METRON PC02Y Plus Smart Portable EV Chargers User Manual
- August 2, 2024
- METRON
Table of Contents
- METRON PC02Y Plus Smart Portable EV Chargers
- Product Usage Instructions
- INTRODUCTION
- IMPROPER USE
- GENERAL SAFETY INSTRUCTIONS
- GET STARTED
- REMOTE CHARGE PORT OPEN & PLUG UNLOCK for TESLA electric vehicles
- SETTING THE DESIRED CHARGING CURRENT / POWER without WiFi connection
- USING THE WiFi METRON Charge Control application
- METRON Wireless Dynamic Power Control
- STATUS NOTIFICATION BY LED BLINKS
- TECHNICAL SPECIFICATIONS
- CLEANING & STORAGE
- LIMITED WARRANTY
- FAQ
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
METRON PC02Y Plus Smart Portable EV Chargers
Specifications:
- Models : PC02Y+, PC04Y+, PC04YT+, PC05Y+, PC05YT+
- Type : SMART Portable EV Chargers
Product Usage Instructions
Getting Started:
Before using the portable EV charging station, ensure you have read the
user manual thoroughly. Contact the manufacturer or dealer if unsure about
proper usage.
General Safety Instructions:
Do not engage in improper use to avoid property damage or personal injury. The
warranty will be voided in case of improper use. Follow the symbols used in
the manual and on the product for safety.
Setting the Desired Charging Current / Power:
-
Choose the appropriate charging current/power level based on your model:
-
PC02Y+
-
LED Blinks: Charging Current / Power
-
1: 6 A / 1.4 kW
-
2: 8 A / 1.8 kW
-
3: 10 A / 2.3 kW
-
4: 13 A / 3.0 kW
-
5: 16 A / 3.7 kW
-
6: 20 A / 4.6 kW
-
7: 25 A / 5.8 kW
-
8: 32 A / 7.4 kW
-
-
Press the push button to set the desired charging current / power level as per the LED blinks indicated for your model.
Using the WiFi METRON Charge Control Application:
The METRON Charge Control application allows users to monitor and control
various aspects of charging, house load, energy consumption, solar power, and
solar energy production.
METRON Wireless Dynamic Power Control:
The wireless signal range is up to 500m with a built-in antenna and up to
2000m with additional antennas on the METRON Dynamic EV Charging Unit (model
3FD-3). No additional antenna is usually needed for systems installed within
one house.
INTRODUCTION
METRON PC02Y+, PC04Y+, PC04YT+, PC05Y+ and PC05YT+ are extremely compact & lightweight SMART portable EV chargers designed to charge electric vehicles from any standard industrial socket (e.g. 1 or 3-phase CEE sockets) or with an adaptor also from any household socket (e.g. Schuko). PC02/4/5Y(T)+ SMART portable EV chargers actually convert any power outlet/socket to EV charging station with maximum user safety features and smart charging capability through built-in Metron proprietary Wireless Dynamic Power Control system and also a user-friendly WiFi Metron Charge Control application. The other big advantage is the fact that METRON portable chargers don’t have that regular heavy in-line “bulky box” as others do, what makes them lighter, easier to install/connect and also easier to store in a carrier case. This truly unique design can also totally replace regular wall-box type charging stations and you can also bring it with you wherever you go. Any other use is not allowed and is regarded as improper use. Before using the portable EV charging station, please thoroughly read this manual and follow the instructions provided therein. Please keep the manual for future use. If you are unsure about the proper usage, please contact the manufacturer or your dealer before usage.
IMPROPER USE
Improper use can lead to property damage or personal injury. In such cases, the manufacturer and retailer accept no liability. The warranty will be voided in case of improper use.
You must not:
- modify/manipulate the portable EV charging station!
- drive over the portable EV charging station!
- connect unsuitable plugs and cables!
- www.eauto.si
- info@eauto.si
- +386 51 320 538
- Podnart 33, SI-4244 Podnart draws more than the maximum specified charging current from the portable
- EV charging station!
- use the portable EV charging station if damaged!
GENERAL SAFETY INSTRUCTIONS
- Carefully read this security instruction before using the product!
- Never draw more than the maximum specified charging current from the portable EV charging station!
- Children are not allowed to use the portable EV charging station.
- Keep animals away while using the portable EV charging station.
- Avoid liquids entering the portable EV charging station. Never use the portable EV charging station if the socket or plug are wet.
- Only connect undamaged, designated, and labeled plugs & cables to the portable EV charging station.
SYMBOLS USED
The following symbols are used in this manual and on the product:
GET STARTED
- Check the portable EV charging station before use. Do not use the portable EV charging station if damaged!
- Never draw more than the maximum specified charging current from the portable EV charging station!
- Do not use the portable EV charging station if the socket and plug are wet.
- Only connect undamaged, designated and labeled plugs & cables to the portable EV charging station.
- Don’t unplug during the charging process.
- Always operate in the specified order of steps.
- Socket will provide a high voltage (230 / 400 V)!
- Avoid using multiple adapter/power strips as they can lead to overload.
First plug the portable EV charger in the wall outlet. Immediately STATUS LED starts blinking: number of blinks tells you what is the saved charging power/speed setting (see the next page). Afterwards status LED g lows constantly till AC power is present indicating standby/ready status. When you plug it into the vehicle Type 1/2 socket the STATUS LED starts blinking slowly what means the vehicle is charging. When your electric vehicle is fully charged the LED glows constantly again. If wireless Metron Dynamic Power Control system that offers smart charging is installed the SIGNAL LED glows what indicates the charging power is dynamically controlled in order to not blow main house fuses; this system is also smartly taking into account the solar/wind/hydro power plant if house has it installed (see chapter “METRON Wireless Dynamic Power Control” for more info). Advanced users can also via WiFi connect to built-in Metron Charge Control application which offers possibility to change charging power, delay charging start, see real-time charging&house&solar power & energy, activate solar SURPLUS charging and much more (see chapter “USING THE WiFi METRON Charge Control application” for more info).
REMOTE CHARGE PORT OPEN & PLUG UNLOCK for TESLA electric vehicles
- When PC04YT+/PC05YT+ is plugged into the wall outlet/socket (power applied), pressing a “2-function” button on the vehicle Type 2 plug sends a remote-control signal to your TESLA vehicle charge port which then opens. Signal range is usually between 3 and 15 meters. This feature eliminates user “touching” the smart phone or Tesla central screen in order to open the charge port. Remote-control signal also wakes-up the Tesla vehicle from sleep – sometimes the button needs to be pressed several times to wake up the vehicle.
- To unplug PC04YT+/PC05YT+ while still charging or when charging completed press and hold the “2-function” button for a second. The car will unlock the vehicle plug (only if car is unlocked/owner nearby!) and then you can unplug it. Plug unlock function works even if the PC04YT+/PC05YT+ is not connected to power source. This feature once again eliminates the need for user “touching” the smart phone or Tesla central screen in order to unlock the PC04YT+/PC05YT+ plug from Tesla charge port.
SETTING THE DESIRED CHARGING CURRENT / POWER without WiFi connection
METRON portable EV chargers allow users to set desired charging current / power before being plugged in the electric vehicle charging socket. Procedure is simple:
- Press and hold the push button: STATUS LED switches off immediately.
- After 5 seconds STATUS LED starts blinking slowly.
- Releasing the push button after a certain number of blinks determines the charging current/power as follows:
The new charging current / power setting is stored in the memory and it stays the same (even after the power supply is not present anymore) until the next setting change is performed.
USING THE WiFi METRON Charge Control application
Smart portable EV chargers PC02Y+, PC04Y+, PC04YT+, PC05Y+ and PC05YT+ have a built-in WiFi access point with web server what enables users to connect to it wirelessly by any smart phone, tablet or laptop PC. As there is a web server inside with preloaded METRON Charge Control application you don’t need to install any additional program/application on your device because the METRON Charge Control simply runs in your favorite web browser (Google Chrome, Microsoft Edge, Mozilla Firefox…) on any operating system (Google Android, Apple iOS, Microsoft Windows, Huawei HarmonyOS, Linux…) you have on your smart phone, tablet or laptop PC.
Using the web-based METRON Charge Control application user can:
- Set the desired charging current and delay charging start.
- Turn on/off solar SURPLUS charging if solar power plant is installed.
- See all the real time measurements of charging power, charging current and charging energy.
- Change WiFi password and WiFi name (ssid).
- Connect the charging station to local WiFi network and also set the charging station internet access in the WiFi router (advanced users). OTA (over-the-air) install UPDATES for application firmware via WiFi.
- If METRON Dynamic EV Charging Unit for SMART charging with house main fuse protection is installed the user can also see house load, house energy consumption, solar power and solar energy production.
In order to connect to the WiFi METRON Charge Control application you need to do the following:
- Make sure the charging station is energized (connected to power).
- Go to WiFi menu in your smart phone, tablet or laptop PC and search for WiFi networks.
- Find “METRON Portable 1” (default) network and connect to it; enter the WiFi password 12345678 (this is default – it is recommended that you change it in the METRON Charge Control application).
- Scan QR code you find on the station and follow the link (it will open your default web browser and launch the Metron Charge Control automatically); OR open your favorite web browser and type in the following IP address: http://192.168.4.4
- The METRON Charge Control application will be loaded immediately. Up to 5 users (devices) at a time can be wirelessly connected to the station and all connected devices will automatically receive all the latest data; for example, if one user changes the charging current with the slider all others will see that on their screens.
If you forget the WiFi password you’ve set, you need to do the following:
- Disconnect the station from power, press the “Push Button” and keep it pressed.
- Connect the station to power.
- The blue STATUS LED starts blinking 2 times.
- After 30 seconds the STATUS LED will turn on for 3 seconds and then turn off.
- Release the “Push Button” and WiFi name (SSID) & password are reset to default values.
The METRON Charge Control application is intuitive and usually doesn’t need more instructions to be used; just browse and explore the functions. Where the additional user info is required important user instructions are explained under “notes”. If you don’t understand something please feel free to contact Metron.
METRON Wireless Dynamic Power Control
Smart portable EV chargers PC02Y+, PC04Y+, PC04YT+, PC05Y+ and PC05YT+ are equipped with Wireless Dynamic Power Control system that is always monitoring the load at house main fuse with electric current sensors and dynamically adjusting (lowering or rising) the charging current/power of your electric vehicle in the way the main house fuse never gets overloaded (never blows-up). If the house has a solar (or wind/hydro) power plant installed this system allows higher current/power charging than would be allowed by the main fuse and it also enables the possibility of user activated solar SURPLUS charging what means the vehicle will be charged only with excess solar power without taking any energy from the grid. METRON Wireless Dynamic Power Control system is designed to work with 1-phase and 3-phase power systems. To be short, the METRON Dynamic Power Control system enables users to charge their electric vehicle without worrying about the load other household appliances might draw from the in-house grid. Beside owning the PC02Y+, PC04Y+, PC04YT+, PC05Y+ or PC05YT+ all you need is 1 pcs METRON Dynamic EV Charging Unit (model 3FD-3) and current sensors. This way up to 150 Metron portable AND/OR wall-box style EV charging stations can be controlled and main fuses with rated currents up to 1000A are supported.
Note : Wireless signal has an open-air space range of 500m with built-in antenna and up to 2000m with additional antennas on the METRON Dynamic EV Charging Unit (model 3FD-3). If the system is installed within one house usually no additional antenna is needed.
Detailed schematics for installing the METRON Dynamic Power Control system are located in a separate installation manual intended for qualified installers only.
STATUS NOTIFICATION BY LED BLINKS
TECHNICAL SPECIFICATIONS
Smart portable EV chargers models PC02Y+, PC04Y+, PC04YT+, PC05Y+ and PC05YT+ can have some additional designation next to the number such as PC02Y+xyz, PC04Y+xyz, PC04YTxyz+, PC05Y+xyz and PC05YT+xyz, where “x” and “y” and “z” may be any alphanumeric character or blank, representing a color or wall plug type, or lower than standard charging current limit or factory version, or any possible future product differentiations, which do not have an impact on general technical specifications.
It is only allowed to use Metron original charging adaptors in combination with PC02Y+, PC04Y+, PC04YT+, PC05Y+ or PC05YT+ portable EV charging stations.
WHAT IS RCD AND HOW DOES IT WORK?
RCD is an acronym for Residual Current Device – sometimes it can be called
also Earth Leakage Circuit Breaker or Safety Switch. Its purpose is to prevent
you from getting a fatal electric shock if you touch live part, such as a bare
copper wire under high voltage. RCDs offer a level of personal protection that
ordinary fuses/circuit-breakers cannot provide. RCD constantly monitors the
electric current flowing through one or more circuits which it protects. If it
detects electricity flowing down an unintended path, such as through a person
who has touched a live part, the RCD will switch the circuit off very quickly,
significantly reducing the risk of death or serious injury. Every portable
charging station has integrated Type A 30mA AC + 6mA DC RCD what ensures
maximum possible level of personal protection as it protects users from AC,
pulsating DC and pure DC leakage currents.
CLEANING & STORAGE
Use only a dry or damp cloth for cleaning the unplugged portable EV charging station. Do not use cleaning detergents. Please secure portable EV charging station while transporting it in your vehicle to avoid damage. Store at a dry place.
- Portable EV charging station must be completely unplugged before cleaning!
- Secure portable EV charging station while transporting!
- Avoid water getting to contact parts!
DISPOSAL
The symbol “crossed-out trash can” signifies the requirement for separate
disposal of electrical and electronic waste. These devices may contain
hazardous and environmentally harmful substances. Please take such devices to
a designated collection point for the recycling of electrical and electronic
equipment and do not dispose of them in regular household waste. You can
obtain further information from local waste disposal services or the company
from which you purchased the product.
GREEN PRODUCTION
All our products are produced in a carbon neutral way by using the
“Sustainable energy cycle” method. The production plant where we make charging
cables and portable charging stations is the first fully sustainable
production facility for EV charging cables. All energy needed for the heating
and cooling of the building, production process and for transportation of
goods and employees (except deliveries of heavy materials by trucks), is
produced by 2 photovoltaic power plants and stored in 4 storage batteries.
Almost all of the raw materials we use (cables, plugs) are produced in EU, to
shorten supply routes and support local economy. Buying our products helps
develop sustainable economy.
LIMITED WARRANTY
METRON warrants its product to the original consumer purchaser that it will repair, or replace, any product that is determined to be defective for the following terms: Two (2) years from date of purchase on all components. To be eligible for repair or replacement under this warranty, the product in question must be sent back to METRON within the warranty period and the original consumer purchaser must comply with the following conditions: The product thereof must not have been modified or altered in any way by an unauthorized source; The product thereof must have been used in accordance with the user manual. This limited warranty does not cover: Damage due to improper use; Accidental or intentional damage; Misuse, abuse, corrosion, or neglect; Product impaired by severe natural conditions, such as excessive hail storms, lightning strikes, tornados, flooding, ice or other natural occurrences; Damage due to improper packaging on return shipment. Any and all labor charges for troubleshooting, removal or replacement of the product are not covered by this warranty and will not be honored by METRON. All shipping costs regarding repair or replacement of the product is to be pre-paid by the original consumer purchaser.
- www.eauto.si
- Podnart 33, SI-4244 Podnart
- info@eauto.si
- +386 51 320 538
FAQ
Q: What should I do if I encounter issues with setting the charging current
power?
A: Ensure you are following the correct LED blink indications for your model
as outlined in the user manual. If issues persist, contact Metron for
assistance.
Q: How can I access and use the METRON Charge Control application?
A: You can access the web-based application to monitor and control charging
parameters. Explore the functions intuitively; for detailed instructions,
refer to notes within the application or contact Metron for further
assistance.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>