a trademark of Creative Technology Ltd.
• CHRONTEL is a trademark of Chrontel Inc.
• All other product names or trademarks are properties of their respective owners.
• For more information about this and other YACOO products, please visit our website at: http://www.smartyacoo.com

Product Warranty

Product Warranty（1 years）
YACOO warrants to you, the original purchaser, that each of its products will be free from defects in materials and workmanship for one year from the date of purchase.
This warranty does not apply to any products that have been repaired or altered by persons other than repair personnel authorized by YACOO, or which have been subject to misuse, abuse, accident or improper installation. YACOO assumes no liability under the terms of this warranty as a consequence of such events.

Because of YACOO’s high quality-control standards and rigorous testing, most of our customers never need to use our repair service. If a YACOO product is defective, it will be repaired or replaced at no charge during the warranty period. For out-of-warranty repairs, you will be billed according to the cost of replacement materials, service time, and freight. Please consult your dealer for more details.

If you think you have a defective product, follow these steps:

1. Collect all the information about the problem encountered. (For example, CPU speed, YACOO products used, other hardware and software used, etc.) Note anything abnormal and list any onscreen messages you get when the problem occurs.
2. Call your dealer and describe the problem. Please have your manual, product, and any helpful information readily available.
3. If your product is diagnosed as defective, obtain an RMA (return merchandise authorization) number from your dealer. This allows us to process your return more quickly.
4. Carefully pack the defective product, a fully completed Repair and Replacement Order Card, and a photocopy proof of purchase date (such as your sales receipt) in a shippable container. A product returned without proof of the purchase date is not eligible for warranty service.

Declaration of Conformity

FCC Class A
Note : This equipment has been tested and found to comply with the limits for a Class A digital device, under part 15 of the FCC part 15, CE E50252E, GB9254 Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used under the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

Technical Support and Assistance

1. Visit the YACOO website at www.smartyacoo.com support where you can find the latest information about the product.
2. Contact your distributor, sales representative, or YACOO ‘s customer service center for technical support if you need additional assistance. Please have the following information ready before you call:
3. Product name and serial number
4. Description of your peripheral attachments
5. Description of your software (operating system, version, application software, etc.)
6. A complete description of the problem
7. The exact wording of any error messages

Warnings

• Warning ！ Warnings indicate conditions, if not observed, can cause personal injury!
• Caution！ Cautions are included to help you avoid damaging hardware or losing data.
• Note ！ Notes provide optional additional information.

Safety Instructions

1. Read these safety instructions carefully, Keep this User Manual for later reference.

2. Disconnect this equipment from any AC outlet before cleaning. Use a damp cloth. Do not use liquid or spray detergents for cleaning.

3. For plug-in equipment, the power outlet socket must be located near the equipment and must be easily accessible.

4. Keep this equipment away from humidity.

5. Put this equipment on a reliable surface during installation. Dropping it or letting it fall may cause damage.

6. The openings on the enclosure are for air convection. Protect the equipment from overheating. Do not cover the openings.

7. Make sure the voltage of the power source is correct before connecting the equipment to the power outlet.

8. Position the power cord so that people cannot step on it. Do not place anything over the power cord.

9. All cautions and warnings on the equipment should be noted.

10. If the equipment is not used for a long time, disconnect it from the power source to avoid damage by transient overvoltage.

11. Never pour any liquid into an opening. This may cause fire or electrical shock.

12. Never open the equipment. For safety reasons, the equipment should be opened only by qualified service personnel.

13. If one of the following situations arises, get the equipment checked by service personnel: The power cord or plug is damaged.
    Liquid has penetrated the equipment.
    The equipment has been exposed to moisture.
    The equipment does not work well, or you cannot get it to work according to the user’s manual.
    The equipment has been dropped and damaged.
    The equipment has obvious signs of breakage.

14. Do not leave this equipment in an environment where the storage temperature may go below

    • 20° c (-4° f) or above 60° c (140° f). This could damage the equipment. The equipment should be in a controlled environment.

15. Caution: danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer, and discard used batteries according to the manufacturer’s instructions.

16. Caution: Any unverified component could cause unexpected damage. To ensure the correct installation, please always use the components (ex. Screws)provided with the accessory box.

17. Caution: The computer is provided with a battery-powered real-time clock circuit. There is a danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Discard used batteries according to the manufacturer’s instructions.

18. Caution: Always completely disconnect the power cord from your chassis whenever you work with the hardware. Do not make connections while the power is on. Sensitive electronic components can be damaged by sudden power surges The sound pressure level at the operator’s position according to IEC 704-1:1982 is no more than 70 dB (A).

19. Disclaimer: This set of instructions is given according to IEC 704-1. YACOO disclaims all responsibility for the accuracy of any statements contained herein.

Packing list

Before installation, please ensure the following items have been shipped:

Ordering Information

NIS-989-4LAN
Intel® Elkhart Lake Series CPU， DDR4 SODIMM memory， Support 4G/5G， support HDMI display，4GbE LAN，3USB3.0，2USB2.0，2COM，12bit GPIO，1SATA socket，1MSATA socket，DC 12V-19V input

General Introduction

Product Introduction
NIS-989-4LAN is an embedded industrial computer with the characteristics of reliability, ease of use, low cost, and low power consumption launched by our company.
Before using the NIS-989-4LAN for the first time, please read this manual carefully so that you can use this system correctly so that it meets the specified safety and performance indicators

Features

• Intel ® Elkhart Lake Series CPU
• DDR4 SODIMM memory
• Support 4G/5G， support HDMI display
• 4GbE LAN，3USB3.0，2*USB2.0
• 2*COM，12bit GPIO
• 1SATA socket，1MSATA socket
• DC 12V-19V input

Specifications

Specification

Processor| CPU| Intel® Elkhart Lake Series CPU
CPU Package| Onboard
BIOS| System BIOS: SPI BIOS， standard CMOS 65mah
Memory| Architecture| DDR4 SODIMM
Socket| SODIUM
Display| Graphic Controller| Integrated graphic media accelerator
HDMI| HDMI, Max. resolution: 4K
LVDS| LVDS
LAN| Controller| LAN1: RTL8111 GbE network，RJ45
LAN2: RTL8111 GbE network，RJ45
LAN3: RTL8111 GbE network，RJ45
LAN4: RTL8111 GbE network，RJ45
Audio| AUDIO| MIC/earphone
H/W Monitor| Watchdog Timer| 0-255 sec., provide Watchdog program
Temp. Monitor| Support CPU/Motherboard/HDD temp. monitoring
I/O| USB3.0| 3USB3.0
USB2.0| 2USB2.0, USB2.0 / 1.1，Max +5V@1A
COM| COM1: 3-wire RS232 TX/RX signal
COM2: 3-wire RS232/485 optional
COM3-COM6: 3-wire RS232,internal pin header
GPIO| 12 bit, provide program, User-defined I/O,3.3V/5V@24mA Level
Expansion Bus| M2 Key-B| M2 Key-B ,support USB 4G/5G communication module
1USIM slot
Storage| SANTA| Standard SATA socket， with SATA HDD power socket
MSATA| 1MSATA
Power| Power Type| AT/ATX power mode optional,DC12-19V input, UP6182, support power reverse and over-voltage protection
Button| Power Button| Switch with LED, external switch interface
Environment| Operating Temp.| -20°C ~ 70°C
Storage Temp.| -40°C ~ 80°C
Operating Humidity| 0% ~ 90% relative humidity,non-condensing
Storage Humidity| 0% ~ 90% relative humidity,non-condensing
Form factor| Dimensions| 154mm × 127.5mm × 48mm
Weight| ~

Product pictures

Mechanical Dimensions

Hardware Installation

Jumper and installation

1. Jumper Description
   The board can be configured via the jumper setting. The jumper is a metal bridge used to form a closed electric circuit. It consists of two metal pins and a jumper cap (inside is a metal clip, outside is a plastic cover for protection purposes). Putting on the jumper cap to form a closed electric circuit, while removing the jumper cap to disconnect the circuit. Sometimes a jumper will have three pins, labeled as pin1, pin2, and pin3. In this case, the user can connect either pins 1 and pin2, or pin2 and pin3.

2. Jumper Setting

   • AT_ATX1: AT &ATX Power Mode Select
     Description: CONN Pin-Header 1X3 2.54mm H11.65mm DIP-3P NPB Setting Function

     1-2| ATX（Default）
     2-3| AT

   • JSET2： COM2 RS232/485 Select
     Description：CONN Pin-Header 1X3 2.54mm H11.65mm DIP-3P NPB Setting Function

     1-2| RS232（Default）
     2-3| RS485

   • JCMOS： CMOS clear
     Description：CONN Pin-Header 1X3 2.54mm H11.65mm DIP-3P NPB Setting Function

     1-2| NORMAL（Default）
     2-3| CLEAR CMOS

   • J1： USB2 voltage select
     Description：CONN Pin-Header 1X3 2.54mm H11.65mm DIP-3P NPB Setting Function

     1-2| +5VS
     2-3| +5VA（Default）

   • J2： USB1 voltage select
     Description：CONN Pin-Header 1X3 2.54mm H11.65mm DIP-3P NPB Setting Function

     1-2| +5VS
     2-3| +5VA（Default）

   • JC1： LVDS voltage select
     Description：CONN Header 2X3 2.0mm H=8.9mm DIP-6P NPB Setting Function

     1-2| +3.3V
     3-4| +5VS
     5-6| +15V

3. NIS-989-4LAN I/O

I/O & Pin Definition

1. DC_IN1
   Description：CONN DC-POWER-JACK SDC-528 D5.3mm gold-plated DIP-6 NPBPin| Signal| Pin| Signal
   ---|---|---|---
   1| POWER_IN| 2| GND
   3| GND| 4| GND
   5| GND| 6| GND
2. HDMI1
   Description：CONN HDMI 16-110221110 side-entry long pin 2.3mm DIP-19P NPBPin| Signal| Pin| Signal
   ---|---|---|---
   1| HDMI1_DATA2_P| 2| GND
   3| HDMI1_DATA2_N| 4| HDMI1_DATA1_P
   5| GND| 6| HDMI1_DATA1_N
   7| HDMI1_DATA0_P| 8| GND
   9| HDMI1_DATA0_N| 10| HDMI1_CLK_P
   11| GND| 12| HDMI1_CLK_N
   13| NC| 14| NC
   15| HDMI1_SCL| 16| HDMI1_SDA
   17| GND| 18| HDMI1_PWR
   19| HDMI1_HPD| 20| IO_GND
   21| IO_GND| 22| IO_GND
   23| IO_GND| N1| NC
   N2| NC|  |
3. USB3
   Description：CONN USB3.0 AF 90°side-entry bent short pin 9P+4 DIP-13 NPBPin| Signal| Pin| Signal
   ---|---|---|---
   1| PWR_RUSB| 2| USBN5
   3| USBP5| 4| GND
   5| USB3_RXN3| 6| USB3_RXP3
   7| GND| 8| USB3_TXN3
   9| USB3_TXP3| X1| IO_GND
   X2| IO_GND| X3| IO_GND
   X4| IO_GND|  |
4. USB1
   Description：CONN USB2.0 dual-layer full shield with ejector latch, 90° horizontal orientation, 8P+4 DIP-12 NPBPin| Signal| Pin| Signal
   ---|---|---|---
   1| PWR_RUSB| 2| USBN3
   3| USBP3| 4| GND
   5| PWR_RUSB| 6| USBN4
   7| USBP4| 8| GND
   9| IO_GND| 10| IO_GND
   11| IO_GND| 12| IO_GND
5. LAN1
   Description： CONN RJ45 56LEDB-031884011131 Left green, right yellow, without ejector and without filter 8P+4 DIP-12Pin| Signal| Pin| Signal
   ---|---|---|---
   1| LAN2_TX0+| 2| LAN2_TX0-
   3| LAN2_TX1+| 4| LAN2_TX2+
   5| LAN2_TX2-| 6| LAN2_TX1-
   7| LAN2_TX3+| 8| LAN2_TX3-
   9| LED_ACT1| 10| VDD33_2
   11| LED_LINK1| 12| VDD33_2
   13| IO_GND| 14| IO_GND
6. LAN2
   Description： CONN RJ45 56LEDB-031884011131 Left green, right yellow, no ejector, no filter 8P+4 DIP-12Pin| Signal| Pin| Signal
   ---|---|---|---
   1| LAN1_TX0+| 2| LAN1_TX0-
   3| LAN1_TX1+| 4| LAN1_TX2+
   5| LAN1_TX2-| 6| LAN1_TX1-
   7| LAN1_TX3+| 8| LAN1_TX3-
   9| LED_ACT| 10| VDD33_1
   11| LED_LINK| 12| VDD33_1
   13| IO_GND| 14| IO_GND
7. LAN3
   Description： CONN RJ45 56LEDB-031884011131 Left green, right yellow, without ejector, without filter 8P+4 DIP-12Pin| Signal| Pin| Signal
   ---|---|---|---
   1| LAN3_TX0+| 2| LAN3_TX0-
   3| LAN3_TX1+| 4| LAN3_TX2+
   5| LAN3_TX2-| 6| LAN3_TX1-
   7| LAN3_TX3+| 8| LAN3_TX3-
   9| LED_ACT2| 10| VDD33_3
   11| LED_LINK2| 12| VDD33_3
   13| IO_GND| 14| IO_GND
8. LAN4
   Description： CONN RJ45 56LEDB-031884011131 Left green, right yellow, without ejector or filter 8P+4 DIP-12Pin| Signal| Pin| Signal
   ---|---|---|---
   1| LAN4_TX0+| 2| LAN4_TX0-
   3| LAN4_TX1+| 4| LAN4_TX2+
   5| LAN4_TX2-| 6| LAN4_TX1-
   7| LAN4_TX3+| 8| LAN4_TX3-
   9| LED_ACT4| 10| VDD33_4
   11| LED_LINK4| 12| VDD33_4
   13| IO_GND| 14| IO_GND
9. EDP_LVDS1
   Description： CONN Header QFA2201-P30 2x15P 2.0mm DIP-30 NPBPin| Signal| Pin| Signal
   ---|---|---|---
   1| LCDVDD| 2| LCDVDD
   3| LCDVDD| 4| EDP_HPD1
   5| GND| 6| GND
   7| LVDS_U0_N| 8| LVDS_U0_P
   9| LVDS_U1_N| 10| LVDS_U1_P
   11| LVDS_U2_N| 12| LVDS_U2_P
   13| GND| 14| GND
   15| LVDS_CLKU_N| 16| LVDS_CLKU_P
   17| LVDS_U3_N| 18| LVDS_U3_P
   19| LVDS_L0_N| 20| LVDS_L0_P
   21| LVDS_L1_N| 22| LVDS_L1_P
   23| LVDS_L2_N_EDP_TX0_N| 24| LVDS_L2_P_EDP_TX0_P
   25| GND| 26| GND
   27| LVDS_CLKL_N_EDP_AUXN| 28| LVDS_CLKL_P_EDP_AUXP
   29| LVDS_L3_N_EDP_TX1_N| 30| LVDS_L3_P_EDP_TX1_P
10. IVCN1
    Description： CONN Wafer 1X6 2.0mm DIP-6P NPB

11. HD_PWR1
    Description： CONN 2510 Pitch 1X4 FAN DIP4 NPBPin| Signal| Pin| Signal
    ---|---|---|---
    1| GND| 2| +V5S
    3| +V12S| 4| GND
12. SATA1
    Description： CONN SATA 7P MALE DIP-7 NPBPin| Signal| Pin| Signal
    ---|---|---|---
    1| GND| 2| SATA_TXP1
    3| SATA_TXN1| 4| GND
    5| SATA_RXN1| 6| SATA_RXP1
    7| GND| 8| GND
    9| GND|  |
13. AUDIO1
    Description： CONN Audio jack 2Line out PJ-353 Φ3.5 DIP6 NPBPin| Signal| Pin| Signal
    ---|---|---|---
    1| HDA_AGND| 2| FRONT_L
    3| FRONT_R| 4| FRONT_JD
    5| HDA_AGND| 6| NC
14. MIC1
    Description：CONN Audio jack 2Line out PJ-353 Φ3.5 DIP6 NPBPin| Signal| Pin| Signal
    ---|---|---|---
    1| HDA_AGND| 2| MIC1_L
    3| MIC1_R| 4| NC
    5| HDA_AGND| 6| NC
15. COM1
    Description： CONN DB9 DR9SLM Male R/A 90°ultra-thin dual-row soldering DIP-9 NPBPin| Signal| Pin| Signal
    ---|---|---|---
    1| HDCD#1| 2| HSIN1
    3| HSOUT1| 4| HDTR#1
    5| GND| 6| HDSR#1
    7| HRTS#1| 8| HCTS#1
    9| NRI1#| 10| IO_GND1
    11| IO_GND1| 12| NC
    13| NC|  |
16. COM2
    Description： CONN DB9 DR9SLM Male R/A 90°ultra-thin dual-row soldering DIP-9 NPBPin| Signal| Pin| Signal
    ---|---|---|---
    1| NC| 2| HSIN2
    3| HSOUT2| 4| NC
    5| GND| 6| NC
    7| NC| 8| RS485B#
    9| RS485B| 10| IO_GND1
    11| IO_GND1| 12| NC
    13| NC|  |
17. COM3_6
    Description： CONN Header 2X5 2.0mm H8.9mm DIP-10P NPBPin| Signal| Pin| Signal
    ---|---|---|---
    1| HSOUT3| 2| HSOUT4
    3| HSIN3| 4| HSIN4
    5| GND| 6| GND
    7| HSOUT5| 8| HSOUT6
    9| HSIN5| 10| HSIN6
18. JUSB1
    Description： CONN Header 2X5 2.0mm H8.9mm DIP-10P NPBPin| Signal| Pin| Signal
    ---|---|---|---
    1| PWR_RUSB1| 2| PWR_RUSB1
    3| USBN10| 4| USBN8
    5| USBP10| 6| USBP8
    7| GND| 8| GND
    9| NC| 10| GND
19. USB2
    Description： CONN USB3.0 Dual-layer half-shield, non-ejector, iron shell with blue adhesive, 90° horizontal orientation 8P+4 DIP-12 NPBPin| Signal| Pin| Signal
    ---|---|---|---
    U1| PWR_RUSB1| L1| PWR_RUSB1
    U2| USBN2| L2| USBN1
    U3| USBP2| L3| USBP1
    U4| GND| L4| GND
    U5| USB3_RXN2| L5| USB3_RXN1
    U6| USB3_RXP2| L6| USB3_RXP1
    U7| GND| L7| GND
    U8| USB3_TXN2| L8| USB3_TXN1
    U9| USB3_TXP1| L9| USB3_TXP
    S1| IO_GND1| S2| IO_GND1
    S3| IO_GND1| S4| IO_GND1
20. PWR_SW1
    Description： CONN POWER BUTTON LED PB01-203RL-4-101 DIP-4P NPBPin| Signal| Pin| Signal
    ---|---|---|---
    1| PWR_BTN#| 2| GND
    3| NC| L1| POWER_LED
    L2| GND|  |
21. JFP1
    Description： CONN Header 2X5 2.0mm H8.9mm DIP-10P NPBPin| Signal| Pin| Signal
    ---|---|---|---
    1| HDD_LED+| 2| POWER_LED+
    3| HDD_LED| 4| GND
    5| GND| 6| PWR_BTN#
    7| SYS_RESET_N| 8| GND
    9| NC| 10| NC
22. GPIO
    Description： CONN Header 2X5 2.0mm H8.9mm DIP-10P NPBPin| Signal| Pin| Signal
    ---|---|---|---
    1| GND| 2| VIO
    3| DIO1| 4| DIO8
    5| DIO2| 6| DIO7
    7| DIO3| 8| DIO6
    9| DIO4| 10| DIO5
23. WLAN-M1
    Description： CONN M2 SOCKET H8.5mm KEY-B 75PIN SMD NPBPin| Signal| Pin| Signal
    ---|---|---|---
    1| NC| 2| +V3.3S
    3| GND| 4| +V3.3S
    5| GND| 6| +V3.3S
    7| USBP6| 8| +V3.3S
    9| USBN6| 10| NC
    11| GND| 20| NC
    21| NC| 22| NC
    23| NC| 24| NC
    25| NC| 26| GPS_DIS1
    27| GND| 28| NC
    29| PCIE_RXN1| 30| SIM_RST#
    31| PCIE_RXP1| 32| SIM_CLK
    33| GND| 34| SIM_DATA
    35| PCIE_TXN1| 36| SIM_PWR
    37| PCIE_TXP1| 38| NC
    39| GND| 40| NC
    41| NC| 42| NC
    43| NC| 44| NC
    45| GND| 46| NC
    47| NC| 48| NC
    49| NC| 50| PCIE_RST#
    51| GND| 52| NC
    53| NC| 54| NC
    55| NC| 56| NC
    57| GND| 58| NC
    59| NC| 60| NC
    61| NC| 62| NC
    63| NC| 64| NC
    65| NC| 66| GND
    67| PCIE_RST#| 68| NC
    69| NC| 70| +V3.3S
    71| GND| 72| +V3.3S
    ---|---|---|---
    73| GND| 74| +V3.3S
    75| NC| 76| NC
    77| NC| H1| NC
    H2| NC|  |
24. MSATA1
    Description：CONN MiniPCIe SOCKET AAA-PCI-047-K H9.0mm 0.8P 52PIN SMD NPBPin| Signal| Pin| Signal
    ---|---|---|---
    1| NC| 2| +V3.3S
    3| LED_F| 4| GND
    5| LED_G| 6| NC
    7| NC| 8| LED_A
    9| GND| 10| LED_B
    11| NC| 12| LED_C
    13| NC| 14| LED_D
    15| GND| 16| LED_E
    17| DIGL0#| 18| GND
    19| DIGH0#| 20| NC
    21| GND| 22| NC
    23| SATA_RXP0| 24| +V3.3S
    25| SATA_RXN0| 26| GND
    27| GND| 28| NC
    29| GND| 30| NC
    31| SATA_TXN0| 32| NC
    33| SATA_TXP0| 34| GND
    35| GND| 36| NC
    37| GND| 38| NC
    39| +V3.3S| 40| GND
    41| +V3.3S| 42| NC
    43| GND| 44| NC
    ---|---|---|---
    45| NC| 46| NC
    47| NC| 48| NC
    49| NC| 50| GND
    51| NC| 52| +V3.3S
    53| NC| 54| NC
    H1| NC| H2| NC
25. DIMM2
    Description： CONN SO-DIMM DDR4 PH0.6mm H9.2MM SMD-260 正向NPBPin| Signal| Pin| Signal
    ---|---|---|---
    1| GND| 2| GND
    3| D4_CHB_DQ8| 4| D4_CHB_DQ15
    5| GND| 6| GND
    7| D4_CHB_DQ12| 8| D4_CHB_DQ14
    9| GND| 10| GND
    11| D4_CHB_DQS1_N| 12| VCC_DDR
    13| D4_CHB_DQS1_P| 14| GND
    15| GND| 16| D4_CHB_DQ13
    17| D4_CHB_DQ10| 18| GND
    19| GND| 20| D4_CHB_DQ11
    21| D4_CHB_DQ9| 22| GND
    23| GND| 24| D4_CHB_DQ2
    25| D4_CHB_DQ1| 26| GND
    27| GND| 28| D4_CHB_DQ0
    29| D4_CHB_DQ4| 30| GND
    31| GND| 32| D4_CHB_DQS0_N
    ---|---|---|---
    33| VCC_DDR| 34| D4_CHB_DQS0_P
    35| GND| 36| GND
    37| D4_CHB_DQ6| 38| D4_CHB_DQ3
    39| GND| 40| GND
    41| D4_CHB_DQ7| 42| D4_CHB_DQ5
    43| GND| 44| GND
    45| D4_CHB_DQ23| 46| D4_CHB_DQ18
    47| GND| 48| GND
    49| D4_CHB_DQ22| 50| D4_CHB_DQ16
    51| GND| 52| GND
    53| D4_CHB_DQS2_N| 54| VCC_DDR
    55| D4_CHB_DQS2_P| 56| GND
    57| GND| 58| D4_CHB_DQ17
    59| D4_CHB_DQ19| 60| GND
    61| GND| 62| D4_CHB_DQ20
    63| D4_CHB_DQ21| 64| GND
    65| GND| 66| D4_CHB_DQ30
    67| D4_CHB_DQ25| 68| GND
    69| GND| 70| D4_CHB_DQ29
    71| D4_CHB_DQ26| 72| GND
    73| GND| 74| D4_CHB_DQS3_N
    75| VCC_DDR| 76| D4_CHB_DQS3_P
    77| GND| 78| GND
    79| D4_CHB_DQ28| 80| D4_CHB_DQ27
    81| GND| 82| GND
    83| D4_CHB_DQ24| 84| D4_CHB_DQ31
    85| GND| 86| GND
    87| NC| 88| NC
    89| GND| 90| GND
    91| NC| 92| NC
    93| GND| 94| GND
    95| VCC_DDR| 96| VCC_DDR
    97| VCC_DDR| 98| GND
    99| GND| 100| NC
    101| NC| 102| GND
    103| GND| 104| NC
    105| NC| 106| GND
    107| GND| 108| DDR4_RESET#
    109| D4_CHB_DIMM0_CKE0| 110| D4_CHB_DIMM0_CKE1
    111| VCC_DDR| 112| VCC_DDR
    113| D4_CHB_BG1| 114| D4_CHB_ACT_N
    115| D4_CHB_BG0| 116| D4_CHB_ALERT_N
    117| VCC_DDR| 118| VCC_DDR
    119| D4_CHB_A12| 120| D4_CHB_A11
    ---|---|---|---
    121| D4_CHB_A9| 122| D4_CHB_A7
    123| VCC_DDR| 124| VCC_DDR
    125| D4_CHB_A8| 126| D4_CHB_A5
    127| D4_CHB_A6| 128| D4_CHB_A4
    129| VCC_DDR| 130| VCC_DDR
    131| D4_CHB_A3| 132| D4_CHB_A2
    133| D4_CHB_A1| 134| VCC_DDR
    135| VCC_DDR| 136| VCC_DDR
    137| D4_CHB_DIMM0_CK0_P| 138| D4_CHB_DIMM0_CK1_P
    139| D4_CHB_DIMM0_CK0_N| 140| D4_CHB_DIMM0_CK1_N
    141| VCC_DDR| 142| VCC_DDR
    143| D4_CHB_PARTY| 144| D4_CHB_A0
    145| D4_CHB_BA1| 146| D4_CHB_A10
    147| VCC_DDR| 148| VCC_DDR
    149| D4_CHB_DIMM0_S0_N| 150| D4_CHB_BA0
    151| D4_CHB_A14_WE_N| 152| D4_CHB_A16_RAS_N
    153| VCC_DDR| 154| VCC_DDR
    155| D4_CHB_DIMM0_ODT0| 156| D4_CHB_A15_CAS_N
    157| D4_CHB_DIMM0_S1_N| 158| D4_CHB_A13
    159| VCC_DDR| 160| VCC_DDR
    161| D4_CHB_DIMM0_ODT1| 162| NC
    163| VCC_DDR| 164| +VREF_CH1_CA
    165| NC| 166| GND
    167| GND| 168| GND
    169| D4_CHB_DQ34| 170| D4_CHB_DQ32
    171| GND| 172| GND
    173| D4_CHB_DQ33| 174| D4_CHB_DQ36
    175| GND| 176| GND
    177| D4_CHB_DQS4_N| 178| VCC_DDR
    179| D4_CHB_DQS4_P| 180| GND
    181| GND| 182| D4_CHB_DQ37
    183| D4_CHB_DQ35| 184| GND
    185| GND| 186| D4_CHB_DQ39
    187| D4_CHB_DQ38| 188| GND
    189| GND| 190| D4_CHB_DQ42
    191| D4_CHB_DQ46| 192| GND
    193| GND| 194| D4_CHB_DQ41
    195| D4_CHB_DQ45| 196| GND
    197| GND| 198| D4_CHB_DQS5_N
    199| VCC_DDR| 200| D4_CHB_DQS5_P
    201| GND| 202| GND
    203| D4_CHB_DQ43| 204| D4_CHB_DQ44
    205| GND| 206| GND
    207| D4_CHB_DQ47| 208| D4_CHB_DQ40
    ---|---|---|---
    209| GND| 210| GND
    211| D4_CHB_DQ50| 212| D4_CHB_DQ49
    213| GND| 214| GND
    215| D4_CHB_DQ48| 216| D4_CHB_DQ52
    217| GND| 218| GND
    219| D4_CHB_DQS6_N| 220| VCC_DDR
    221| D4_CHB_DQS6_P| 222| GND
    223| GND| 224| D4_CHB_DQ53
    225| D4_CHB_DQ51| 226| GND
    227| GND| 228| D4_CHB_DQ55
    229| D4_CHB_DQ54| 230| GND
    231| GND| 232| D4_CHB_DQ58
    233| D4_CHB_DQ62| 234| GND
    235| GND| 236| D4_CHB_DQ57
    237| D4_CHB_DQ61| 238| GND
    239| GND| 240| D4_CHB_DQS7_N
    241| VCC_DDR| 242| D4_CHB_DQS7
    243| GND| 244| GND
    245| D4_CHB_DQ59| 246| D4_CHB_DQ60
    247| GND| 248| GND
    249| D4_CHB_DQ63| 250| D4_CHB_DQ56
    251| GND| 252| GND
    253| SMB_CLK| 254| SMB_DATA
    255| +V3.3S| 256| GND
    257| VPP_DDR| 258| VTT_DDR
    259| VPP_DDR| 260| +V3.3S
    261| NC| 262| NC
    263| NC| 264| NC
26. SIM1
    Description： CONN Micro SIM card socket, PUSH self-ejector type, SMD-7P NPBPin| Signal| Pin| Signal
    ---|---|---|---
    C1| SIM_PWR| C2| SIM_RST#
    C3| SIM_CLK| C5| GND
    C6| SIM_VPP| C7| SIM_DATA
    G1| GND| G2| GND
    G3| GND| G4| GND
27. CPU_FAN1
    Description： CONN Wafer WDC104 1X4 1.25mm SMD-4P NPBPin| Signal| Pin| Signal
    ---|---|---|---
    1| GND| 2| +V12S
    3| FAN_TAC1| 4| FAN_CTL1

Delmation Products
Blauw-roodlaan 300
2718 SK Zoetermeer
079 – 342 20 41
www.delmation.nl
info@delmation.nl

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>