CALIFORNIA AIR TOOLS EZ-1-2321 Automatic Drain Valve Installation Guide
- July 30, 2024
- CALIFORNIA AIR TOOLS
Table of Contents
CALIFORNIA AIR TOOLS EZ-1-2321 Automatic Drain Valve
Product Information
- Product Name: Auto Drain
- Usage: Drain system for tanks
- Compatibility: Center Motor
- Material: Plastic
Product Usage Instructions
- Step 1: Remove the auto drain from the center motor and take off the protective plastic cover.
- Step 2: Lay the unit down and extend the auto drain cord to reach the end of the tank.
- Step 3: Tilt the auto drain to insert it into the quick connect. The unit is now ready for use.
- Step 4: To disconnect the auto drain, drain the unit from above.
Frequently Asked Questions
Q: How do I remove the auto drain from the center motor?
A: Simply follow step 1 in the installation instructions provided in the manual. Remove the auto drain carefully to avoid damage.
Q: Can the auto drain be used with any type of tank?
A: The auto drain is designed for use with tanks. Ensure compatibility with your specific tank model before installation.
Q: What should I do if the auto drain gets stuck during installation?
A: If the auto drain encounters resistance during installation, gently adjust its position and try again. Do not force it as it may cause damage.
INSTALLATION INSTRUCTION
- Remove the auto drain from the center motor. Remove protected plastic.
- Ley the unit down, and stretch the auto drain cord to the end of the tank.
- Tilt the auto drain to the insert into the quick connect, the unit is ready to use. Drain the unit from above to disconnect the auto drain if needed.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>