FORMD T1 Reference V2.0 Want Some More Photos Instruction Manual
- July 31, 2024
- FORMD
Table of Contents
FORMD T1 Reference V2.0 Want Some More Photos
Product Specifications
- Model: T1 REF V2.0
- Manufacturer: FormDT1.com
- Fasteners Included: M3 Thumbscrew, M3 Flat Head Screw, M3 Countersunk Screw, M3 Standoff, M3 Female Standoff, CSM3-5, CSM3-8
Product Usage Instructions
Assembly
- Lay out all the components included in the package on a clean, flat surface.
- Identify the various panels and fasteners according to the manual.
- Assemble the side panels, top/bottom panels, rear panel, and front panel according to the provided instructions.
- Use the appropriate fasteners for each component and ensure not to overtighten the screws.
Installation of Components
- Install the SFX PSU Bracket using the provided screws.
- Attach the Case Feet to the bottom panel of the case.
- Secure the C13-C14 Inlet Cable to the side panels.
- Install the Fan Bracket and Lock Bar as per the manual.
Power Button and Fan Installation
- Mount the Power Button on the front panel of the case.
- Attach the Fan Bracket to the designated area inside the case.
- Ensure all components are securely fastened but not over tightened.
Frequently Asked Questions (FAQ)
Q: What should I do if I encounter resistance while tightening the
screws?
A: Do not tighten more than one-quarter turn once resistance is encountered.
Each fastener is different, so be cautious not to over tighten.
Reference V2.0
Assembly Manual
T1 REF V2.0
T1 REF V2.0
CAUTION : do NOT overtighten the screws. Once resistance is encountered,
do not tighten more than one-quarter turn. Each fastener is different in
length or head shape, and putting them to each other is an excellent way to
identify them.
- The screw pack is intented for standard T1 (Sandwich).
TOOLS
Fasteners
M3-4 x6 STANDOFF-F6 x4
Fasteners : M3-4 x4
Fasteners : CSM3-5 x2
Fasteners:
M3-4 x4
6-32 x4
-
6-32 used for the power supply installation is not included
Fasteners : CSM3-8 x2
Fasteners : M3-4 x2
Fasteners:
- M3-4 x1
- CSM3-5 x3
- CSM3-8 x3
Fasteners : CSM3-5 x4
Fasteners : THUMB-6 x4
Brought to you by the FORMD Team.