Puig 21813N Protector Motor Pro 2.0 Crash Pad Instruction Manual
- August 2, 2024
- Puig
Table of Contents
Puig 21813N Protector Motor Pro 2.0 Crash Pad
Product Specifications
- Product Name: KAWASAKI VERSYS 650 ’15 REF 21813N
- Product Type: Protector Motor Pro 2.0 / Pro 2.0 Crash Pad / Pro 2.0 Sturzpads
- Components Included: Caps set, Endkappen, M10/125×180 DIN912 screw, Nylon protector, Aluminium metal arrowhead right/left side, Right/Left Iron Plate, M8 x 50 DIN912 screw, M8 DIN125/A washer, M8 DIN6923 nut
Product Usage Instructions:
Assembly – Left Side
- Identify and organize the components numbered 2, 3, 4, 6, 8, 9, 11, and 12.
- Follow the provided diagram for correct placement of each component.
- Secure the components using the provided screws and nuts as per the instructions.
Assembly – Right Side
- Gather components numbered 1, 2, 3, 4, 5, 7, 9, 10, and 12.
- Refer to the assembly diagram to correctly position each component.
- Use the specified screws and washers to fasten the components securely in place.
Frequently Asked Questions (FAQ)
-
Q: Are additional tools required for assembly?
A: Basic tools like a screwdriver and wrench may be needed for assembly. -
Q: Can these protectors be used on other motorcycle models?
A: These protectors are specifically designed for KAWASAKI VERSYS 650 ’15 model.
www.puig.tv
www.puigusa.com
info@puig.tv
info@puigusa.com
KAWASAKI VERSYS 650 ’15
REF 21813N
PRO 2.0 CRASH PAD
INSTRUCTIONS TO ASSEMBLE
Remove the fasteners that subject the chassis to the engine. Mount the
protectors on each own side as the figure below shows. Tight the set, and
place the caps. All the screws replaced, should be tightened to the torque
specified in the oem maintenance manual for your motorcycle. if no torque
specifications are provided in the oem maintenance manual, may be used 54Nm
for all M10 screws.
Medium strength liquid thread-locker (i.e. “Loctite”) should be used to secure
all screws, bolts and nuts. All screws, bolts and nuts should be checked after
driving the first 50 km to ensure that all are tightened to the proper torque.
FOR TO ASSEMBLE THE CRASH PADS, IF YOU ARE NOT A TRAINED MECHANIC, PLEASE CONTACT A SPECIALIST. MOTOPLASTIC, S.A. TAKES NO RESPONSIBILITY FOR DAMAGES CAUSED BY IMPROPER INSTALLATION. THE USE OF CRASH PADS DO NOT GUARANTEE A FULL PROTECTION IN CASE OF ACCIDENT. MOTOPLASTIC-PUIG DECLINE ANY RESPONSIBILITY IN CASE OF MOTORCYCLE DAMAGE.
| ID. | DESCRIPTION | QTY. | ||
|---|---|---|---|---|
| 1 | Caps set | 2 | ||
| 2 | M10/125×180 DIN912 screw | 2 | ||
| 3 | Ø20ext.Ø10 int.x2 washer | 2 | ||
| 4 | Nylon protector | 2 | ||
| 5 | Aluminium metal arrowhead right hand side | 1 | ||
| 6 | Aluminium metal arrowhead left hand side | 1 | ||
| 7 | Right Iron Plate | 1 | ||
| 8 | Left Iron Plate | |||
| 9 | M8 x 50 DIN912 screw | 2 | ||
| 10 | Aluminium metal arrowhead right hand side Ø20.5×20 | 1 | ||
| 11 | Aluminium metal arrowhead left hand side Ø20.5×24 | 1 | ||
| 12 | M8 DIN125/A washer | 3 | ||
| 13 | M8 DIN6923 nut | 1 |
MOUNTING INSTRUCTIONS
Created by: www.rrdisseny.cat
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>