METRON PC05A Charging Adapter User Manual
- June 5, 2024
- METRON
Table of Contents
METRON PC05A Charging Adapter User Manual
Product overview
Type2-Schuko 16A or 3x Schuko 3x16A CEE
Charging adapter was designed to enable charging devices without Type 2 plugs, but with normal schuko 16A plugs. Adapter does not function with charging stations that have charging cable type 2 attached. It sends signals “car ready” and “car charging” to charging station and thus enabling charging with schuko plug.
GET STARTED
- Plug charging adapter to charging station Type 2 socket.
- Press on Switch (1) (see picture) => charging station gets the message “car ready”.
- Press on Switch (2) (see picture) immediately after switching on switch (1), charging station gets the message “car ready”.
- Charging station powers relay and you have voltage on your adapter.
Some stations do not require this procedure to be followed, they start charging when you plug in the adapter with both switches at “ON” position.
When you want to stop charging, use the opposite procedure, by first pressing second switch (2) and then first one (1). This will release the cable lock at charging station socket and let you pull out the adapter.
Never use more than 16A or 3x16A load at charging adapter!
TECHNICAL SPECIFICATIONS
Maximum continuous current [A] | 16 |
---|---|
Ingress protection (IP) rating | 44 |
Temperature range [C°] | from -40 to +55 |
Cable cross section [mm2 ] | 2,5 |
Cable length [mm] | 250 |
CHARGING ON TESLA DESTINATION CHARGER
Press switch (1) for “car ready” status. Wait 20 seconds and press switch (2) to start the charging process. It only functions on some destination chargers.
WARRANTY
12 months from date of purchase, covering charging adapter without shipping costs. The adapter is MOISTURE RESISTANT, but NOT WATERPROOF, so warranty is void in case of water penetration!
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>