imperii SmartWatch IPG8 Moustache User Manual
- June 7, 2024
- imperii electronics
Table of Contents
imperii SmartWatch IPG8 Moustache User Manual
Compatible Operating Systems and requirements
- Android 4.4 or higher.
- iOS 8.4 or higher.
- Supports Bluetooth 4.0 or higher.
Preparation
Please charge the bracelet fully before first use. Charge it for 2-2.5 hours
if it does not turn on. The bracelet cannot be used while charging.
Charge the smart band once every Three months of inactive smart band.
Please charge the bracelet every 3 months if you don’t use it.
Connection Instructions
App download method
Method 1: Scan the QR code to download
Method 2: Search for “Wearfit2.0” in your Android store or in the
AppStore, download and install.
Scan the Qr code to enter the app download.
Android
IOS
Functions
Clock mode:
shows the remaining battery, date and time (date and time cannot be set on
the wristband, they will be synchronized with the phone as soon as you link
the devices). Press and hold the screen to change the interface.
Pedometer:
Automatically records the steps on a daily basis, as well as calorie
consumption or distance traveled each day.
Sleep monitor:
measure the quality of your sleep every night.
Heart rate:
measured automatically every hour. You can make a measurement manually from
the App. Go to this interface to start the measurement. The data will be
displayed when the test is finished.
Blood pressure:
measured automatically every hour. You can make a measurement manually from
the App. Go to this interface to start the measurement. The data will be
displayed when the test is finished.
Blood oxygen:
it is measured automatically every hour. You can make a measurement manually
from the App. Go to this interface to start the measurement. The data will be
displayed when the test is finished.
Training mode:
press and hold this interface to enter. You will see different sports modes
that will record your activity, steps, calories, distances, in sports such as
running, climbing, basketball, football, etc. Press once to pause, and press
and hold to exit.
Others:
Find my phone (press and hold to find, press to stop); Music control (press
to change, press and hold to enter); Messages (press and hold to enter, press
to change, press and hold again to return);Version; Off (press and hold to
turn off); Return (press and hold to return to the top menu).
More functions:
alarm; upgrade system; sedentary alert incoming calls; shake to take
picture; load alert; language sync.
Note: the bracelet can receive messages in 15 different languages: English, Czech, German, Spanish, French, Italian, Japanese, Korean, Portuguese, Russian, Thai, Simplified Chinese, Traditional Chinese, Indonesian and Arabic.
Frequently Asked Questions
Can’t find the bracelet or can’t connect?
Android systems:
- Please make sure that the Bluetooth is turned on, and that the Bluetooth icon on the wristband screen (if you see the symbol, it is that are connected). Put the bracelet next to the phone, and try to search and connect again. The connection can be established with systems Android 4.4 or higher.
- If you still cannot connect, enter Settings – Administrator applications -Authorizations – Application authorization. I searched Wearfit2.0, allow access. Enter Settings again and turn on the GPS location service. Restart the phone and try again.
IOS systems:
Please make sure that the Bluetooth is turned on, and that the Bluetooth icon
is not visible on the wristband screen (if the symbol is visible, it is
connected, please forget the device). Go to Settings – Bluetooth – Forget
device, and now the App can now detect the bracelet.
-
After linking the bracelet is not connected, or the battery is 0%?
The devices have not been linked correctly, please try again. -
No data displayed in the App?
Swipe down to update the data, these will be synchronized and displayed in the App. Automatic data synchronization will occur the first time the bracelet and device are connected, and then again every hour. In addition, you must activate the hourly measurement. The App reads the data of the bracelet every hour (steps, heart rate, etc.). No data will be displayed if the time measurement is disabled.
Specifications
Screen size
|
1.22 inches
---|---
Bluetooth
|
Bluetooth 4.0
Waterproof level
|
IP67
Battery Type
|
Polymer battery
Battery capacity
|
130mAh
Loading time
|
2-2.5 hours
Measurements
|
Diameter 40mm * 10mm
Loading method
|
Loading clip
Package
|
Bracelet, charging clip, user manual
Notices
- If there is a problem with the quality of the product or its use, please contact the seller directly for a quick solution.
- Measurements on this product are for reference only, and they cannot be used for medical purposes. Please continue at all times doctor’s instructions, and do not self-diagnose or self-medicate based on in the measurements of the bracelet.
- The product has a waterproof level of IP67, it can get wet at swim with the one rate, but it is not intended to dive or maintain it too much rate in the water. You should also not use it with hot water, as the steam can seep inside.
- The company reserves the right to modify this manual without prior notice. Some functions may change depending on the software version. which is normal.
- This product contains a polymer battery. Do not expose it to environments high temperature for too long, nor on fire.
TECHNICAL SERVICE
Visit: http://imperiielectronics.com/contactus
imperii SmartWatch IPG8 Moustache User Manual – Download
[optimized]
imperii SmartWatch IPG8 Moustache User Manual –
Download
imperii SmartWatch IPG8 Moustache User Manual – OCR PDF
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>